FREE! GTMat Automotive Sound Deadener

GTMat · 10-09-2012, 11:24 AM

Quote:

Originally Posted by DarkJak

Installed 10 sq ft today in my spare time. Took about an hour. I didn't have any tools for the side panels, but I was able to get it in most of the hatch area. I've yet to take it on a full drive, but it did seem to reduce the volume in-cabin for the drone I was having and the rattle that comes and goes for me (seems like somewhere, there's a penny that fell in...)

If you need more, let me know how much.

Thanks for participating!

Quote:

Originally Posted by afbunn

Mine's on the way and I'll post up once I get it installed n stuff.

GTMat · 10-11-2012, 10:34 AM

rnc1688 · 10-11-2012, 11:15 AM

just ordered 50FT

GTMat · 10-11-2012, 12:14 PM

Quote:

Originally Posted by rnc1688

just ordered 50FT

Thank you for your order!

GTMat · 10-12-2012, 04:08 PM

Launching our new product, GT Liqui-Damp! What is GT Liqui-Damp?

GT Liqui-Damp Sound Deadener is a super thick, liquid sound-dampening product that when cured creates a durable, vibration-absorbing layer of sound insulation. It fills in all the cracks and soaks up all the noise, silencing unwanted rattles and allowing your music to rule the airwaves! Dollar for dollar, nothing compares to the value of liquid sound deadener.. Order your gallon of GT Liqui-Damp today!

Benefits & Features.

GT Liqui-Damp

Impressive Bass Improvement
Nominal 32 Mil Thick per Coat
High-Temp Superior Adhesion
Kill Unwanted Noise, Rattles, Vibrations
Reduce Distortion
Reduce Exhaust and Engine Noise
Easy Application by Brush, Spray, Trowel
Additional Layers add Additional Vibration Dampening
Use Anywhere - Doors, Trunks, Side Panels, Hoods, Roofs, Firewalls, Floors
Sandable, Paintable Surface
Dries to Touch in 1 HR
Chemical Resistant
Durable, Waterproof, Permanent
Non-Toxic, Non-Flammable, Non-Hazardous
Sound AND Heat Insulation
Massive DB & SPL Gains
Low Cost Solution
Tested, Proven, Guaranteed
Light light gray or tan Color
Dries Odorless
Cleans Up with Water
Use Alone or in Combination with GTMAT
Toll Free Support 1-855-GT-SOUND!

ts-c63 · 10-12-2012, 04:49 PM

Just installed my sample of Gtmat! Took me only an hour to and was super easy to intall. I havent driven around with it yet, so I will post again tonight with a quick review and pics. Thanks again for the sample =)

GTMat · 10-12-2012, 04:54 PM

Quote:

Originally Posted by ts-c63

Just installed my sample of Gtmat! Took me only an hour to and was super easy to intall. I havent driven around with it yet, so I will post again tonight with a quick review and pics. Thanks again for the sample =)

Looking forward to the review.

ts-c63 · 10-12-2012, 08:54 PM

So as I said before I intalled my sample for Gtmat today. I went for a quick drive and I can say it really did quite down the interior! I was getting this really annoying drone inside the cabin everytime I would get up to 2800 rpm. Intall was very simple cut the 10sqft roll into 1x1 sheets, wiped down the trunk with alcohol, and simply apply each sheet.

I will soon order a 25sqft roll of 80mill to really cover the entire rear.

dmhenderson · 10-12-2012, 09:11 PM

Mine arrived today. Wedding to attend tomorrow but I know what I'm doing on Sunday before the game!

Pintsize725 · 10-12-2012, 09:47 PM

Quote:

Originally Posted by ts-c63

So as I said before I intalled my sample for Gtmat today. I went for a quick drive and I can say it really did quite down the interior! I was getting this really annoying drone inside the cabin everytime I would get up to 2800 rpm. Intall was very simple cut the 10sqft roll into 1x1 sheets, wiped down the trunk with alcohol, and simply apply each sheet.

I will soon order a 25sqft roll of 80mill to really cover the entire rear.

Call us and use your coupon! We are open this weekend.

Quote:

Originally Posted by dmhenderson

Mine arrived today. Wedding to attend tomorrow but I know what I'm doing on Sunday before the game!

Thanks for the participation sir!

GTMat · 10-15-2012, 11:42 AM

Bumpy bump

MD-370z · 10-15-2012, 01:16 PM

does the free deal work for customers in Canada?

GTMat · 10-15-2012, 01:18 PM

Quote:

Originally Posted by MD-370z

does the free deal work for customers in Canada?

Unfortunately we cannot ship for free to Canada. The product is free but shipping will run you $23. If you are interested, please give us a call.

NickTurnon · 10-16-2012, 12:32 AM

Looking to purchase some of this stuff to take care of my drone with the short tails. PM me shipped to 85262 AZ

Thank you!

SouthArk370Z · 10-16-2012, 07:10 PM

I ordered the free sample and three days later it was on the front porch - pretty fast for a freebie. It even came with a free roller (reasonably good quality, too. Not some POS cheapie)!
Spent last weekend installing the stuff. Cutting the sheet was fairly easy once I gave up on cutting it with a knife and switched to scissors. I was only able to cover the rear part of the wheel wells, the vertical panel between the taillights, part of the brace for the strut towers, and a few odds and ends with the 10 sq ft provided.
This was my first time for this kind of project and the results ain't pretty. There are some screws sticking up on the floor of the spare tire area that were a PITA, but I managed to get the hang of neatly poking a small hole in the thick foil after 3-4 tries.
All-in-all, it was pretty easy after a relatively short learning period.
I had the interior panels removed/replaced by my favorite body shop. On the way home I was terribly disappointed in the lack of noise reduction. As I was pulling into the garage, I noticed the panel that goes over the spare tire and the two pieces of carpet that go on top of that. Reinstalled the carpet and discovered that there _was_ quite a bit of noise reduction.

Thanks GTMat!

I'm giving serious thought to ordering another 10 sq ft or so and finishing the area behind the seats, particularly the front of the wheel wells. I might even do the doors.

10-11-2012, 10:34 AM	#137 (permalink)
GTMat Enthusiast Member Join Date: Aug 2012 Location: Austin, TX Posts: 252 Drives: R8 / Z34 Rep Power: 13	__________________ Tracie@GTSound \| 1-855-GTSOUND \| BUY GTMAT HERE!

10-12-2012, 04:08 PM	#140 (permalink)
GTMat Enthusiast Member Join Date: Aug 2012 Location: Austin, TX Posts: 252 Drives: R8 / Z34 Rep Power: 13	Launching our new product, GT Liqui-Damp! What is GT Liqui-Damp? GT Liqui-Damp Sound Deadener is a super thick, liquid sound-dampening product that when cured creates a durable, vibration-absorbing layer of sound insulation. It fills in all the cracks and soaks up all the noise, silencing unwanted rattles and allowing your music to rule the airwaves! Dollar for dollar, nothing compares to the value of liquid sound deadener.. Order your gallon of GT Liqui-Damp today! Benefits & Features. GT Liqui-Damp Impressive Bass Improvement Nominal 32 Mil Thick per Coat High-Temp Superior Adhesion Kill Unwanted Noise, Rattles, Vibrations Reduce Distortion Reduce Exhaust and Engine Noise Easy Application by Brush, Spray, Trowel Additional Layers add Additional Vibration Dampening Use Anywhere - Doors, Trunks, Side Panels, Hoods, Roofs, Firewalls, Floors Sandable, Paintable Surface Dries to Touch in 1 HR Chemical Resistant Durable, Waterproof, Permanent Non-Toxic, Non-Flammable, Non-Hazardous Sound AND Heat Insulation Massive DB & SPL Gains Low Cost Solution Tested, Proven, Guaranteed Light light gray or tan Color Dries Odorless Cleans Up with Water Use Alone or in Combination with GTMAT Toll Free Support 1-855-GT-SOUND! __________________ Tracie@GTSound \| 1-855-GTSOUND \| BUY GTMAT HERE! Last edited by GTMat; 10-15-2012 at 04:15 PM.

10-12-2012, 04:49 PM	#141 (permalink)
ts-c63 Enthusiast Member Join Date: Feb 2011 Location: nyc/nj Posts: 384 Drives: 2012 370z 7At Rep Power: 14	Just installed my sample of Gtmat! Took me only an hour to and was super easy to intall. I havent driven around with it yet, so I will post again tonight with a quick review and pics. Thanks again for the sample =) GTMat likes this.

10-12-2012, 08:54 PM	#143 (permalink)
ts-c63 Enthusiast Member Join Date: Feb 2011 Location: nyc/nj Posts: 384 Drives: 2012 370z 7At Rep Power: 14	So as I said before I intalled my sample for Gtmat today. I went for a quick drive and I can say it really did quite down the interior! I was getting this really annoying drone inside the cabin everytime I would get up to 2800 rpm. Intall was very simple cut the 10sqft roll into 1x1 sheets, wiped down the trunk with alcohol, and simply apply each sheet. I will soon order a 25sqft roll of 80mill to really cover the entire rear. GTMat likes this.

10-12-2012, 09:11 PM	#144 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Mine arrived today. Wedding to attend tomorrow but I know what I'm doing on Sunday before the game! GTMat likes this. __________________

10-11-2012, 11:15 AM	#138 (permalink)
rnc1688 Base Member Join Date: Sep 2012 Location: new york Posts: 38 Drives: 12 touring+Nav+sport Rep Power: 13	just ordered 50FT

10-15-2012, 11:42 AM	#146 (permalink)
GTMat Enthusiast Member Join Date: Aug 2012 Location: Austin, TX Posts: 252 Drives: R8 / Z34 Rep Power: 13	Bumpy bump __________________ Tracie@GTSound \| 1-855-GTSOUND \| BUY GTMAT HERE!

10-15-2012, 01:16 PM	#147 (permalink)
MD-370z Base Member Join Date: Apr 2009 Location: canada Posts: 137 Drives: 370z,MB, sport, m6, Rep Power: 16	does the free deal work for customers in Canada?

10-16-2012, 12:32 AM	#149 (permalink)
NickTurnon A True Z Fanatic Join Date: Jul 2011 Location: Scottsdale Age: 33 Posts: 1,636 Drives: 09 BS 7AT 370z Rep Power: 18	Looking to purchase some of this stuff to take care of my drone with the short tails. PM me shipped to 85262 AZ Thank you!

10-16-2012, 07:10 PM	#150 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	I ordered the free sample and three days later it was on the front porch - pretty fast for a freebie. It even came with a free roller (reasonably good quality, too. Not some POS cheapie)! Spent last weekend installing the stuff. Cutting the sheet was fairly easy once I gave up on cutting it with a knife and switched to scissors. I was only able to cover the rear part of the wheel wells, the vertical panel between the taillights, part of the brace for the strut towers, and a few odds and ends with the 10 sq ft provided. This was my first time for this kind of project and the results ain't pretty. There are some screws sticking up on the floor of the spare tire area that were a PITA, but I managed to get the hang of neatly poking a small hole in the thick foil after 3-4 tries. All-in-all, it was pretty easy after a relatively short learning period. I had the interior panels removed/replaced by my favorite body shop. On the way home I was terribly disappointed in the lack of noise reduction. As I was pulling into the garage, I noticed the panel that goes over the spare tire and the two pieces of carpet that go on top of that. Reinstalled the carpet and discovered that there _was_ quite a bit of noise reduction. Thanks GTMat! I'm giving serious thought to ordering another 10 sq ft or so and finishing the area behind the seats, particularly the front of the wheel wells. I might even do the doors.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Make you sound system sound better? Dynamatt the doors	DCNISMO	Audio & Video	11	07-30-2012 07:46 PM
Free Lugs, Free Center Caps, and Free Shipping	KamiSpeed	Tires/Wheels	2	11-26-2011 05:29 PM
high frequency sound/annoying as hell sound	Santent	Nissan 370Z General Discussions	4	12-22-2009 10:59 AM
Automotive Uno	cow	The Lounge (Off Topic)	49	06-13-2009 08:41 PM