Vented hood thread

JWillis72 · 01-16-2015, 12:37 PM

I would bet that the front vents help pull heat but not so sure about the back ones. It's a good looking hood!

hjo1078 · 01-16-2015, 01:10 PM

Im adding three layers of clear coat to it before i clearbra. The clearcoat it came with is super thin. But fitment was very good. And yeah i didnt know it was vented on the back end.

Sent from my iPhone using Tapatalk

hjo1078 · 01-16-2015, 01:13 PM

Heres what it looks like from the bottom.

Another nice angle

Sent from my iPhone using Tapatalk

tturbo370z · 01-16-2015, 01:13 PM

Quote:

Originally Posted by Hotrodz

Bumping this bad boy because of this! The sad part of this is the hood has been at my brother's house for two weeks and I have not seen it in person yet

Nice hood hotrodz . I was debating between this and the varis and had I saw these pics prior I would have went with this over the varis. THe pics I saw online just didn't do it justice like these.

I'm glad u have it and it looks hella sweet. It will work well when we run our cars when u make it over to see me haha

TerribleONE · 01-16-2015, 01:14 PM

Looks sick man.

Hotrodz · 01-16-2015, 02:27 PM

Quote:

Originally Posted by theDreamer

Yeah, it comes down to high vs low pressure areas when trying to get heat out.
I don't think anyone has done enough extensive running with the Z to prove that a vent that far back would be bad, we all just summarize that the closes to the front/center area is most ideal for extracting heat.

Quote:

Originally Posted by JWillis72

I would bet that the front vents help pull heat but not so sure about the back ones. It's a good looking hood!

I know engineer, but it may be that it helps in drawing the hot air through the side vents and making them more effective.

Hotrodz · 01-16-2015, 02:32 PM

Quote:

Originally Posted by jwick

Your still sitting on that thing? Just send it to Houston, we'll just throw it on Chuck's ride and give you a decent write-up in return

Quote:

Originally Posted by TerribleONE

Better throw that thing on or I will just have to put it on my car...

Hotrodz · 01-16-2015, 02:37 PM

Thanks everyone for all the great comments...hjo1078 is another FI boosted brotha. I debated on getting the Fugi front bumper too, but I partial to keeping it Nismoish for now LOL!!!

JWillis72 · 01-16-2015, 02:58 PM

When you install it please let us know if you can see it affecting temps.

Sent from my iPhone using Tapatalk

Hotrodz · 01-16-2015, 04:03 PM

Will do....

valpozguy · 01-25-2015, 01:33 PM

So is this hood at factory height at the lower areas? And raised in the middle?

Hotrodz · 02-03-2015, 08:07 PM

Finally got my hood installed on Sunday....she is "BAD ***"

http://s26.postimg.org/ervejn86x/20150202_181156.jpg

http://s26.postimg.org/ak0maw6rd/20150201_180946.jpg

http://s26.postimg.org/g9guv7cxl/20150201_161737.jpg

http://s26.postimg.org/t24yv4ojd/20150202_181214.jpg

http://s26.postimg.org/sqs3w3xh5/20150202_181532.jpg

http://s26.postimg.org/oixbncw1l/20150202_181521.jpg

jwick · 02-03-2015, 08:21 PM

Notice any temp reductions?

Hotrodz · 02-03-2015, 08:49 PM

I bought this hood on impulse even it looked so sexy I had to have it. Here is my assessment of the hood:

First off, pictures do not do it any justice it look much better in person. According to my brother the hood was extremely well packed and took him about half an hour to unwrap. The installation was simple and straight forward. The fitment is spot on, no adjustment needed.

The hood is fully functional and reeks of quality. As you can see in the photos, you can not see daylight from the inside vents. The hood is scooped so the air flows into the vents and is funneled to the outside vents which are place vertically on the side of the hood which gives it a unique look. The vents have gutters to move water down the hood and drain in front of the engine bay.

I drove back home on Sunday night and the temperature was in the mid 50s. Let's just say the 3.5 to 4 hour trip went by quickly as I40 is lonely highway late at night on a Sunday. The hood performed flawlessly, there were no strange vibrations, no noticeable or weird flexing or unusual sounds. This included runs in the mid triple digits...oops!!!

When I got home I did the most used method for checking for heat coming through the vents...I waved my hand in front of the vents and hot air was being emitted from the side vent in a significant way. The vent near the windshield didn't seem to have as much heat coming from them but there was warm air non the less. It could simply be a function of the length of the vent and the opportunity for the air to cool by the time it reach that far back as well.

All in all I believe the hood is differently worth the money. Saving for a clear bra now!!!

Vrg37s · 02-03-2015, 09:10 PM

Hood looks great, so many options for the 370z

01-16-2015, 01:10 PM	#152 (permalink)
hjo1078 Track Member Join Date: May 2011 Location: virginia Age: 46 Posts: 572 Drives: twin turbo 370z Rep Power: 5395	Im adding three layers of clear coat to it before i clearbra. The clearcoat it came with is super thin. But fitment was very good. And yeah i didnt know it was vented on the back end. Sent from my iPhone using Tapatalk TerribleONE and Hotrodz like this.

01-16-2015, 01:13 PM	#153 (permalink)
hjo1078 Track Member Join Date: May 2011 Location: virginia Age: 46 Posts: 572 Drives: twin turbo 370z Rep Power: 5395	Heres what it looks like from the bottom. Another nice angle Sent from my iPhone using Tapatalk Hotrodz and cigarclifford like this.

01-16-2015, 01:14 PM	#155 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Looks sick man. hjo1078 and Hotrodz like this. __________________ 638WHP 541WTQ @ 13.5PSI Build thread

01-16-2015, 02:37 PM	#158 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Thanks everyone for all the great comments...hjo1078 is another FI boosted brotha. I debated on getting the Fugi front bumper too, but I partial to keeping it Nismoish for now LOL!!! TerribleONE and hjo1078 like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

01-16-2015, 04:03 PM	#160 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Will do.... __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

01-16-2015, 12:37 PM	#151 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I would bet that the front vents help pull heat but not so sure about the back ones. It's a good looking hood!

01-16-2015, 02:58 PM	#159 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	When you install it please let us know if you can see it affecting temps. Sent from my iPhone using Tapatalk

01-25-2015, 01:33 PM	#161 (permalink)
valpozguy Track Member Join Date: Feb 2012 Location: valparaiso Posts: 501 Drives: 09 z Rep Power: 16	So is this hood at factory height at the lower areas? And raised in the middle?

02-03-2015, 08:07 PM	#162 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Finally got my hood installed on Sunday....she is "BAD *" http://s26.postimg.org/ervejn86x/20150202_181156.jpg http://s26.postimg.org/ak0maw6rd/20150201_180946.jpg http://s26.postimg.org/g9guv7cxl/20150201_161737.jpg http://s26.postimg.org/t24yv4ojd/20150202_181214.jpg http://s26.postimg.org/sqs3w3xh5/20150202_181532.jpg http://s26.postimg.org/oixbncw1l/20150202_181521.jpg jwick, hjo1078, cycy89 and 4 others like this. __________________ Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX**\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

02-03-2015, 08:21 PM	#163 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Notice any temp reductions? __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

02-03-2015, 08:49 PM	#164 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	I bought this hood on impulse even it looked so sexy I had to have it. Here is my assessment of the hood: First off, pictures do not do it any justice it look much better in person. According to my brother the hood was extremely well packed and took him about half an hour to unwrap. The installation was simple and straight forward. The fitment is spot on, no adjustment needed. The hood is fully functional and reeks of quality. As you can see in the photos, you can not see daylight from the inside vents. The hood is scooped so the air flows into the vents and is funneled to the outside vents which are place vertically on the side of the hood which gives it a unique look. The vents have gutters to move water down the hood and drain in front of the engine bay. I drove back home on Sunday night and the temperature was in the mid 50s. Let's just say the 3.5 to 4 hour trip went by quickly as I40 is lonely highway late at night on a Sunday. The hood performed flawlessly, there were no strange vibrations, no noticeable or weird flexing or unusual sounds. This included runs in the mid triple digits...oops!!! When I got home I did the most used method for checking for heat coming through the vents...I waved my hand in front of the vents and hot air was being emitted from the side vent in a significant way. The vent near the windshield didn't seem to have as much heat coming from them but there was warm air non the less. It could simply be a function of the length of the vent and the opportunity for the air to cool by the time it reach that far back as well. All in all I believe the hood is differently worth the money. Saving for a clear bra now!!! GaleForce, tturbo370z and cooltoy like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

02-03-2015, 09:10 PM	#165 (permalink)
Vrg37s Base Member Join Date: Apr 2013 Location: CA Posts: 235 Drives: 08 G37 Rep Power: 12	Hood looks great, so many options for the 370z Hotrodz likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan 370z Raised Hood Kit / Hood Spacer Kit	Mak	Exterior & Interior	39	12-20-2020 11:24 AM
Custom vented hood	Zeto	Nissan 370Z General Discussions	77	11-11-2014 05:43 PM
SOCAL: SD - Carbon Fiber vented hood brand new	Marco_xyz	Parts for sale (Private Classifieds)	39	03-01-2011 09:06 PM
40th Ann. 370z w/carbon fibre vented hood, and Nismo Front Bumper	ocean.mirage	Member's 370Z Gallery	20	11-02-2010 10:53 AM