Alarm beep stopped working?!

base64

Hey guys, I just installed the illuminated kickplate harness and now my alarm beep stopped working?? Any ideas what I did to break it? Meaning when I press lock/unlock on the keyfob there is no longer a beep sound.

I was thinking maybe when putting back on the LH side-panel I hit one of the fuses a little too rough and broke it. Is it possible that I disconnected something from the RH side BCM?

I followed the OEM instructions for the harness so I doubt I did any serious damage.

Thanks for any help or insight you may be able to provide.. I'm new to this type of thing!

__________________
Stillen Gen3 CAI, Invidia Gemini, TEIN Flex coilovers, slotted rotors, greddy DRL's, cf nose, carbon fiber wrapped kick plates with blue LEDs

Trips

Try this from page 3-16 of the Owners Manual

Switching procedure:

To switch the hazard indicator and horn (chime) operation, push the LOCK *1 and UN- LOCK *2 buttons on the Intelligent Key simultaneously for more than 2 seconds.
. When the hazard indicator mode is set, the hazard indicator flashes 3 times.
. When the hazard indicator and horn mode is set, the hazard indicator flashes once and the horn chirps once.



http://www.nissanusa.com/content/dam...issan-370Z.pdf

__________________

GaleForce

that should do it. I had to do this fix this weekend myself.

__________________

LakeShow

That should fix it for the key. But one time my beep from clicking the little button on the door stopped. For that I had to take it to the dealer, no way to reverse that.

__________________
|2013 Audi S4|Ibis White/Black|S-Tronic P+|
|2013 370z|PearlWhite/Persimmon|Touring/Sport/Nav|F.I. CBE 18" CF|
|Sold|2011 370z|Gun Metallic|Touring/Sport/Nav|

Compdoc777

Have you all unrolled the windows with the remote?

I was messing with the remote and got the windows to roll a little or all the way down.

base64

Muahaha that worked just fine. I should just memorize this manual. Thanks!

__________________
Stillen Gen3 CAI, Invidia Gemini, TEIN Flex coilovers, slotted rotors, greddy DRL's, cf nose, carbon fiber wrapped kick plates with blue LEDs

Alexwallace23

Well I switched my to only hazard mode a couple weeks ago and now I'm trying to change it back without any luck. I'm following the instructions in the manual and its not working. Is there a trick to getting it back to harzard and horn mode, or is there something broken?

DEpointfive0

Um... Take a video of you holding the lock and unlock button down at the same time

__________________
Do YOU want to know what/where I got my username from?

diddy535

Haven't heard of this one yet, how does it work?

__________________

scgolfer7

Yeah it does, I think you just press unlock twice, quickly, but on the second press hold unlock down for about 5 seconds and the windows will roll down. You can let off the unlock button to stop them at any point in the process, just can't go back up.

03g35coupe6mt

yes if you hold down the unlock button the windows roll down . you can also take the key out of the fob and put in the door and roll them down or turn the other way and they will go back up . sadly you cant roll the windows up with the remote

diddy535

That's pretty slick good to know!

__________________

Alexwallace23

DEpointfive0,

I got it to work. I don't know what I did differently this morning versus a couple hours ago. I am starting to think my car is alive based on this and another issue that I'm having with the car (I'm not ready to share what the other issue is).