Anyone have the EVO-R 3 piece lip?
 

I'm currently debating between the Carbonsignal TS-rep, and the EVO-R 3pc lip. I only have the EVO-R fang cover at the moment, and I prefer to keep the fangs covered up. I'm looking for more pictures of the EVO-R lip to make up my mind. :tiphat:

Also, how has the lip held up? I would probably paint the side pieces body color, or I could just have it all in carbon fiber.

http://ccastro.smugmug.com/Automotiv...DSC00025-L.jpg

http://ccastro.smugmug.com/Automotiv...DSC00056-L.jpg

no problems here

How does the middle section attach? I know there are screws on the bottom, so there must be 3m tape as well, correct?

I have had no problem with my EVO-R 3 piece lip. It's great!

Attachment 51066Attachment 51067Attachment 51068

And yes, mounts with 3M tape and screws.

I've been trying to order this lip and nobody has it in stock right now :(.

just screws into place and is between the two outer pieces with no problems... nice and secure...

:Lights up Cigarette:
Yep, she's the one!
:tup:

I love my Evo-R lip :tup:

http://farm8.staticflickr.com/7227/7...1ea202a2_c.jpg

http://farm9.staticflickr.com/8143/7...73933345_c.jpg

Sweet pics. I'm working on these lip ASAP. Currently all out.

Fantastic shots of the lip, guys. It's really selling it for me, haha. I still can't decide between the Carbonsignal and this one.

EVOR, I currently have your fang cover installed. Would I just put the center piece over the fang cover? Or how would that work?

I think you have to cut the fang cover for it to fit w/ the lip.

Mine's been holding up great as well :tup:

http://i1203.photobucket.com/albums/...p/IMAG1005.jpg

http://i1203.photobucket.com/albums/...p/IMAG1008.jpg

http://i1203.photobucket.com/albums/...p/IMAG1009.jpg

I was afraid of that. I feel like I could part out the fang cover, and get the CS lip for a good price at that point. Decisions, decisions.

Have you considered painting 'em instead of covering? I have to find the pics, but there is a really sweet PW on here w/ black fang area and PW painted Evo-R lip. Looks so good. I'll look for the pics...

I believe the fang cover is CF so it wouldn't work out the same. You could get it wrapped with Di-Noc if you want the CF look.

Follow-up to my previous post...

from member julianpayne's albums:

http://www.the370z.com/members/julia...o-pit-lane.jpg

http://www.the370z.com/members/julia...2-370z-001.jpg

my center is carbon fiber and my fangs are painted...

Anyone have this with the fangs not blacked out? Would love some good pics.

Are this being held up by just a double sided tape? Are this functional in a sense it gives a front downforce or just cosmetic?

look on the first page

I'm not sure how much, if any downforce it provides. It is held on by self tapping screws and double sided tape.

Pretty much just for looks.

Most lips are gonna be for looks, and the only one that I know that claims downforce is the stillen one, although I doubt it'd be anything more than a few lbs at high speeds.

did you color match the sides?

I had the whole lip painted magnetic black.

lol should have been more specific, does anyone have have this entire lip color matched, without the fangs blacked out, and not on a black z?

Install with double side on top sides and many screws on the bottom of the lip.

Here are a couple of pics of mine

http://www.the370z.com/members/drago...12-car-014.jpg

http://www.the370z.com/members/drago...12-car-013.jpg

http://www.the370z.com/members/drago...12-car-011.jpg

I like the look of that with the Nismo style spoiler :yum:

This is true... so much in fact that it may be causing strain on the actual lip.... there is a thread open discussing the issue.

I can personally attest to the difference in handling at speeds over 45 mph. You can really feel the added grip on the front wheels when driving :tiphat:

Thanks. It is the evo-r high wing. :tup:

Looks like the 2013 bumper without the LEDs

I agree. I don't like the fangs blacked out but thats just me. I think the EVO-R lip would look good with the fangs left white in my case as well. I will be making that decision sometime in the near future. I wanted the Stillen lip but I hear all the stories of it sagging. No one likes saggy ti... I mean lips.

3 pcs black FRP are in stock now!

yo this ish looks :yum:

if the lip was all black whoooo it would be bangin :icon17:

Why hello! I'll just bring this right back to the top. I likey. Strongly concidering this for a white 2010 Z. Do they come pre-painted?

No they do not

Here's mine
 

EVO-R 3 Piece Lip, CF Center.

I have mine not installed yet. The finish is awesome you can mount it on the car straight out of the box. I thought about wrapping it and some sideblades I bought from another company but im going to paint them both.