All red tail light cover, reverse white delete

XwChriswX

You could try getting a candy red rattle can and see if that can gloss it over with a red like you want.

Step one, mask off the area you want with clear tape.

Step two, mask off the area of clear tape you want to cover.

Step three, spray the area you're looking to make red with a few coats till its the desired level of 'red'

Step four, decide if you like it or not. If you do, remove tape and repeat. But if you don't like it, just peel the tape off and goo gone the lens. No harm no foul.

__________________

Bonnie - Stage 2, Audio build coming this fall!
R.I.P. Abby 3/29/10 - 3/30/14

Alstann

What about that pepboys red film used for a quick-and-dirty lens repair job? I bet a few layers of that and an exactoknife would do the trick. I would be worried about a random drop of paint running somewhere I didn't want it to.

XwChriswX

As long as you mask everything off properly, and only spray what you need to. And it's not windy, you shouldn't have any problem whatsoever.

I'd rather have some paint that can come off vs using a blade to possibly cut into the lens.

__________________

Bonnie - Stage 2, Audio build coming this fall!
R.I.P. Abby 3/29/10 - 3/30/14