Oracle LED kit? Thoughts? anybody use it?

Nut_N_Much · 07-17-2012, 08:10 PM

Quote:

Originally Posted by gy954

I looked at the DIYs and got worried about cracking the lights when trying to open them up. Seems like some of the guys (or gals) had that problem. I put DRLs on my Z, so I have had the front bumper off. I am very much looking forward to hearing how your build goes. Maybe you'll inspire me, because I sure do like that look. Good Luck!!!

Pulling the lights apart was scary. The hole time I was worried about braking the plastic. The light housing has plastic tabs along the sides once to get those unclipped just peal them back. Takes a lot of strength to pull apart, if it cools off in the middle of it put it back in the box and heat it up again. After the first one you see how strong the lights are just don't use screw drivers or tools to pry with that will warp or brake the plastic.

Quote:

ericzmyers
Oracle LED kit? Thoughts? anybody use it?
Hi all, Ive been diligently studying some of the headlight mods on the forums and am really anxious to do mine. Ive talked with a few members and have heard nothing about this one particular kit....

Nissan 370Z ORACLE Headlight Halo Kit

this looks like the route im gonna go, just for the simplicity of it all..... Have any of ya used this set up? ANy thoughts on the equipment/company?

Eric Z.

Thank you for the props, subscribed. Can't wait to see how it all comes together..

Its gona look bada_s brother.

ericzmyers · 08-18-2012, 03:28 PM

So I've been out of the loop for a min.

i did however complete a total sound deadening project. GTMAT.com is the ****!

I ordered the light mod (370 Specific) and a (backlight) amber switch from AAC.com.

Initial impression of this company is NOT so good.

upon completion of my order i received a email from a company rep. they stated they needed:
1. Credit card authorization form
2. a scanned copy of my ID
3. a scanned copy of my card

I said- i will NOT send you any of that, you can process my order or i will shop else where.

I still need to contact the company and make sure they are aware of the email.

After all that he company double charged me. i have two pending charges for $199

Parts are scheduled to be delivered on thursday and i will start the mod on saturday.

Mod plan
1. get at the lights (drop the front facia)
2. pull the lights.
3. open the lights
4. separate the components
5. black out the housings
6. paint the lens housings red
- gonna also pull the engine bar and paint that red (ZR1 hose kit, Red coming soon and red effects LEDs)

Ill post pics and thoughts as i do it.

Vichtz · 08-19-2012, 02:23 AM

I just bought the LED halo kit from the link posted on the opening page. No issues and package got here in a timely manner. Although, i did have a question. It lists several things like balasts and the like, but all that came were the 2 rings. Thats it. The package it came in said the shipping weight was only one pound and indeed the package was just a single pound. Still seemed kind of odd.

RyanWest · 08-19-2012, 02:54 AM

Quote:

Originally Posted by Vichtz

I just bought the LED halo kit from the link posted on the opening page. No issues and package got here in a timely manner. Although, i did have a question. It lists several things like balasts and the like, but all that came were the 2 rings. Thats it. The package it came in said the shipping weight was only one pound and indeed the package was just a single pound. Still seemed kind of odd.

I assume you just run the power wires to a 12v, then put a switch in between.

How many wires are coming off the Halo's?

can you upload a picture?

ericzmyers · 08-19-2012, 01:55 PM

Quote:

Originally Posted by Vichtz

I just bought the LED halo kit from the link posted on the opening page. No issues and package got here in a timely manner. Although, i did have a question. It lists several things like balasts and the like, but all that came were the 2 rings. Thats it. The package it came in said the shipping weight was only one pound and indeed the package was just a single pound. Still seemed kind of odd.

they advertise it as plug and play? How are the instructions?

FireDan50 · 08-19-2012, 02:07 PM

sub'd

Vichtz · 08-19-2012, 04:04 PM

instructions are kind of vehicle specific. With these listed as 370z/350z instructions. Also, they are emailed in a pdf form, not actual hard copy. Its just red and black wires and the rings. Typical stuff, I'll probably just splice them into the parking lights though, just for ease of use and the ability to control the brightness of the gauges (so I can have my park lights on and still see my gauges during the day). All in all, probably not worth 170 bucks, so you might wanna check the other thread and see how much the rings cost separately from lightwurks, cause this comes with nothing but the rings. I attached 2 pdfs, but the 350z-370z instructions are too large to attach. Also added a pic of the rings that it came with.

Nut_N_Much · 08-19-2012, 10:16 PM

LightWurkz charged me $140.00 for the set and $25.00 more for the smaller second set. They came wired up to a control box that pluged into a ground and 12v source.

There rings are 1/4 thick, yours looks thinner and would sit deeper into the shroud for a clean look.

Vichtz · 08-19-2012, 11:39 PM

yea they seem well made, but i figured there would be more to it

ericzmyers · 08-20-2012, 06:44 PM

hmmmm, we shall see. Mine are on track for thursday delivery.

AND NOW THE COMPANY HAS TRIPLE CHARGED MY ACCOUNT! Three charges for $190, not to happy about that.

i will begin the install on saturday morning. Gonna read back through Nut_N_Much thread and get the product list from his stuff.

On the fence about the shroud paint.......

Nut_N_Much · 08-20-2012, 09:01 PM

Quote:

TRIPLE CHARGED MY ACCOUNT! Three charges for $190, not to happy about that

Man I'm sorry to here that. I would loose my mind

. I hope you get your money back. I was curious about there halo's, man that sucks..

Vichtz · 08-20-2012, 11:10 PM

Ugh that sucks. I had that happen to me but I was reimbursed so you should be just fine. I've been all over trying to find an oven big enough to fit my headlights haha, but its really a challenge. As soon as I find one, I'll film and put up a DIY video on opening these bad boys. Ive done boiling before too to open headlights so I might try that, but finding a pot big enough is a serious challenge too (and I have a huge one for shrimp boils

) At any rate, I will video the entire process once I get the chance to do it. Maybe I'll try the cardboard box idea hahaha but gotta find a heat gun...

ericzmyers · 08-20-2012, 11:17 PM

Quote:

Originally Posted by Vichtz

Ugh that sucks. I had that happen to me but I was reimbursed so you should be just fine. I've been all over trying to find an oven big enough to fit my headlights haha, but its really a challenge. As soon as I find one, I'll film and put up a DIY video on opening these bad boys. Ive done boiling before too to open headlights so I might try that, but finding a pot big enough is a serious challenge too (and I have a huge one for shrimp boils

) At any rate, I will video the entire process once I get the chance to do it. Maybe I'll try the cardboard box idea hahaha but gotta find a heat gun...

Check out Nut_N_Much thread, he built a sweet *** oven out of a cardboard box and a heat gun.

Vichtz · 08-20-2012, 11:21 PM

yea thats what I was talkin about at the end there, but I have no heat gun. How much do they run, I always have a need for more tools, so I might as well get one

ericzmyers · 08-20-2012, 11:32 PM

Quote:

Originally Posted by Vichtz

yea thats what I was talkin about at the end there, but I have no heat gun. How much do they run, I always have a need for more tools, so I might as well get one

harbor freight is my friend! you can get a decent one for about $40

08-18-2012, 03:28 PM	#17 (permalink)
ericzmyers Base Member Join Date: Feb 2012 Location: port hueneme ca Posts: 70 Drives: 2011 Silver 370Z Rep Power: 13	So I've been out of the loop for a min. i did however complete a total sound deadening project. GTMAT.com is the ***! I ordered the light mod (370 Specific) and a (backlight) amber switch from AAC.com. Initial impression of this company is NOT so good. upon completion of my order i received a email from a company rep. they stated they needed: 1. Credit card authorization form 2. a scanned copy of my ID 3. a scanned copy of my card I said- i will NOT send you any of that, you can process my order or i will shop else where. I still need to contact the company and make sure they are aware of the email. After all that he company double charged me. i have two pending charges for $199 Parts are scheduled to be delivered on thursday and i will start the mod on saturday. Mod plan 1. get at the lights (drop the front facia) 2. pull the lights. 3. open the lights 4. separate the components 5. black out the housings 6. paint the lens housings red - gonna also pull the engine bar and paint that red (ZR1 hose kit, Red coming soon and red effects LEDs) Ill post pics and thoughts as i do it. __________________ Eric Z. Myers 2011 370Z, Silver, Sport, K&N short ram intake, Fast Intentions Exhaust, Pioneer AVIC, ORACLE Lighting LED Halo Kit, Tinted. Last edited by ericzmyers; 08-18-2012 at 03:31 PM.*

08-19-2012, 02:23 AM	#18 (permalink)
Vichtz Track Member Join Date: May 2012 Location: Unknown Posts: 538 Drives: PG 09 Nissan 370z Rep Power: 14	I just bought the LED halo kit from the link posted on the opening page. No issues and package got here in a timely manner. Although, i did have a question. It lists several things like balasts and the like, but all that came were the 2 rings. Thats it. The package it came in said the shipping weight was only one pound and indeed the package was just a single pound. Still seemed kind of odd. __________________ очень быстро ... Stillen Gen 3 CAI// Stillen CBE// B&M SS with PWJDM Shift Knob// Custom OCC// Drilled/Slotted Rotors//Halo/painted Headlights// Under-hood dress up

08-19-2012, 10:16 PM	#23 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	LightWurkz charged me $140.00 for the set and $25.00 more for the smaller second set. They came wired up to a control box that pluged into a ground and 12v source. There rings are 1/4 thick, yours looks thinner and would sit deeper into the shroud for a clean look. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

08-19-2012, 11:39 PM	#24 (permalink)
Vichtz Track Member Join Date: May 2012 Location: Unknown Posts: 538 Drives: PG 09 Nissan 370z Rep Power: 14	yea they seem well made, but i figured there would be more to it __________________ очень быстро ... Stillen Gen 3 CAI// Stillen CBE// B&M SS with PWJDM Shift Knob// Custom OCC// Drilled/Slotted Rotors//Halo/painted Headlights// Under-hood dress up

08-20-2012, 06:44 PM	#25 (permalink)
ericzmyers Base Member Join Date: Feb 2012 Location: port hueneme ca Posts: 70 Drives: 2011 Silver 370Z Rep Power: 13	hmmmm, we shall see. Mine are on track for thursday delivery. AND NOW THE COMPANY HAS TRIPLE CHARGED MY ACCOUNT! Three charges for $190, not to happy about that. i will begin the install on saturday morning. Gonna read back through Nut_N_Much thread and get the product list from his stuff. On the fence about the shroud paint....... __________________ Eric Z. Myers 2011 370Z, Silver, Sport, K&N short ram intake, Fast Intentions Exhaust, Pioneer AVIC, ORACLE Lighting LED Halo Kit, Tinted.

08-19-2012, 02:07 PM	#21 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	sub'd

08-20-2012, 11:10 PM	#27 (permalink)
Vichtz Track Member Join Date: May 2012 Location: Unknown Posts: 538 Drives: PG 09 Nissan 370z Rep Power: 14	Ugh that sucks. I had that happen to me but I was reimbursed so you should be just fine. I've been all over trying to find an oven big enough to fit my headlights haha, but its really a challenge. As soon as I find one, I'll film and put up a DIY video on opening these bad boys. Ive done boiling before too to open headlights so I might try that, but finding a pot big enough is a serious challenge too (and I have a huge one for shrimp boils ) At any rate, I will video the entire process once I get the chance to do it. Maybe I'll try the cardboard box idea hahaha but gotta find a heat gun... __________________ очень быстро ... Stillen Gen 3 CAI// Stillen CBE// B&M SS with PWJDM Shift Knob// Custom OCC// Drilled/Slotted Rotors//Halo/painted Headlights// Under-hood dress up

08-20-2012, 11:21 PM	#29 (permalink)
Vichtz Track Member Join Date: May 2012 Location: Unknown Posts: 538 Drives: PG 09 Nissan 370z Rep Power: 14	yea thats what I was talkin about at the end there, but I have no heat gun. How much do they run, I always have a need for more tools, so I might as well get one __________________ очень быстро ... Stillen Gen 3 CAI// Stillen CBE// B&M SS with PWJDM Shift Knob// Custom OCC// Drilled/Slotted Rotors//Halo/painted Headlights// Under-hood dress up

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Red zed car thoughts	Red__Zed	Other Vehicles	105	07-29-2012 10:16 AM
Thoughts on why no DCT for the Z....	Doug&Michelle	Nissan 370Z General Discussions	48	02-18-2012 02:32 PM
Oil cooler thoughts	Red__Zed	Engine & Drivetrain	60	04-16-2011 02:42 PM
thoughts/opinions	chii370	Exterior & Interior	3	01-09-2011 10:16 AM
Thoughts on 09 WRX?	blinkme323	Other Vehicles	14	08-27-2009 03:43 PM