Nissan 370Z Forum  

Rear Foglight - Running light AND brake light

I've read through all the rear foglight threads here and on other sites. I don't know if I'm looking for an impossible function or just an undesired one, but this

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Exterior & Interior


Like Tree1Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 08-02-2012, 04:37 PM   #1 (permalink)
Base Member
 
mbowler's Avatar
 
Join Date: Jan 2012
Location: St Louis
Posts: 73
Drives: '12 370z PW M6
Rep Power: 13
mbowler is on a distinguished road
Default Rear Foglight - Running light AND brake light

I've read through all the rear foglight threads here and on other sites. I don't know if I'm looking for an impossible function or just an undesired one, but this is how I want to wire it up.

Scenario 1 - Daytime/No lights on
- foglight off, except while braking

Scenario 2 - Nighttime/Tail-lights on
- foglight on while lights on
- foglight brighter when braking.

No switch up front, just activated by brake/tail-lights.

It looks like the harnesses from Z1 will allow me to do both with their "long" harness, but it also comes on with the turn signal, which I do not want.
Ok. I just called Z1. It's EITHER brake/turn signal OR running lights, not both.
JDM Fairlady Z Reverse Fog Light

Is there a way to make this work?

Thanks.

Last edited by mbowler; 08-02-2012 at 05:14 PM. Reason: adding infomation
mbowler is offline   Reply With Quote
Old 08-02-2012, 05:35 PM   #2 (permalink)
1st
A True Z Fanatic
 
1st's Avatar
 
Join Date: Jul 2012
Location: I 80 Biz U.S. 50
Posts: 1,708
Drives: Platinum Z
Rep Power: 1616
1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute
Default

Ive looked myself and nothing. This is exactly how I want this to work also. I dont want that fog switch or the stalk switch. You hit it right on the money is there a way anybody?
1st is offline   Reply With Quote
Old 08-02-2012, 05:49 PM   #3 (permalink)
Base Member
 
mbowler's Avatar
 
Join Date: Jan 2012
Location: St Louis
Posts: 73
Drives: '12 370z PW M6
Rep Power: 13
mbowler is on a distinguished road
Default

I actually think I just found the answer buried in one of the long threads. Here is the link to the very post.

DIY: of complete FOG LAMP install

The key it seems is that we have to replace the 7440 socket with a 7443 socket. I just ordered my fog light. I'll figure it out.
mbowler is offline   Reply With Quote
Old 08-02-2012, 10:35 PM   #4 (permalink)
Base Member
 
Join Date: Oct 2010
Location: Usa
Posts: 32
Drives: 2010 370Z
Rep Power: 15
ryan370zpower is on a distinguished road
Default

My rear fog light works exactly like this. It's connected to brake light and tail lights. When I brake it gets super bright.
ryan370zpower is offline   Reply With Quote
Old 08-02-2012, 10:36 PM   #5 (permalink)
Base Member
 
Join Date: Oct 2010
Location: Usa
Posts: 32
Drives: 2010 370Z
Rep Power: 15
ryan370zpower is on a distinguished road
Default

FYI I got mine through clearcorners.com. Works perfectly
ryan370zpower is offline   Reply With Quote
Old 08-02-2012, 11:22 PM   #6 (permalink)
Base Member
 
FreshFish's Avatar
 
Join Date: Nov 2010
Location: Irvine, CA
Posts: 201
Drives: on marshmallows
Rep Power: 14
FreshFish will become famous soon enough
Default

I bought a 7443 socket on ebay and modded the JDM rear fog. Dremel and some cutting but nothing major. 7443 bulbs are readily available at any autoparts store. I followed the DIY. I eventually want to run a switch to the wiring to cut it off completely but I like it a lot! The subtle light when the headlights are on(w/o brakes) matches perfectly with the rest of the tail lights.
__________________
// nismo // Berk // PW JDM // WORK Meister S1 3pc // TOYO PROXES // POWERTRIX //
FreshFish is offline   Reply With Quote
Old 08-02-2012, 11:36 PM   #7 (permalink)
1st
A True Z Fanatic
 
1st's Avatar
 
Join Date: Jul 2012
Location: I 80 Biz U.S. 50
Posts: 1,708
Drives: Platinum Z
Rep Power: 1616
1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute1st has a reputation beyond repute
Default

Quote:
Originally Posted by ryan370zpower View Post
FYI I got mine through clearcorners.com. Works perfectly
I went to this link that you mentioned. 09-XX NISSAN Z34 370Z (Fairlady Z) — J-spec High-Power LED Rear Fog Light
It says plug and play with no messy external wiring and it works just like the thread starter stated. Is this the case? $450.00 for the led one is expensive. Any idea how much the regular one is? It’s not listed.

Last edited by 1st; 08-02-2012 at 11:46 PM.
1st is offline   Reply With Quote
Old 08-03-2012, 10:41 PM   #8 (permalink)
Base Member
 
Join Date: Oct 2010
Location: Usa
Posts: 32
Drives: 2010 370Z
Rep Power: 15
ryan370zpower is on a distinguished road
Default

I believe he opens up the fog light and customizes the entire assembly with more, brighter LEDs. I would def call mike from there. He knows his stuff
ryan370zpower is offline   Reply With Quote
Old 08-20-2012, 02:35 PM   #9 (permalink)
Base Member
 
mbowler's Avatar
 
Join Date: Jan 2012
Location: St Louis
Posts: 73
Drives: '12 370z PW M6
Rep Power: 13
mbowler is on a distinguished road
Default

Ok, well, I got it working. I'll do a quick write-up of how I pieced it together. My goal was to retrofit a 3-wire 7443 socket into the existing hole of the rear foglight without modifying the foglight (ie. the expensive part).

First, I purchased a couple of 7443 sockets from HERE
(Scroll down until you see the actual socket, which looks like THIS)
As of this writing, it is located 2nd from the bottom of the page. You only need one to make this work, but I bought an extra in case I messed up or needed to experiment.

I purchased the OEM rear foglight assembly as well. Choose your vendor as you will. I ordered from the Z Store. The foglight assembly comes with a 7440 socket (2 wire).

Let's get started.

Here is a picture of the 7440 socket (gray) next to the new 7443 socket (tan).


and another shot straight on


the key to the locking mechanism on the OEM socket is the triangle engagement area (outlined in green)


and here is the opening in the lamp assembly.


Basically you insert the socket and the blocking tab is at position A. You then turn the socket about 1/6 of a turn until the blocking tab hits the 'wall' at position B. This causes the tips of the triangle engagement area to be under the flat pieces of the triangle in the foglight assembly...in other words, its locked in place and not falling out.


So now we have to replicate this locking action with our 7443 socket. What are the problems we have?

1) The gasket that comes with the 7443 socket is too large to fit the hole of the foglight assembly.
SOLUTION: Use the gasket from the OEM 7440 socket.

2) There is no triangle engagement area on the 7443 socket, only 2 sets of 2 different types of tabs.
SOLUTION: Dremel or file the tabs on the 7443 socket, see below.

3) The diameter of the 7443 socket is too large to allow it to recess into the foglight assembly.
SOLUTION: Dremel or file the outer ring on the 7443 socket, see below.

4) There is no blocking tab to keep the 7443 socket from spinning all the way around in the foglight assembly due to vibration and falling out
SOLUTION: You guessed it, Dremel or file, see below.

Here is a top view of your new 7443 socket.


The diameter of the 7443 socket is too large to fit into the round recess in green


This is actually a good thing! By removing the extra material, we have an opportunity to create a blocking tab, but first, we need to address the tabs which will take the place of the engagement triangle.

Here we see one type of tab (of which there are two, one each on opposing sides).


And here is the other type (again, two tabs, one each on opposing sides)


Now lets orient our workpiece. I just put it on a piece of paper and used a permanent marker to write on the socket and the paper so I didn't get confused. When looking at the top of the socket, you will see two 'wings' across from each other. I have drawn an arrow to one of them (they are oriented at 9 and 3). At 12 there is a smaller 'wing' with an arrow in front which you can just barely see to the left of the wires. At 6 there is no wing, just a little arrow which you cannot see because I drew an X over it.


You are going to cut/file/shave/Dremel the tabs at the positions indicated with "cut". (at 3 and 6). You are NOT going to touch the other two tabs at 9 and 12.

You will then end up with something like this (ignore the writing on the paper, it is not relevant to the picture)


Congratulations! You have created an engagement area that will lock the socket in the foglight assembly when twisted.

Now let's focus on issues #3 and #4. We need to reduce the diameter of the socket and we need to add a blocking tab.

Well, remember the arrow from this picture?


That arrow is pointing to the wing which becomes our new blocking tab. What you will want to do is slowly reduce the diameter of your socket, EXCEPT FOR THE PIECE THAT THE ARROW IS POINTING AT. Be sure to do this a little at a time and test for fitment in the foglight assembly often.

What you will end up with is a piece that looks like this


Now we are in the final stretch. Discard the gasket that came with your 7443 socket and place the OEM gasket from the 7440 socket on your modified 7443 socket.

Place your new masterpiece in the foglamp assembly (pay attention to the location of the blocking tab)


Then turn it until the blocking tab hits the 'wall'.


Give it a tug to make sure the engagement tabs are locking the socket in place. All done. Good job.

Now you need to go wire it up. There are numerous guides on how to access the power wires for this so I will leave that out. One additional graphic I will add to this is the one created by forum member Mr_Z. This tells you specifically how to wire up the 7443 socket. His graphic shows the addition of a flashing module, but if you don't want that like myself, just draw a line straight through it.



For those who want to experiment, you 'might' be able to get away with only shaving 1 tab off which would provide even more locking action.

Also, I apologize for this, but I cannot recall which of the wires on the 7443 socket was for high/low filament. I already have everything heat shrinked, in split-loom, and taped.

Hopefully this is helpful to some people.

UPDATE 8/21/12
Well, I drove the car last night for the first time. As soon as it got dark enough for the lights to come on, all engine power was cut back. The engine ran, but it was behaving as if the car's tires were sliding and ABS was pulling throttle response. The ABS light was on as well as the tire slipping light.

I did some investigation and determined that I had wired up the 7443 socket wrong, so here is what the colors are (NOTE: I have no idea if this is universal or unique to the ones I got from this vendor).

Green w/yellow = Ground (labeled "A" on back of the socket)
Black w/white = Low filament (tail light) (labeled "B" on back of the socket)
Red w/blue = High filament (brake light) (labeled "C" on back of the socket)

I have edited the excellent graphic by Mr_Z as you will see below so you can see how the socket pigtails connect to the wires in the brake light harness. As you can see, this is not intuitive, however, that is no excuse. My testing should have been more thorough initially.


Last edited by mbowler; 08-21-2012 at 04:53 PM. Reason: Add additional detail to prevent problems for others
mbowler is offline   Reply With Quote
Old 08-20-2012, 11:37 PM   #10 (permalink)
A True Z Fanatic
 
Felix 808's Avatar
 
Join Date: Oct 2011
Location: Camarillo, CA
Posts: 1,063
Drives: 2011 PW/Grey T/S 7AT
Rep Power: 2807
Felix 808 has a reputation beyond reputeFelix 808 has a reputation beyond reputeFelix 808 has a reputation beyond reputeFelix 808 has a reputation beyond reputeFelix 808 has a reputation beyond reputeFelix 808 has a reputation beyond reputeFelix 808 has a reputation beyond reputeFelix 808 has a reputation beyond reputeFelix 808 has a reputation beyond reputeFelix 808 has a reputation beyond reputeFelix 808 has a reputation beyond repute
Default

Great write up mbowler! Rep point your way

Quote:
Originally Posted by mbowler View Post
Also, I apologize for this, but I cannot recall which of the wires on the 7443 socket was for high/low filament. I already have everything heat shrinked, in split-loom, and taped.
Hopefully this is helpful to some people.
This can be figured out by inserting bulb & running one lead to ground & 1 of the 2 to your battery. The one that glows brightest should be hooked to brake light.
__________________
Semper Fi

Μολὼν λαβέ
Felix 808 is offline   Reply With Quote
Old 12-02-2012, 07:18 AM   #11 (permalink)
Base Member
 
yoayo's Avatar
 
Join Date: Jan 2011
Location: san diego
Posts: 19
Drives: 370z
Rep Power: 14
yoayo is on a distinguished road
Default

thanks for the brightness idea. I am going to combine this with some relay for the blinking reverse that will be perfect.
Thanks a lot
yoayo is offline   Reply With Quote
Old 12-02-2012, 03:03 PM   #12 (permalink)
Enthusiast Member
 
Join Date: May 2010
Location: Az
Posts: 414
Drives: PW Maro Z
Rep Power: 15
maro is on a distinguished road
Default

mine work like scen 2 but not scen 1,,
how do i make it as brake light on daytime?
maro is offline   Reply With Quote
Old 12-02-2012, 06:16 PM   #13 (permalink)
A True Z Fanatic
 
Baer383's Avatar
 
Join Date: Aug 2010
Location: Lawrenceville,Ga
Posts: 4,293
Drives: My foot up your azz
Rep Power: 30
Baer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond repute
Default

Quote:
Originally Posted by mbowler View Post
Ok, well, I got it working. I'll do a quick write-up of how I pieced it together. My goal was to retrofit a 3-wire 7443 socket into the existing hole of the rear foglight without modifying the foglight (ie. the expensive part).
All you need to do is use a brake light/tail light socket from a Honda Pilot.
It still has the same shape as the OE one no grinding
SterlingDrive likes this.
__________________
2013 ZL1

754 rwhp 747 rwtq
Baer383 is offline   Reply With Quote
Old 12-03-2012, 08:51 AM   #14 (permalink)
Base Member
 
mbowler's Avatar
 
Join Date: Jan 2012
Location: St Louis
Posts: 73
Drives: '12 370z PW M6
Rep Power: 13
mbowler is on a distinguished road
Default

That's good to know. Wish I knew that when I did this. I've had no issues with mine but ill probably switch it out for the Pilot one for an OEM look.
__________________
2012 PW 6MT Touring, Sport, Nav, Persimmon
Performance Clutch Helper Spring - K&N Panel Filters - Z1 Post MAF Tubes Appearance 3M Carbon Fiber Di-Noc Rear Diffuser - Dual Element Rear Foglight - GTR Ignition Button - Xpel Self-Healing Film - Optimum Opti-Coat 2.0 Audio/Visual Car Kit Co Bypass Kit
mbowler is offline   Reply With Quote
Old 12-03-2012, 09:35 PM   #15 (permalink)
Enthusiast Member
 
asdfsammich's Avatar
 
Join Date: Dec 2011
Location: Southern California
Posts: 456
Drives: 09 370Z SR MT
Rep Power: 13
asdfsammich is on a distinguished road
Default

Nice work bowler. That's exactly how I wanted mine to behave.


Tapatalk & such etc
asdfsammich is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Have a problem brake light and traction light comes on martin82 Brakes & Suspension 11 11-22-2016 10:40 PM
wiring rear fog light as brake light Parrotguy Nissan 370Z Roadster (Convertible) 12 09-03-2015 11:34 AM
Anyone installed the rear fog light as a brake light on a roadster? Lee123 DIY Section (Do-It-Yourself) 4 05-01-2010 08:53 PM
Rear center-low brake light getawaydriver Exterior & Interior 1 02-16-2010 09:12 AM
The little plastic square on rear bumper above fog/brake light..... LattimerII Exterior & Interior 3 09-23-2009 07:48 PM


All times are GMT -5. The time now is 11:31 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2