Cubby Door

twinturbonet · 05-10-2012, 02:03 PM

So I've done a few searches and even looked at the DIY section, but maybe I'm just not searching well enough!

I'm trying to figure out how to remove the cubby door without destroying my interior. I didn't mind "experimenting" on my Z33, but I'm scared to even touch my Z34 Nismo. lol.

In the end, I want to put a tablet mount in the cubby to hold my tablet.

kenchan · 05-10-2012, 02:13 PM

i dont remember exactly, but i think you need to take that entire trim piece out inorder to undscrew the hinge on the back. check the stereo install DIY's on how to remove that piece. it's not difficult to do (ive done it like 5-6 times already).

nismo 1234 · 05-10-2012, 02:17 PM

DIY: Adding In-Cabin air filter to the 370Z

there is 7 screw you need to remove first. scroll down on the page, there is a better pic of all the screws u need to remove

kenchan · 05-10-2012, 02:23 PM

Quote:

Originally Posted by nismo 1234

DIY: Adding In-Cabin air filter to the 370Z

there is 7 screw you need to remove first. scroll down on the page, there is a better pic of all the screws u need to remove

that is the glove box... cubby is the one on the dash center above stereo...

nepali · 05-10-2012, 02:39 PM

OP, what a coincidence! I was researching this myself today. If I have time this weekend, I will be experimenting. I also want to install a tablet in the cubby hole. I was originally thinking iPad, but, that will look ridiculous! Maybe when/if the rumored 7-in iPad comes out!

kenchan · 05-10-2012, 02:40 PM

thedreamer has a nice setup with the oem nav bezel and all...

theDreamer · 05-10-2012, 02:51 PM

I am not 100% sure on how the upper cubby piece is removed as an audio shop handled my install. I would assume the outer dash piece (where the A/C vents are) will have to be taken off and then from that it is probably bolted or screwed in.

nismo 1234 · 05-10-2012, 02:54 PM

Quote:

Originally Posted by kenchan

that is the glove box... cubby is the one on the dash center above stereo...

ops lol stupid me

twinturbonet · 05-10-2012, 03:09 PM

Thanks all.

theDreamer · 05-10-2012, 03:12 PM

Here you go:

Wiggins3377 · 05-10-2012, 03:19 PM

Quote:

Originally Posted by theDreamer

Here you go:

wow, thats the nicest looking aftermarket job i've seen in that spot. Great idea using the OEM Nav bezel. How hard was that piece to find? What size screen are you using?

twinturbonet · 05-10-2012, 03:22 PM

Damn, thanks Dreamer. I had edited my post because I asked where your album was and realized it was part of your signature. Thank you for saving me the time of scrolling through your 50 pages of your journal thread lol.

You have a nice set up. I want a bigger screen

I don't mind covering the whole cubby hole itself with the tablet.

theDreamer · 05-10-2012, 03:23 PM

Quote:

Originally Posted by Wiggins3377

wow, thats the nicest looking aftermarket job i've seen in that spot. Great idea using the OEM Nav bezel. How hard was that piece to find? What size screen are you using?

Screen can be bought directly from Nissan, around 300 dollars I believe.
7" screen, same size as the OEM screen just requires some custom mounting to fit it since it is slightly different.

TreeSemdyZee · 05-10-2012, 04:11 PM

You have to pull the whole dash trim out to remove the whole lid. It connects in back. I've done it to replace a bad lid.

Wiggins3377 · 05-10-2012, 04:35 PM

Quote:

Originally Posted by theDreamer

Screen can be bought directly from Nissan, around 300 dollars I believe.
7" screen, same size as the OEM screen just requires some custom mounting to fit it since it is slightly different.

Do you know a part number for the navagation trip piece?

05-10-2012, 02:03 PM	#1 (permalink)
twinturbonet Enthusiast Member Join Date: Mar 2012 Location: Miami, FL Age: 42 Posts: 335 Drives: 11' Z #024 - SFZCC Rep Power: 13	Cubby Door So I've done a few searches and even looked at the DIY section, but maybe I'm just not searching well enough! I'm trying to figure out how to remove the cubby door without destroying my interior. I didn't mind "experimenting" on my Z33, but I'm scared to even touch my Z34 Nismo. lol. In the end, I want to put a tablet mount in the cubby to hold my tablet. __________________

05-10-2012, 02:39 PM	#5 (permalink)
nepali Track Member Join Date: Apr 2011 Location: Dallas, TX Posts: 597 Drives: like a maniac! Rep Power: 15	OP, what a coincidence! I was researching this myself today. If I have time this weekend, I will be experimenting. I also want to install a tablet in the cubby hole. I was originally thinking iPad, but, that will look ridiculous! Maybe when/if the rumored 7-in iPad comes out! __________________ '11 SR/6MT/T/S

05-10-2012, 02:51 PM	#7 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	I am not 100% sure on how the upper cubby piece is removed as an audio shop handled my install. I would assume the outer dash piece (where the A/C vents are) will have to be taken off and then from that it is probably bolted or screwed in. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

05-10-2012, 03:09 PM	#9 (permalink)
twinturbonet Enthusiast Member Join Date: Mar 2012 Location: Miami, FL Age: 42 Posts: 335 Drives: 11' Z #024 - SFZCC Rep Power: 13	Thanks all. __________________

05-10-2012, 03:12 PM	#10 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Here you go: __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

05-10-2012, 02:13 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i dont remember exactly, but i think you need to take that entire trim piece out inorder to undscrew the hinge on the back. check the stereo install DIY's on how to remove that piece. it's not difficult to do (ive done it like 5-6 times already).

05-10-2012, 02:17 PM	#3 (permalink)
nismo 1234 Track Member Join Date: May 2010 Location: Canada BC Posts: 501 Drives: 10 370z M6 40th Rep Power: 16	DIY: Adding In-Cabin air filter to the 370Z there is 7 screw you need to remove first. scroll down on the page, there is a better pic of all the screws u need to remove

05-10-2012, 02:40 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	thedreamer has a nice setup with the oem nav bezel and all...

05-10-2012, 03:22 PM	#12 (permalink)
twinturbonet Enthusiast Member Join Date: Mar 2012 Location: Miami, FL Age: 42 Posts: 335 Drives: 11' Z #024 - SFZCC Rep Power: 13	Damn, thanks Dreamer. I had edited my post because I asked where your album was and realized it was part of your signature. Thank you for saving me the time of scrolling through your 50 pages of your journal thread lol. You have a nice set up. I want a bigger screen I don't mind covering the whole cubby hole itself with the tablet. __________________

05-10-2012, 04:11 PM	#14 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,885 Drives: '09 370 & ‘14 Juke Rep Power: 27409	You have to pull the whole dash trim out to remove the whole lid. It connects in back. I've done it to replace a bad lid. Cam likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Door Panel Removal & Door Speaker Size	jikhead	DIY Section (Do-It-Yourself)	46	07-16-2016 11:04 PM
WTB: Cubby Door	js1	Wanted	2	05-13-2012 10:44 AM
WTB: Cubby door lid assembly.	370Z JT	Wanted	0	09-18-2011 01:38 PM
cubby	Scubasteve	Nissan 370Z General Discussions	12	03-05-2011 08:11 AM
What do you keep in your cubby?	jetguy	Nissan 370Z General Discussions	39	09-01-2010 03:14 PM