Titek Dual Front Air Vents - Opinions

nogoodname

some simple nostrils closer to the emblems would help the G3's

M.Bonanni

I am a noob when it comes to aerodynamics so I may be completely off on this, but without that part of the bumper being sealed off I would think all of the pressure would bleed off down into the airstream coming through the front grille and not necessarily even get to the filters on the G3. Especially if the bend in the piping deflects the air towards the outside of the bumpers away from the filters. Again, I am an aero noob so if I am wrong just please explain why so I understand .

Here is a terrible rendering of what I picture in my head. The air going this way and then getting sucked down into the air stream going through the grille into the radiator instead of around to the filters.

__________________
MikeBonanni.com
Twitter: http://www.twitter.com/MikeBonanni
Facebook: http://www.facebook.com/MBonanni36
Function > Form

RCZ

Meh I would rather have them flowing right onto the filters too...also air flows into low/negative pressure so you would want negative pressure back there, not positive. When I get a hold of a new bumper I'm going to get crazy on the stock one

nogoodname

here's my visual aide for you all
only drew one nostril as the one posted on here.

M.Bonanni

^^^ I'm pretty sure that is not accurately scaled. You would have to cut your headlights in that case.

Lets go off of this photo and your imagination on where the vents would go in relation to the headlights.

__________________
MikeBonanni.com
Twitter: http://www.twitter.com/MikeBonanni
Facebook: http://www.facebook.com/MBonanni36
Function > Form

m4a1mustang

That pic right there backs up your drawing. You won't get much benefit from any direct airflow onto the filter... but it's always possible that the rush of fresh air into that area of the car would decrease the temp of the air being sucked in by the intakes and help a little bit.

IMO, those vents would be better with a setup like Steve's (Modshack). Just run some tubing from the vent to the airbox to get direct access to some fresh air.

__________________
- Steve

Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!)
LIKE us on Facebook!

nogoodname

Modshacks pipes would not work man, too many pipes in the front end.....modshack pipes for short tube and nostrils for long tube....



DDM, it still goes to the pipe....lol...you get the point here

Nikon FM

Off the top I can think of a couple things to consider:

The Stillen G3 intakes are tuned due to diameter, length, turbulence minimizing...just to name a few parameters.

More flow going into a "compartment" will cause an increase in pressure.

Especially under load the intake will draw air in.

My thought is that the front compartment may not be ambient temperature but it will be cooler than it was before with the holes/ducts.

If air is simply dumped into the stock box I'm not sure this would be a true RAM air system. Essentially there would be improvement only on cooler temps not neccessarily a RAM affect (unless car speed was significant).

just my without data to look at.

__________________

Buddy Revell: "One man's sooner is another man's later"

dad

That is not pretty! Every time you or someone looks at your car, their going to look at those ******* holes!

__________________

We can do without any article of luxury we have never had; but once obtained, it is not in human nature to surrender it voluntary.

Caravanshaka

kinda like looking at the back of our car and seeing that ***-hole

Caravanshaka

Ok, my idea would involve a little extra cutting, but might be more useful:

the foam in the front is where the black part of our stock bumper is, kinda where the front license plate would go if you put it on. I would cut a rectangular hole in the bumper in that black area, which would make it subtle, then cut the foam in a wedge shape to flow air up towards the filters. could find some black plastic molded in the right shape and 95% of people looking at your car wouldn't even notice it.

Now, looking at the picture. The blue box is where the bumper is cut out. The red area is where you would shape the foam to direct air from the box, up and out towards the filters. You could do some thin sheet plastic to make a nice curvey back piece for optimum flow. Don't have to worry about rain either, it won't travel up

Modshack

Actually I think they would work fine. Instead of bending the hoses around behind the impact bar and into the Airbox pass-through, just route them toward the filters. You could build a simple Manifold/Hose bracket to mount to and direct the air sorta like this:

__________________

Steal my car! (SOLD)...Now Porsche Cayman S
Oil Cooler DIY: Here!

Modshack

Excellent idea! This could be done witout visually hacking up the front. YOu could almost make a grill disappear in the black area. Expanding on that, there is a Corvette part called a Vette-air that may have application here.. Pattern cut this into the black area, do a little foam carving and you'd have a nice forced feed right to the Filters.. I used one of these on my Vette to feed air to a custom intake. Worked great..

__________________

Steal my car! (SOLD)...Now Porsche Cayman S
Oil Cooler DIY: Here!

FuszNissan

That looks perfect. Nice find

__________________
Mods: Too Many to list!
LouFuszNissan
ZDAYZ 2012

m4a1mustang

I think you misunderstood.

Modshack uses short tubes, therefore the nostrils with pipes attached could be used very easily to direct fresh air into the airboxes.

__________________
- Steve

Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!)
LIKE us on Facebook!