Under the emblems

cwj370 · 06-15-2009, 03:23 PM

Last ones.

nogoodname · 06-15-2009, 03:23 PM

looks good !! but i'd remove the Z completely

the black paint on the Z's have lots of sparkles.....lol..the G has nothing...just black

the befores, you can see the word Nissan b/c it's black on chrome.....would it be a radical idea if you did it inverted, blacked out emblem with white paint to spell out Nissan...??

cwj370 · 06-15-2009, 03:24 PM

Oh, I just noticed that in the before shots there is one with one headlight tinted and one not. Which do you like best?

nogoodname · 06-15-2009, 03:30 PM

it's hard to tell, i missed it until you said it.

needs a darker tint, with projector cut outs

cwj370 · 06-15-2009, 03:52 PM

350Z Front Emblem - "Z" logo Black Pearl :: CourtesyParts
This is the one that I wanted, was just waiting on it to be done with the 370's Z
in place of the 350's. After seeing whats under the badges, I don't think it will work.

cwj370 · 06-15-2009, 03:54 PM

I'll probably have to go with one like this, just wish they would make it with the new Z.
http://www.courtesyparts.com/black-p...714_9085_9087&

nogoodname · 06-15-2009, 04:09 PM

the 1st link is nice, but like you said...it probably wont work out well....the 2nd link, not digging it..lol

i'd keep the ones you have and remove the letter Z on the rear.......it would be interesting to see blacked out emblems like urs with the word Nissan in white or silver.

tbonesteak · 07-24-2009, 01:22 AM

Sorry to bring this back from the dead but i have One question. Seems like the emblem is extremely hard to remove since the bumper caves in on the edges of the emblem. Where did you pry first on the emblem? what did you use and how did you do it? I wanna try this but it seems like even if you use fishing lines you will scratch paint because the part that you're prying is lower than the rest of the bumper (lower as in caved in), scratching the paint. Can you provide some info on this? Thanks man i appreciate your help.

cwj370 · 07-25-2009, 10:05 AM

Quote:

Originally Posted by tbonesteak

Sorry to bring this back from the dead but i have One question. Seems like the emblem is extremely hard to remove since the bumper caves in on the edges of the emblem. Where did you pry first on the emblem? what did you use and how did you do it? I wanna try this but it seems like even if you use fishing lines you will scratch paint because the part that you're prying is lower than the rest of the bumper (lower as in caved in), scratching the paint. Can you provide some info on this? Thanks man i appreciate your help.

I just started with the fishing line on one side. Just get it under the edge and hold the line up, not out, up and away from the car. Then just start with a sawing motion keeping the line up and away from the car the whole time. It also helps if it is heated up, we live in Tn. so I just would let mine sit out in the hot sun for a while. But you could use a blow dryer, just don't burn the paint. The other day one of my coworkers wanted me to help her remove some emblems from her truck, when we when out to do it, the truck was so hot you could have fried an egg on it. I ran the line under the emblem an it sliced right through the glue like it was butter! Easiest way to do it!

tbonesteak · 07-25-2009, 11:37 AM

Awesome. Thanks dude.

FricFrac · 07-25-2009, 12:36 PM

I think you'll damage the plastic with heat before the paint is affected..... a hair dryer is pretty safe - just touch it every now and then to see what the temp is at. If you get a blister its too hot

06-15-2009, 03:23 PM	#32 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1764	looks good !! but i'd remove the Z completely the black paint on the Z's have lots of sparkles.....lol..the G has nothing...just black the befores, you can see the word Nissan b/c it's black on chrome.....would it be a radical idea if you did it inverted, blacked out emblem with white paint to spell out Nissan...?? Last edited by nogoodname; 06-15-2009 at 03:30 PM.

07-25-2009, 12:36 PM	#41 (permalink)
FricFrac A True Z Fanatic Join Date: Dec 2008 Location: Victoria, BC Posts: 1,481 Drives: 370Z 300ZX 280ZX 240 Rep Power: 228	I think you'll damage the plastic with heat before the paint is affected..... a hair dryer is pretty safe - just touch it every now and then to see what the temp is at. If you get a blister its too hot __________________ '09 370Z - '93 300ZX Vert - '83 280ZX - '83 280ZXT -'81 280ZXT stroker - '72 240Z - Stillen CBE, HFC, G3, Grounding Kit, Sways // Swift Spring // H&R 15mm // 5% Tint // Clear Bra //

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z Factory "Fairlady Z" Emblems in stock, At the 350ZSOURCE!!!	Michael@TheZStore	Exterior & Interior	13	08-01-2009 12:59 PM
opinions on painting emblems and decals	takimbe	Exterior & Interior	6	05-08-2009 05:53 PM
Size of Front & Rear Emblems	mspeasl	Exterior & Interior	14	02-27-2009 06:22 PM

06-15-2009, 03:24 PM	#33 (permalink)
cwj370 Base Member Join Date: Apr 2009 Location: Tennessee Posts: 121 Drives: 09 370z Bl Tour Auto Rep Power: 16	Oh, I just noticed that in the before shots there is one with one headlight tinted and one not. Which do you like best?

06-15-2009, 03:30 PM	#34 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1764	it's hard to tell, i missed it until you said it. needs a darker tint, with projector cut outs

06-15-2009, 03:52 PM	#35 (permalink)
cwj370 Base Member Join Date: Apr 2009 Location: Tennessee Posts: 121 Drives: 09 370z Bl Tour Auto Rep Power: 16	350Z Front Emblem - "Z" logo Black Pearl :: CourtesyParts This is the one that I wanted, was just waiting on it to be done with the 370's Z in place of the 350's. After seeing whats under the badges, I don't think it will work.

06-15-2009, 03:54 PM	#36 (permalink)
cwj370 Base Member Join Date: Apr 2009 Location: Tennessee Posts: 121 Drives: 09 370z Bl Tour Auto Rep Power: 16	I'll probably have to go with one like this, just wish they would make it with the new Z. http://www.courtesyparts.com/black-p...714_9085_9087&

06-15-2009, 04:09 PM	#37 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1764	the 1st link is nice, but like you said...it probably wont work out well....the 2nd link, not digging it..lol i'd keep the ones you have and remove the letter Z on the rear.......it would be interesting to see blacked out emblems like urs with the word Nissan in white or silver.

07-24-2009, 01:22 AM	#38 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 375	Sorry to bring this back from the dead but i have One question. Seems like the emblem is extremely hard to remove since the bumper caves in on the edges of the emblem. Where did you pry first on the emblem? what did you use and how did you do it? I wanna try this but it seems like even if you use fishing lines you will scratch paint because the part that you're prying is lower than the rest of the bumper (lower as in caved in), scratching the paint. Can you provide some info on this? Thanks man i appreciate your help.

07-25-2009, 11:37 AM	#40 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 375	Awesome. Thanks dude.