★★★ ► CarbonSignal Spec-ME Front Lip ◄ ★★★

anthonyy · 06-06-2012, 12:18 PM

Quote:

Originally Posted by tommyguns

Hey Guy's
What’s up. Like I mentioned, my body guy took a dump on my situation so I installed it myself. I did not use two sided tape, I went with a 3M product for just this type of job. I will get the name later. Pre fit the lip and secure it in place with some tape dont worry about the gap right now! Once you happy with the Pre fit, use a couple of self-tapping screws and secure it from underneath once your happy with the fit. My suggestion would be to do as I did, remove as many fasteners that hold the bumper from underneath as possible, that includes any that are holding the bumper to the wheel well. The idea is to get the bumper as flexible as possible. Take some blue tape and mark a few areas were the lip should be once it's installed. Now remove the lip and apply your choice of adhesive, re-install the lip and secure it from the bottom were you previously used the self-tapping screws then use duct tape to hold it in place. Now here’s how you fix the wheel well gap. Push the fender wheel well out of the way and take another self-tapping screw and screw the lip and the bumper together from the inside. If you look at the curved ends of the lip you will see the area I'm talking about. One side came out perfect and the other has a small gap that can be filled with some phenoseal. I'll take some pictures in a bit.

Thanks Tom, great information.

KaienZ34 · 06-06-2012, 12:24 PM

No aftermarket bodykit is perfect. Hell the original amuse kit from Power House Amuse needed a good bit of bodywork to make it fit and it was over 5k just for the kit.

tommyguns · 06-06-2012, 03:11 PM

Quote:

Originally Posted by KaienZ34

No aftermarket bodykit is perfect. Hell the original amuse kit from Power House Amuse needed a good bit of bodywork to make it fit and it was over 5k just for the kit.

Agreed! It's a good fit, it just needs a little tweak here and there. No big deal. As soon as I get a chance to clean it I will post up some shots.

Wiggins3377 · 06-06-2012, 03:28 PM

For those who've had their lip painted, about how much should I expect to spend?

anthonyy · 06-06-2012, 03:38 PM

I paid 200 w install

Sent from my SAMSUNG-SGH-I777 using Tapatalk 2

Wiggins3377 · 06-06-2012, 07:12 PM

Quote:

Originally Posted by anthonyy

I paid 200 w install

Sent from my SAMSUNG-SGH-I777 using Tapatalk 2

Awesome. Looking forward to pictures.

CarbonSignal · 06-07-2012, 02:41 AM

Hi guys,

amazing post tommy,

guys, i recieved couple of pm's regarding the fitment specially on the side of the bumper. so i got 3 lips from our workshop that went out from the exact same mold and did the test fit myself. and it did fit like a glove if you push the sides.

this kind of lip need to be installed carefully, thats why we dont recommend doubleside tape for the install.

- The bumper need to be removed.
- The lip need to be installed with the help of another person in order to get all the sides flush, its not a one person job

- We recommend using screws on the lower part and on the rear side parts to make sure the lip is holding properly and then in the middle use silicon for a flushy look.

we do test all our products before sending them. and we do have original 370z bumper and full interior kit in order to have happy customer, along the way some stuff happens but no biggy

. i am sure you guys can handle it.

let us know how it goes guys.. and we will always be there to support you.

B.R
Naj

GaleForce · 06-07-2012, 01:02 PM

Thanks for the tips Tommy and Carbon Signal. I will remove my front bumper and get it fitted. I'm sure it will work out.

Rep'd

Thanks

sinceday1 · 06-09-2012, 10:26 AM

Quote:

Originally Posted by GaleForce

Thanks for the tips Tommy and Carbon Signal. I will remove my front bumper and get it fitted. I'm sure it will work out.

Rep'd

Thanks

Yeah gale, It'll fit.
It was 2 person job for my lip as well but when all done, it sits flush. (as i mentioned in previous posts, around 2mm gap was still there, but I filled it in with clear silicone - makes it look black after it cures due to reflections)

As for the edges where the bumper meets the lip, I fired up my creativity a little. My car is white, so the change from white to CF was way too prominent. So I cut up a triangle shaped 'addon' from the factory sport lip (which happened fit perfect if you cut the left and right edges of the sports lip), and used epoxy glue to 'hide' the white-CF borders.

I will post some pics later today to show you guys what I mean. I wasn't gonna use my SP front lip anywhere anyways, I thought i'd make some use out of it.

KaienZ34 · 06-09-2012, 11:31 AM

Quote:

Originally Posted by sinceday1

Yeah gale, It'll fit.
It was 2 person job for my lip as well but when all done, it sits flush. (as i mentioned in previous posts, around 2mm gap was still there, but I filled it in with clear silicone - makes it look black after it cures due to reflections)

As for the edges where the bumper meets the lip, I fired up my creativity a little. My car is white, so the change from white to CF was way too prominent. So I cut up a triangle shaped 'addon' from the factory sport lip (which happened fit perfect if you cut the left and right edges of the sports lip), and used epoxy glue to 'hide' the white-CF borders.

I will post some pics later today to show you guys what I mean. I wasn't gonna use my SP front lip anywhere anyways, I thought i'd make some use out of it.

Cool idea, i still have my sport lip sitting. I have the carbon signal TS style carbon lip to put on my white Z. Not sure if i'll need to do something like this also, but a damn good idea.

anthonyy · 06-11-2012, 12:23 AM

The lip actually fits really well. There's just a small 2-3 mm gap on the drivers side about an inch in length.
We removed the bumper and drilled from the inside of the bumper so the screws would pull the lip in to make it fit.
Everything turned out awesome...
There was minor prep work needed, but all in all I am very satisfied.
Just like the real thing for a fraction of the price! (sorry jdm guys)

Sent from my SAMSUNG-SGH-I777 using Tapatalk 2

2ndChance · 06-11-2012, 12:39 AM

Great to hear!! any pics??

A.J@CarbonSignal · 06-11-2012, 01:05 AM

Quote:

Originally Posted by 2ndChance

Great to hear!! any pics??

anthonyy · 06-11-2012, 01:08 AM

Sent from my SAMSUNG-SGH-I777 using Tapatalk 2

sinceday1 · 06-11-2012, 06:51 AM

Just to give you guys an idea of how the SP spoiler was cut.

06-06-2012, 12:24 PM	#182 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	No aftermarket bodykit is perfect. Hell the original amuse kit from Power House Amuse needed a good bit of bodywork to make it fit and it was over 5k just for the kit. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

06-06-2012, 03:28 PM	#184 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 77	For those who've had their lip painted, about how much should I expect to spend? __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

06-07-2012, 02:41 AM	#187 (permalink)
CarbonSignal A True Z Fanatic Join Date: Jan 2011 Location: Dubai/California Posts: 2,092 Drives: 370z Rep Power: 20	Hi guys, amazing post tommy, guys, i recieved couple of pm's regarding the fitment specially on the side of the bumper. so i got 3 lips from our workshop that went out from the exact same mold and did the test fit myself. and it did fit like a glove if you push the sides. this kind of lip need to be installed carefully, thats why we dont recommend doubleside tape for the install. - The bumper need to be removed. - The lip need to be installed with the help of another person in order to get all the sides flush, its not a one person job - We recommend using screws on the lower part and on the rear side parts to make sure the lip is holding properly and then in the middle use silicon for a flushy look. we do test all our products before sending them. and we do have original 370z bumper and full interior kit in order to have happy customer, along the way some stuff happens but no biggy . i am sure you guys can handle it. let us know how it goes guys.. and we will always be there to support you. B.R Naj __________________ CS 2018 Summer Nismo NEW GB............MOONBEAM Forum OFFER.....................09-14 CS Nismolipkit Forum OFFER Facebook.... Instagram ....Website

06-07-2012, 01:02 PM	#188 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Thanks for the tips Tommy and Carbon Signal. I will remove my front bumper and get it fitted. I'm sure it will work out. Rep'd Thanks __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
►►►► Agency Power Catback Exhaust - In Stock - Free Shipping - AMAZING PRICE ◄◄◄◄	THMotorsports	Exhaust/Intake	1223	07-16-2015 11:56 AM
►►► GiroDisc 2 Piece Floating Rotors \| Group Buy \| THMotorsports \| Free Shipping \|	THMotorsports	Group Buys	22	10-13-2011 10:30 AM
★ Jersey Import Night - End of the Summer Car Meet. ★	JerseyImportz	North East Region	8	09-01-2011 05:50 PM
◄Stillen/Injen CAI ║ Borla Exhaust/Berk HFC's ║ Tanabe Coils/SPC Rear Arms►	ONEighty	Parts for sale (Private Classifieds)	14	09-07-2010 12:03 PM
Spocom 2010 ★ Long Beach, CA	Celcius	Nissan 370Z Photos / Spyshots / Video / Media Gallery	3	07-24-2010 10:14 PM

06-06-2012, 03:38 PM	#185 (permalink)
anthonyy A True Z Fanatic Join Date: Apr 2011 Location: Los Gatos, CA Posts: 1,027 Drives: Lexus CT Rep Power: 16	I paid 200 w install Sent from my SAMSUNG-SGH-I777 using Tapatalk 2

06-11-2012, 12:23 AM	#191 (permalink)
anthonyy A True Z Fanatic Join Date: Apr 2011 Location: Los Gatos, CA Posts: 1,027 Drives: Lexus CT Rep Power: 16	The lip actually fits really well. There's just a small 2-3 mm gap on the drivers side about an inch in length. We removed the bumper and drilled from the inside of the bumper so the screws would pull the lip in to make it fit. Everything turned out awesome... There was minor prep work needed, but all in all I am very satisfied. Just like the real thing for a fraction of the price! (sorry jdm guys) Sent from my SAMSUNG-SGH-I777 using Tapatalk 2

06-11-2012, 12:39 AM	#192 (permalink)
2ndChance Base Member Join Date: Feb 2011 Location: Panama Posts: 240 Drives: like he stole it Rep Power: 199	Great to hear!! any pics??

06-11-2012, 01:08 AM	#194 (permalink)
anthonyy A True Z Fanatic Join Date: Apr 2011 Location: Los Gatos, CA Posts: 1,027 Drives: Lexus CT Rep Power: 16	Sent from my SAMSUNG-SGH-I777 using Tapatalk 2

06-11-2012, 06:51 AM	#195 (permalink)
sinceday1 Track Member Join Date: Oct 2009 Location: Canada Posts: 514 Drives: 09 Nissan 370Z M6 Rep Power: 17	Just to give you guys an idea of how the SP spoiler was cut.