Vented hood thread

[Rusty]

He give you a rough price range?

[madwi]

Originally Posted by Hotrodz

Gonna jump on here and revive this thread as I am looking into options for a custom hood vent inserts. In doing so I found a vendor is southern California that specializes in hood inserts. I contacted Trackspec (Trackspecmotorsports.com) to see if any of their universal hood vents would work for the Z. John called me back and said he would rather design and build a custom hood vent for the Z especially if the was some interest. He contacted another forum brother and he agreed to donate his hood to the cause and will be dropping it of next week. I will start another thread if folks are interested. So what say you?

Please keep me informed as I was about to chop up an oem hood in the near future.

[Hotrodz]

Originally Posted by Rusty

He give you a rough price range?

He did not but I can't see it being any more expensive as what is priced on their website for other vents.

Originally Posted by madwi

Please keep me informed as I was about to chop up an oem hood in the near future.

Will do brother...I should know something soon!

[madwi]

Originally Posted by Hotrodz

He did not but I can't see it being any more expensive as what is priced on their website for other vents.



Will do brother...I should know something soon!

You the man! I appreciate it very much.

[OptionZero]

Originally Posted by Hotrodz

Gonna jump on here and revive this thread as I am looking into options for a custom hood vent inserts. In doing so I found a vendor is southern California that specializes in hood inserts. I contacted Trackspec (Trackspecmotorsports.com) to see if any of their universal hood vents would work for the Z. John called me back and said he would rather design and build a custom hood vent for the Z especially if the was some interest. He contacted another forum brother and he agreed to donate his hood to the cause and will be dropping it of next week. I will start another thread if folks are interested. So what say you?

Please encourage him to do something close to the Overtake GTR hood. Pretty much my perfect hood design

[Hotrodz]

Originally Posted by OptionZero

Please encourage him to do something close to the Overtake GTR hood. Pretty much my perfect hood design

The input I gave him was a center vent and side vents that would as much air as possible lol.

[Zthirty4NISMO]

Originally Posted by Hotrodz

Gonna jump on here and revive this thread as I am looking into options for a custom hood vent inserts. In doing so I found a vendor is southern California that specializes in hood inserts. I contacted Trackspec (Trackspecmotorsports.com) to see if any of their universal hood vents would work for the Z. John called me back and said he would rather design and build a custom hood vent for the Z especially if the was some interest. He contacted another forum brother and he agreed to donate his hood to the cause and will be dropping it of next week. I will start another thread if folks are interested. So what say you?

I am interested. Eventually want FI so the idea of getting a hood to properly vent all the heat intrigues me instead of getting one that is more for looks. Also using my OEM hood would be nice so I don't have two hoods one day..

[Hotrodz]

Originally Posted by Zthirty4NISMO

I am interested. Eventually want FI so the idea of getting a hood to properly vent all the heat intrigues me instead of getting one that is more for looks. Also using my OEM hood would be nice so I don't have two hoods one day..

I have an awesome aftermarket vented hood and it works most the time but on the track on high temp days 90 plus it is not enough to combat the heat generated by a twin turbo system and that is why I decided to look into another solution. Also, I have pretty good vision but no mechanical skills so diy is not on the table for me so this will benefit those like me as well lol!

[ChaseZ]

Originally Posted by Hotrodz

I have an awesome aftermarket vented hood and it works most the time but on the track on high temp days 90 plus it is not enough to combat the heat generated by a twin turbo system and that is why I decided to look into another solution. Also, I have pretty good vision but no mechanical skills so diy is not on the table for me so this will benefit those like me as well lol!

I've been seeing massive reductions in temp by opening up the grille, not just vents in the hood. Ambient AIT's and oil temps so low I though my gauge was broken. Just some food for thought.

[Hotrodz]

Originally Posted by ChaseZ

I've been seeing massive reductions in temp by opening up the grille, not just vents in the hood. Ambient AIT's and oil temps so low I though my gauge was broken. Just some food for thought.

Lol, I so what you did and I considering do the same thing. Oddly enough AIT temp are very acceptable with the ventilation I have only running a few degrees above ambient but my water and oil temps are way to high. I will hit you up in your thread.

Sent from my SM-N910P using Tapatalk

[370zHawaii]

Originally Posted by Hotrodz

I have an awesome aftermarket vented hood and it works most the time but on the track on high temp days 90 plus it is not enough to combat the heat generated by a twin turbo system and that is why I decided to look into another solution. Also, I have pretty good vision but no mechanical skills so diy is not on the table for me so this will benefit those like me as well lol!

Hey Hotrodz,

I have been looking for a CF hood and mostly interested in the Fujimura CF hood. I don't know where to find it, and I also plan on boosting in the future. My question is that you are saying that the hood does not ventilate as well as one would think? Also I checked vivids site and could not find any place to order it, but now I am kind of on the fence because ultimately I would much rather have functionality over appearance. The Fuji hood is the best looking IMHO, but if it heat may become an issue when boosted I may have to look at other hoods as the Fuji seems to cost nearly 2-3 times as some of the other options and does not equate to ventilation.. thanks greatly appreciate your feedback on it.

Also have you thought about adding more ventilation to the hood while keeping the appearance and improving on functionality? That might be something worth while..

Edit: Just saw that you were looking for custom inserts disregard previous message

[Hotrodz]

Originally Posted by 370zHawaii

Hey Hotrodz,

I have been looking for a CF hood and mostly interested in the Fujimura CF hood. I don't know where to find it, and I also plan on boosting in the future. My question is that you are saying that the hood does not ventilate as well as one would think? Also I checked vivids site and could not find any place to order it, but now I am kind of on the fence because ultimately I would much rather have functionality over appearance. The Fuji hood is the best looking IMHO, but if it heat may become an issue when boosted I may have to look at other hoods as the Fuji seems to cost nearly 2-3 times as some of the other options and does not equate to ventilation.. thanks greatly appreciate your feedback on it.

Also have you thought about adding more ventilation to the hood while keeping the appearance and improving on functionality? That might be something worth while..

Edit: Just saw that you were looking for custom inserts disregard previous message

The Fugi hood is awesome and sexy as hell. It is very functional and moves a lot of air. Like I said in another post I have only hit high temps on one occasion during a track day and the temp was over 90*. This really could have nothing to do with the hood but more to not getting more air in through the bumper. My temps were even fine on a 100* track event that was a night. So I am doing a number of things to combat high temps.

The great thing about the hood is you can run in the rain and water never touches your engine. The hood drains incredibly well. I would buy it again. The other reason I am looking for a solution is I don't want to screw Fugi up at the track. So far it has no noticeable chips or scratches on it. You can order the Fugi hood from RHDJapan. They have reasonable prices and the wait is about three months.

[carlitos_370z]

Originally Posted by Hotrodz

Gonna jump on here and revive this thread as I am looking into options for a custom hood vent inserts. In doing so I found a vendor is southern California that specializes in hood inserts. I contacted Trackspec (Trackspecmotorsports.com) to see if any of their universal hood vents would work for the Z. John called me back and said he would rather design and build a custom hood vent for the Z especially if the was some interest. He contacted another forum brother and he agreed to donate his hood to the cause and will be dropping it of next week. I will start another thread if folks are interested. So what say you?

Im interested bro! depending on the price and the style of the inserts of course

[CJBinder]

Love the hood!!!


Sent from my iPhone using Tapatalk

[ChaseZ]

Nice. Yeah, spin off a new thread for it. Interested in what he comes up with!