AutoTecknic Carbon Fiber Dual Air Ducts + Stillen Gen3?

2ndChance · 04-27-2012, 12:33 AM

I found these alternatives air ducts to the Mines which are utterly expensive...

Amazon.com: AutoTecknic Carbon Fiber Dual Air Ducts - Nissan 370Z 2010 - Up: Automotive

But was wondering if they would fit with the Gen3 installed? I dont have the intake yet so I'm not sure if they could hit the tubes or the filter..

XwChriswX · 04-27-2012, 12:36 AM

It would depend on the depth, maybe you could write the manufacturer to find out the dimensions?

But as for using with the G3's, I'm wondering why, since the inlet location will be way behind the filters? Doesn't seem like it will improve flow that much...

370Z JT · 04-27-2012, 01:24 AM

Going to need to cut the excess length to clear the piping.

TreeSemdyZee · 04-27-2012, 01:11 PM

Just a warning from personal experience. I had a duct on my 350. Hit flood waters, sucked into engine. Engine croaked. Plus a lot of other stuff.
That's why I have a 370.

SPOHN · 04-27-2012, 03:58 PM

Quote:

Originally Posted by 370Z JT

Going to need to cut the excess length to clear the piping.

I'm going to be buying these soon also. But I'm defiantly mounting mine further on the outside of the bumper instead of towards the center where the filters are. Reguardless trimming is going to have to take place.

2ndChance · 04-27-2012, 11:44 PM

I could make some foam molding to cover the vents when raining... Or cover them with waterproof material (As those used in intake shields, air goes thru but blocks water)

2ndChance · 09-24-2012, 05:30 PM

I've been driving under rainy conditions with these vents for several months and they held up well, no signs of water in the GEN 3 intakes, However I use a cutted foam piece to seal the vents when it rains very hard.

Here is a quick picture, I also had the shineauto CF bodykit installed, I hope to be able to post more pictures soon

RCZ · 09-24-2012, 05:49 PM

^ Gotta see that car next time I head down to Panama. I assume you know Jorge with the red one.

2ndChance · 09-24-2012, 07:02 PM

Quote:

Originally Posted by RCZ

^ Gotta see that car next time I head down to Panama. I assume you know Jorge with the red one.

Yeah... lets say the mods on my car is 90% DIY, thus not as clean as his

370Z JT · 09-24-2012, 09:37 PM

Hey what type of foam are you using? I need to make a cover for my ducts too.

synolimit · 07-21-2013, 08:58 PM

Quote:

Originally Posted by 2ndChance

I've been driving under rainy conditions with these vents for several months and they held up well, no signs of water in the GEN 3 intakes, However I use a cutted foam piece to seal the vents when it rains very hard.

Here is a quick picture, I also had the shineauto CF bodykit installed, I hope to be able to post more pictures soon

Old thread I know...how are these stuck on? Double sided tape?

TwiztedNismo · 07-21-2013, 09:28 PM

Wonder if these would fit on the bottom of the bumper to make brake ducts out of them? Are the fronts angled any?

2ndChance · 07-22-2013, 11:23 AM

Quote:

Originally Posted by TwiztedNismo

Wonder if these would fit on the bottom of the bumper to make brake ducts out of them? Are the fronts angled any?

They are specifically designed to go in the top... plus you cant attach any duct to it because the outlet is square shaped.

kenchan · 07-22-2013, 11:41 AM

dont those things just allow rain to go straight onto the intake filters?

like a dyson sucking water, im not sure if that's a good thing?

or do you add like a hydrophobic mesh or something on the back end?

COSMO · 07-22-2013, 05:54 PM

I guess amazon is no longer selling those because that link is dead... Any idea where to get those now??

04-27-2012, 12:33 AM	#1 (permalink)
2ndChance Base Member Join Date: Feb 2011 Location: Panama Posts: 240 Drives: like he stole it Rep Power: 199	AutoTecknic Carbon Fiber Dual Air Ducts + Stillen Gen3? I found these alternatives air ducts to the Mines which are utterly expensive... Amazon.com: AutoTecknic Carbon Fiber Dual Air Ducts - Nissan 370Z 2010 - Up: Automotive But was wondering if they would fit with the Gen3 installed? I dont have the intake yet so I'm not sure if they could hit the tubes or the filter..

04-27-2012, 12:36 AM	#2 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	It would depend on the depth, maybe you could write the manufacturer to find out the dimensions? But as for using with the G3's, I'm wondering why, since the inlet location will be way behind the filters? Doesn't seem like it will improve flow that much... __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

04-27-2012, 01:24 AM	#3 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	Going to need to cut the excess length to clear the piping. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

09-24-2012, 09:37 PM	#10 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	Hey what type of foam are you using? I need to make a cover for my ducts too. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon fiber steering wheel by Carbon Fiber Element - and other bits	SeeyaBud86	Exterior & Interior	9	03-22-2011 05:23 AM
FS: Seibon Carbon Fiber Front Lip and EVO-R carbon fiber Side Skirts	tabrams31	Parts for sale (Private Classifieds)	20	03-09-2011 05:54 PM
Stillen Gen3 Ultra long tube dual Intake Kit-still in box	boomboom	Parts for sale (Private Classifieds)	3	03-05-2011 10:36 PM
Stillen Gen III Intake and Fast Intentions CBE (18" Carbon Fiber)	grebnasticle	Parts for sale (Private Classifieds)	27	02-23-2011 09:46 AM
Titek Carbon Fiber Intake Ducts brand new $250 free ship'n	J. Dub	Parts for sale (Private Classifieds)	7	10-15-2010 10:29 AM

04-27-2012, 01:11 PM	#4 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,885 Drives: '09 370 & ‘14 Juke Rep Power: 27409	Just a warning from personal experience. I had a duct on my 350. Hit flood waters, sucked into engine. Engine croaked. Plus a lot of other stuff. That's why I have a 370.

04-27-2012, 11:44 PM	#6 (permalink)
2ndChance Base Member Join Date: Feb 2011 Location: Panama Posts: 240 Drives: like he stole it Rep Power: 199	I could make some foam molding to cover the vents when raining... Or cover them with waterproof material (As those used in intake shields, air goes thru but blocks water)

09-24-2012, 05:49 PM	#8 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	^ Gotta see that car next time I head down to Panama. I assume you know Jorge with the red one.

07-21-2013, 09:28 PM	#12 (permalink)
TwiztedNismo Base Member Join Date: Nov 2012 Location: Spring Lake, NC Posts: 80 Drives: 2013 Nissan 370z Rep Power: 13	Wonder if these would fit on the bottom of the bumper to make brake ducts out of them? Are the fronts angled any?

07-22-2013, 11:41 AM	#14 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	dont those things just allow rain to go straight onto the intake filters? like a dyson sucking water, im not sure if that's a good thing? or do you add like a hydrophobic mesh or something on the back end?

07-22-2013, 05:54 PM	#15 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	I guess amazon is no longer selling those because that link is dead... Any idea where to get those now??