Carbon Fiber Fenders
 

Well like I said I want to bring options to you guys where you guys chose what gets produced first.

So plain and simple who would be interested in carbon fiber fenders?

We would make them in two options.

Carbon fiber reinforced with fiberglass which would be around $699.99

or

Full carbon fiber which would be around $899.99

They both would be lighter than OEM fenders, but full carbon would be lighter than fiberglass reinforced, and much stronger.

Vents are also in the cards. All we need is to reproduce the OEM ones to create vented ones.

Maybe similar to these for the 350. But made to compliment the lines of the 370z

http://i82.photobucket.com/albums/j2...ibon350Zad.jpg
DONT PAY ATTENTION TO THE LETTERING ON THE IMAGE. I HAVE TO FIND A BETTER PICTURE...

Shipping would be roughly $60 anywhere in the US (accept alaska and hawaii)

If we can get 3 - 5 interested buyers then Id be glad to start.

1.
2.
3.
4.
5.

1. bullitt5897 *possibly add vent like amuse or mastergrade*
2.
3.
4.
5.

^ I might just do that :P

Man you jou just want everything! :P

Would possibly be interested, especially if they were a bit wider than stock and/or offered some venting above or behind the tire. Otherwise it would have to be a substantial weight loss for me to want to buy them anytime soon.

I would be interested also.

Would this be clear coated, no prep needed, ready to install, or matte finish, needs to be painted?

Clear coated ready to install!

1. bullitt5897 *possibly add vent like amuse or mastergrade*
2. DDmotorsports (with venting)
3. Shadspimp
4.
5.

Hi John,

Definitely interested, as long as those prices are MSRP-like, meaning that they will sell for 10-15% less than that.

For reference, Seibon carbon fenders for the 350Z can be found for $750 or so, and that's with being 10 mm wider than stock, and with exhaust vents behind the front tires. As far as I know, those are clear-coated and full carbon.

I'd be interested :)

How about a front bumper?

That's a pretty interesting idea. A custom bumper would allow for all kinds of air openings for radiators up front, openings for brake cooling ducts, and a different look!

Albeit, I think it would be very hard to save on weight, given the lightness of the stock bumper.

+1 for wider and vented

yup. Openings for coolers, built in openings for intake ducts and an extended lower lip splitter....

YES I DO!!! as a matter a fact I am clearing my schedule to drop the car off with you in the next coming weeks. I can leave it with you for a whole week to do the molds :happydance:

on a side note can you replicate that hood design on the seibon 350?

Sounds like the perfect opt to do a CF front bumper with a Mine's lip incorporated minus the Canards!

V1:No added vents
V2: With added vents for intakes!!

^ I leave for the morning to work at the shop and I come back to all the love! I tell you guys.. The amount of interest thats pouring into CF products is so high Im giong to have to higher a nascar pit crew to help me build all these molds and products :P

Ill be organizing, researching, and working on preparing for the wider and vented fenders as well as several other modifications I will be doing if we get the Z from bullitt for a week.

Ill PM you this evening bullitt.