My turn w/ the Short Shifter install, here is the knob I used!

kevr6 · 06-14-2009, 11:50 AM

First thanks to MiniCobra1 for the info on TWM weighted shifters!
Thanks to Josh@STILLEN for the deal on the B&M S.Shifter!
Thanks to TheHack for the DIY write up for the shifter replacement!
Interior pretty easy to disassemble!

Nice having access to a lift!

Filed down corner for Reverse!

Installation completed!

Here is a photo to show engraving!

I made a boot tie down from a faucet spacer and zip ties. This allowed me to shorten the boot slightly & allowed for lowest knob location on the shaft.
Here is the boot stretched in reverse.

My goal was an OEM look! The short shifter shifts just like an R8 (which is gated) but shorter throws. Very happy with both products!!
The shift knob is TWMPerformance Type R satin finish engraved (currently on sale).
Thanks

CBRich · 06-14-2009, 03:06 PM

Thanks for the pics. The filing of the corner is just the pic I was waiting to see.

sensi09 · 06-14-2009, 04:20 PM

That's a nice knob....quite heavy and looks good.

Just FYI, for a cheaper alternative, the greddy counter-weighted knob has good weight and decently priced.

theDreamer · 06-14-2009, 04:25 PM

The filing was the only part that sucked, but once that is done it is pretty easy. My only thing I have left to do with mine is I did not re-use the spring and aluminum bracket from the stock unit and after a few weeks without it I want it back.

kevr6 · 06-14-2009, 07:09 PM

Quote:

Originally Posted by theDreamer

The filing was the only part that sucked, but once that is done it is pretty easy. My only thing I have left to do with mine is I did not re-use the spring and aluminum bracket from the stock unit and after a few weeks without it I want it back.

I reused the spring but stretched it slightly for more force! The weighted shift knob feels like it helps with the vibration in the shifter also!

austex · 12-09-2009, 04:39 PM

how did you fasten the boot down with this new knob. I'm looking at the same one and wanted to see if your boot is secure... and how you did it. Zip ties?
thanks

kevr6 · 12-09-2009, 05:15 PM

Quote:

Originally Posted by austex

how did you fasten the boot down with this new knob. I'm looking at the same one and wanted to see if your boot is secure... and how you did it. Zip ties?
thanks

EXACTLY! I took three zip ties and made a fastener just like the stock fastener with the boot ends pulled through and tightened it down to the smaller shaft diameter. Took a little patience but simple and cheap.

Modshack · 12-09-2009, 05:19 PM

Quote:

Originally Posted by austex

how did you fasten the boot down with this new knob. I'm looking at the same one and wanted to see if your boot is secure... and how you did it. Zip ties?
thanks

I used a rubber bushing about the same diameter as the shaft. Also a Redline (real) leather boot with the smaller hole made it all come together:

kevr6 · 12-09-2009, 05:42 PM

Quote:

Originally Posted by Modshack

I used a rubber bushing about the same diameter as the shaft. Also a Redline (real) leather boot with the smaller hole made it all come together:

Yep, Same idea here with a plumbers faucet spacer along with the zip ties!

I plan on doing something different with my interior so held off on the after market boot.

G35guy84 · 12-09-2009, 06:59 PM

I've looked and looked, but I can't find an aftermarket shift knob for the 7AT. Do any of you know where I could find one?

spearfish25 · 12-09-2009, 09:45 PM

Quote:

Originally Posted by Modshack

I used a rubber bushing about the same diameter as the shaft. Also a Redline (real) leather boot with the smaller hole made it all come together:

Why the blue?

kevr6 · 12-09-2009, 10:33 PM

Quote:

Originally Posted by spearfish25

Why the blue?

I'm guessing to match his exterior.

JB1 · 12-09-2009, 10:44 PM

Quote:

Originally Posted by spearfish25

Why the blue?

To match his blue Sparco seats

Ryan@MRWorks · 12-10-2009, 01:13 AM

Sweet nice short and stuby shifter. Just the way I like it. How's the grip during shifting? I too have a metal shift knob in my shifter and when it's hot that thing burns the heck out of my hand so have to wait a few minutes before I drive off. Hope you have a sunshade.

kevr6 · 12-10-2009, 11:28 AM

Quote:

Originally Posted by Ryan@MRWorks

Sweet nice short and stuby shifter. Just the way I like it. How's the grip during shifting? I too have a metal shift knob in my shifter and when it's hot that thing burns the heck out of my hand so have to wait a few minutes before I drive off. Hope you have a sunshade.

I learned also to use a sunshade. Before I had a sunshade I put a small sock on it. Now I'm dealing with the cold metal with the few cold days we get here in Atlanta. (no big deal though)
The Satin finish feels nice!!

06-14-2009, 11:50 AM	#1 (permalink)
kevr6 A True Z Fanatic Join Date: Feb 2009 Location: N.W. Atlanta Posts: 1,515 Drives: '09 Graphite 370Z 6M Rep Power: 666	My turn w/ the Short Shifter install, here is the knob I used! First thanks to MiniCobra1 for the info on TWM weighted shifters! Thanks to Josh@STILLEN for the deal on the B&M S.Shifter! Thanks to TheHack for the DIY write up for the shifter replacement! Interior pretty easy to disassemble! Nice having access to a lift! Filed down corner for Reverse! Installation completed! Here is a photo to show engraving! I made a boot tie down from a faucet spacer and zip ties. This allowed me to shorten the boot slightly & allowed for lowest knob location on the shaft. Here is the boot stretched in reverse. My goal was an OEM look! The short shifter shifts just like an R8 (which is gated) but shorter throws. Very happy with both products!! The shift knob is TWMPerformance Type R satin finish engraved (currently on sale). Thanks __________________ *Beware...* Daily Sliding In My ZLED!

06-14-2009, 04:25 PM	#4 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	The filing was the only part that sucked, but once that is done it is pretty easy. My only thing I have left to do with mine is I did not re-use the spring and aluminum bracket from the stock unit and after a few weeks without it I want it back. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

12-09-2009, 06:59 PM	#10 (permalink)
G35guy84 Enthusiast Member Join Date: Aug 2009 Location: New York Posts: 305 Drives: '09 370Z 7AT Sprt PW Rep Power: 16	I've looked and looked, but I can't find an aftermarket shift knob for the 7AT. Do any of you know where I could find one? __________________ '09 Nissan 370Z Base 7AT - Sport Package - Pearl White \| Performance Mods: Stillen G3 CAI \| F.I. HFC \| F.I. TDX CBE w/ 18" resonators \| Megan Racing coilover kit \| Ichiba rear camber kit \| 20mm front / 25mm rear H&R spacers \| Aesthetic Mods: White interior/license plate LEDs \| 6000K bulbs \| 20% tint

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aftermarket shift knob with short throw shifter and factory boot	m4a1mustang	Exterior & Interior	18	06-09-2009 09:15 AM
short shifter	danielcast	Nissan 370Z General Discussions	6	06-03-2009 08:57 PM
B&M Short Shifter Group Buy	Josh@STILLEN	STILLEN	9	06-03-2009 11:02 AM
Short Shifter	Trolling222	Engine & Drivetrain	2	03-13-2009 06:00 PM
short throw shifter?	tvfreakazoid	Nissan 370Z General Discussions	6	03-09-2009 05:02 AM

06-14-2009, 03:06 PM	#2 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	Thanks for the pics. The filing of the corner is just the pic I was waiting to see.

06-14-2009, 04:20 PM	#3 (permalink)
sensi09 Enthusiast Member Join Date: Dec 2008 Location: so cal Posts: 449 Drives: _ Rep Power: 17	That's a nice knob....quite heavy and looks good. Just FYI, for a cheaper alternative, the greddy counter-weighted knob has good weight and decently priced.

12-09-2009, 04:39 PM	#6 (permalink)
austex Base Member Join Date: Jun 2009 Location: texas Posts: 126 Drives: 14 370z 6spd Rep Power: 16	how did you fasten the boot down with this new knob. I'm looking at the same one and wanted to see if your boot is secure... and how you did it. Zip ties? thanks

12-10-2009, 01:13 AM	#14 (permalink)
Ryan@MRWorks Base Member Join Date: Nov 2009 Location: San Diego Posts: 70 Drives: Widebody Celica GT-T Rep Power: 16	Sweet nice short and stuby shifter. Just the way I like it. How's the grip during shifting? I too have a metal shift knob in my shifter and when it's hot that thing burns the heck out of my hand so have to wait a few minutes before I drive off. Hope you have a sunshade.