Z's with Sunline, Aero Jacket, Shine Auto rear spats

Huckleberry · 01-19-2014, 01:58 AM

Go to Home Depot, or whatever you guys have over there, look at brackets. Put in a vice and bend by hand.

T-Rex57 · 01-19-2014, 03:31 AM

Quote:

Originally Posted by Huckleberry

Go to Home Depot, or whatever you guys have over there, look at brackets. Put in a vice and bend by hand.

I'll give this a shot. Does anyone have any photos of the Sunline ones I can use as a reference?

mag_black · 01-19-2014, 11:47 AM

First page on this thread.

Quote:

Originally Posted by TheGreatOne

Yup, its actually in Kev's thread, but see below:

So doesn't look like much, just additional support.

I can grab some stuff from Home Depot and make something similar...my Shine Auto Piece did have a hole pre drilled for a bracket/anchor

I just don't want this thing to blow off lol

Huckleberry · 01-19-2014, 11:54 AM

i think they have something similiar to that in the door section?

ParkStr8 · 02-09-2014, 09:23 AM

Went to the Sunline link - and the spats are over $1k??? Back to Z1, thank you...

equalme · 02-09-2014, 09:51 AM

Are y'all removing the factory splash guard? I test fitted the shine spats and they fitted right over them.

OldFart · 02-09-2014, 07:24 PM

Quote:

Originally Posted by equalme

Are y'all removing the factory splash guard? I test fitted the shine spats and they fitted right over them.

I did... remove them that is...

Luciano13 · 02-13-2014, 05:48 PM

Go Seibon brother.
Ils sont les meilleurs

Zoren 370 · 07-15-2014, 08:01 PM

Ok which one you think guys better in workmanship with CF rear spats shine auto or aerojackets? Im about to do this but which brand is better?
Thanks.

virtuosoondis · 07-18-2014, 07:58 PM

Can anyone help,I have a problem,I have brackets screws and all but my 3m acrylic double sided is just not sticking to keep it flush on the end part where spats sit on top of exhaust.anyone know what I can use.

JSON · 06-28-2016, 10:52 PM

Just bought these from a member. I can't see the initial Sunline bracket picture, but from what I can gather, the bracket goes from the bottom bolt hole (I have two holes on the spats where the mud guard front would be)....to where? I haven't tried installing it but am not seeing where the other side of it would go, unless the bracket is basically just bracing the bumper from the top hole to the bottom hole on the mud guard area.

Also, any opinions on which 3M double sided tape to use? I remember using one on my old car for the front license plate, but the tape was kind of thick (1/8"?). I was worried using something like that because of the gap between the bumper and the spats. It did hold though.

01-19-2014, 01:58 AM	#1 (permalink)
Huckleberry Enthusiast Member Join Date: Apr 2012 Location: Los Angeles Age: 39 Posts: 410 Drives: Z Rep Power: 14	Go to Home Depot, or whatever you guys have over there, look at brackets. Put in a vice and bend by hand. __________________

01-19-2014, 11:54 AM	#4 (permalink)
Huckleberry Enthusiast Member Join Date: Apr 2012 Location: Los Angeles Age: 39 Posts: 410 Drives: Z Rep Power: 14	i think they have something similiar to that in the door section? __________________

02-09-2014, 09:51 AM	#6 (permalink)
equalme Track Member Join Date: Feb 2013 Location: Kansas City Posts: 656 Drives: RCF Rep Power: 14	Are y'all removing the factory splash guard? I test fitted the shine spats and they fitted right over them. __________________ ---Get your door handles painted---

02-13-2014, 05:48 PM	#8 (permalink)
Luciano13 A True Z Fanatic Join Date: Mar 2013 Location: Canada Posts: 2,130 Drives: 2016 Solid Redz Rep Power: 246	Go Seibon brother. Ils sont les meilleurs __________________ http://www.the370z.com/members-370z-...lid-red-z.html

07-18-2014, 07:58 PM	#10 (permalink)
virtuosoondis Enthusiast Member Join Date: Jun 2011 Location: texas Posts: 301 Drives: 11 black nissan 370z Rep Power: 14	Hey guys Can anyone help,I have a problem,I have brackets screws and all but my 3m acrylic double sided is just not sticking to keep it flush on the end part where spats sit on top of exhaust.anyone know what I can use. __________________ from dat 671

02-09-2014, 09:23 AM	#5 (permalink)
ParkStr8 Enthusiast Member Join Date: Mar 2009 Location: Dallas, Tx Posts: 361 Drives: 2015 370z Sport Tech Rep Power: 17	Went to the Sunline link - and the spats are over $1k??? Back to Z1, thank you...

07-15-2014, 08:01 PM	#9 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913654	Ok which one you think guys better in workmanship with CF rear spats shine auto or aerojackets? Im about to do this but which brand is better? Thanks.

06-28-2016, 10:52 PM	#11 (permalink)
JSON Base Member Join Date: Jul 2015 Location: Houston Posts: 50 Drives: 09 AW 370Z Sport 6MT Rep Power: 10	Just bought these from a member. I can't see the initial Sunline bracket picture, but from what I can gather, the bracket goes from the bottom bolt hole (I have two holes on the spats where the mud guard front would be)....to where? I haven't tried installing it but am not seeing where the other side of it would go, unless the bracket is basically just bracing the bumper from the top hole to the bottom hole on the mud guard area. Also, any opinions on which 3M double sided tape to use? I remember using one on my old car for the front license plate, but the tape was kind of thick (1/8"?). I was worried using something like that because of the gap between the bumper and the spats. It did hold though.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sunline rear Aero Spats...pics for those w/ install questions!	kevr6	Exterior & Interior	25	05-04-2014 04:01 PM
[FOR SALE] FS: Shine Auto Rear Spats	js1	Parts for sale (Private Classifieds)	23	11-23-2011 07:19 PM
Sunline or Shine Auto	happytheman	Exterior & Interior	16	06-28-2011 06:15 PM
F/S Replica Sunline rear spats FRP (socal)	Junior370z	Parts for sale (Private Classifieds)	21	05-11-2011 08:20 AM
Wtb: sunline or shine auto rear spats	Flushnismo	Parts for sale (Private Classifieds)	4	04-05-2011 10:01 AM