New Shift Knob... let's try this again!

m4a1mustang · 06-15-2009, 06:34 PM

Many of you guys will remember my previous thread about my temporary shift-knob hackjob. If you don't remember, here's the thread: Aftermarket shift knob with short throw shifter and factory boot

Well, I ended up ditching the zinc spacer because it just started to feel weird (and I think I'm allergic to zinc) and went back to a small grommet to keep the boot off of the knob.

I ended up ordering a shifter ring thanks to AK and it came in today. I put it on and took some pics. Very pleased with the result. Just trying to decide if I should spray it with clear to better match the knob or just leave it as-is. Any thoughts?

theDreamer · 06-15-2009, 06:55 PM

Looks much better, how does the shifter feel size wise? A lot smaller than stock or just a bit smaller? I got a really small knob and found out that it was to small, if you could PM me the parts you ordered, shift knob and spacer I might try them out myself.

rreign · 06-15-2009, 07:37 PM

I like that set up a lot better than the last one you had. I'd clear it though.

m4a1mustang · 06-15-2009, 07:53 PM

Quote:

Originally Posted by theDreamer

Looks much better, how does the shifter feel size wise? A lot smaller than stock or just a bit smaller? I got a really small knob and found out that it was to small, if you could PM me the parts you ordered, shift knob and spacer I might try them out myself.

PM sent.

The knob is a little bit smaller than stock... 2" diameter. It feels pretty good, though. The only thing I'd change about it is weight. It'd be nice if it were twice as heavy.

m4a1mustang · 06-15-2009, 07:54 PM

Quote:

Originally Posted by rreign

I like that set up a lot better than the last one you had. I'd clear it though.

Yeah, I think that's what I'm going to do.

Skorch · 06-16-2009, 03:15 AM

Looks great! If you don't mind, could you point me to where you got that shifter ring?

initialgemini · 06-16-2009, 03:22 AM

Looks really good. If you could point me in the direction of where to purchase the hardware i'd be really grateful!

AK370Z · 06-16-2009, 03:49 AM

Now that looks a lot professional than the HomeDepot ring

. I'm glad you like it. Clear coat it, Steve! Finally, AK approved.

In my 350Z, I got the brushed aluminum (NOT pearl like the OP) and it matches pretty well with the ring(not 100% but see pic brushed knob with polished ring). If you're not set on pearl, and want to use the ring, I suggest brushed aluminum or polished.

m4a1mustang · 06-16-2009, 07:16 AM

I think I will hit it with clear this weekend. Going to see if I can find a pearl coat at my local hobby shop to better match the knob.

CBRich · 06-16-2009, 08:04 AM

Much improved. It's sad that it is so difficult to mate an aftermarket knob to the shaft and boot in an attractive manner.

racerxj17 · 06-16-2009, 09:54 AM

please post where you got the ring from!

gatorfast · 06-16-2009, 11:19 AM

How is the ring attached to the boot? Or is it not...

Modshack · 06-16-2009, 01:58 PM

Quote:

Originally Posted by CBRich

Much improved. It's sad that it is so difficult to mate an aftermarket knob to the shaft and boot in an attractive manner.

It's not hard at all...Just get rid of that cheezy plastic shift boot...

m4a1mustang · 06-16-2009, 09:39 PM

Quote:

Originally Posted by gatorfast

How is the ring attached to the boot? Or is it not...

It isn't attached to the boot. It just slips in between the boot and the knob.

OWSIU · 06-17-2009, 12:52 AM

Looks so much better with that finisher.

Not sure if there is where the OP got his, but others can pick one up from:
Zeetoyz Inc. - Nissan 350Z, Ring Kits, Engines, Cold Air Intake

06-15-2009, 06:55 PM	#2 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Looks much better, how does the shifter feel size wise? A lot smaller than stock or just a bit smaller? I got a really small knob and found out that it was to small, if you could PM me the parts you ordered, shift knob and spacer I might try them out myself. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

06-16-2009, 03:15 AM	#6 (permalink)
Skorch Enthusiast Member Join Date: Feb 2009 Location: Phoenix, AZ Posts: 469 Drives: 2012 370Z Rep Power: 540	Looks great! If you don't mind, could you point me to where you got that shifter ring? __________________ '12 370Z + Sport \| Stillen Gen3 Intakes \| Stillen UD Pulley \| Motordyne M370 \| FI Exhaust \| FI HFCs \| 4.08 Gears \| Uprev tuned

06-16-2009, 07:16 AM	#9 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	I think I will hit it with clear this weekend. Going to see if I can find a pearl coat at my local hobby shop to better match the knob. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Install Shift Knob	Minicobra1	Nissan 370Z General Discussions	43	12-23-2009 07:31 AM
WTB OEM Shift Knob	bcarrollg35	Wanted	21	07-07-2009 03:48 AM
Shift knob experimentation!....>>	Modshack	Exterior & Interior	8	05-16-2009 02:08 AM
wtb oem 370z shift knob	bcarrollg35	Nissan 370Z General Discussions	8	05-09-2009 02:27 AM
S2K Aluminum shift knob to replace OEM knob	initialgemini	Exterior & Interior	12	04-19-2009 03:56 PM

06-15-2009, 07:37 PM	#3 (permalink)
rreign A True Z Fanatic Join Date: Apr 2009 Location: South Carolina Age: 41 Posts: 2,341 Drives: 03 Evo 8 Rep Power: 709	I like that set up a lot better than the last one you had. I'd clear it though.

06-16-2009, 03:22 AM	#7 (permalink)
initialgemini Enthusiast Member Join Date: Mar 2009 Location: Irvine, CA Posts: 340 Drives: 2011 FX 35 Rep Power: 250	Looks really good. If you could point me in the direction of where to purchase the hardware i'd be really grateful!

06-16-2009, 08:04 AM	#10 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	Much improved. It's sad that it is so difficult to mate an aftermarket knob to the shaft and boot in an attractive manner.

06-16-2009, 09:54 AM	#11 (permalink)
racerxj17 Track Member Join Date: Apr 2009 Location: Socal Posts: 555 Drives: 09 370z Rep Power: 17	please post where you got the ring from!

06-16-2009, 11:19 AM	#12 (permalink)
gatorfast Base Member Join Date: Jan 2009 Location: SoFla Posts: 120 Drives: Z4 M Coupe Rep Power: 289	How is the ring attached to the boot? Or is it not...

06-17-2009, 12:52 AM	#15 (permalink)
OWSIU Base Member Join Date: Apr 2009 Location: California Posts: 40 Drives: 06 Infiniti G35 Rep Power: 16	Looks so much better with that finisher. Not sure if there is where the OP got his, but others can pick one up from: Zeetoyz Inc. - Nissan 350Z, Ring Kits, Engines, Cold Air Intake