PASSWORD JDM ENGINE COVERS Fitment issues?

DrEvil · 02-19-2012, 09:09 AM

Quote:

Originally Posted by simota1

thanks man!!! so maybe ill get the bat cover and fuse cover asap and wait on the radiator cover

As far as I know, they haven't shipped the radiator covers. I called them about a month ago ( this all started in mid December) and at that time they were waiting..... as am I.

phelan · 02-19-2012, 01:20 PM

dammit i keep forgetting to get pictures for you lol

i'll do it today

simota1 · 02-19-2012, 06:18 PM

Quote:

Originally Posted by phelan

dammit i keep forgetting to get pictures for you lol

i'll do it today

no rush man

Nikkolai · 03-05-2012, 11:14 PM

I might want to reorder them if they fix the fitment issues. Maybe kevlar this time.

Boost_lee · 03-06-2012, 02:06 AM

Update on my radiator piece - it's rubbing on the underside of thehood. And it's hard to close the hood too.

simota1 · 01-05-2013, 10:01 AM

So i have the answer to this..... since i bought them

now... how can i describe the password jdm covers... hmmmm lets see.... ABSOLUTELY GARBAGE... f*ck the cooling plate it does not fit if my life depended on it... not to mention its rubbing somewhere and i have no idea where the hell its rubbing

the carbon fiber quality is so poor... dull as **** in some spots, im definitely gonna have to reclear all the PWJDM covers

not to mention when i first closed my hood it was uneven, higher on one side so i played with the rubber bumpers and evened out the hood... now it feels like there is so much tension on my hood when i open it.... feels like ill snap the cable when i tug on it to open it.... worst of all i ended up losing my hood struts.... because they were hitting the engine compartments

In all honesty i could care less about it being dull and hell in those spots, but thats what clear coat is for BUT at least FIT RIGHT... you know?! i mean this isnt a freaking knock off of another part. Its the real deal, not to mention these covers are pretty damn expensive and the fact the cooling plate dont fit right just pisses me off

Does anyone know how to fix the fitment issue with the cooling plate? i filed down some areas and made it fit my only concern is the way the tension feels on the cable release....

Jasonle · 01-05-2013, 12:11 PM

that sucks man!

DrEvil · 01-08-2013, 07:19 PM

Was that piece from the late 2011 run, or early 2012? The later run fit far better and I have no issues with it.ImageUploadedByTapatalk1357690746.669463.jpg

simota1 · 01-08-2013, 10:27 PM

i just bought it december 2012.. the person i bought it from thirdgearperformance didnt carry them for a while.... so these are the V2 already

JC671 · 01-09-2013, 04:39 AM

Sorry to hear bro. For as much as JDM parts cost, companies need to either pony up the refunds or do better R&D rather than making or obtaining a part from an outside source and slapping their name on it to make the quick buck.

This is why I have swayed away from modding aesthetic mods from OEM. Fitment issues are a headache and cost more money from the already overpriced part.

Simota, I feel your pain man. Hope you can get it fixed the right way.

simota1 · 01-09-2013, 06:24 AM

sup man... yah fitment issues do suck.... i was able to work it out already though... they are just clearcoating them now so almost all done

Carbon Fiber Element · 01-09-2013, 08:06 AM

I gotta keep up with these threads more. I didn't even realize that they make their covers as one whole piece instead of 2 like the stock ones come. I did this to my own 350z covers a couple years back. Molded them together and then cf'd the whole setup. Fit is 100% and I did some painting on them too. Ill get pics up hopefully later today so you guys can see.

FuszNissan · 01-09-2013, 08:44 AM

That sucks sim, I was about to pull the triggers on these.

CFE, what's the difference with yours? Wet carbon wrap of OEM vs. Dry Carbon Replacement?

simota1 · 01-09-2013, 02:38 PM

Quote:

Originally Posted by Carbon Fiber Element

I gotta keep up with these threads more. I didn't even realize that they make their covers as one whole piece instead of 2 like the stock ones come. I did this to my own 350z covers a couple years back. Molded them together and then cf'd the whole setup. Fit is 100% and I did some painting on them too. Ill get pics up hopefully later today so you guys can see.

the top pieces fit good though

no problems there... its the cooling plate that kicked my ***....

Quote:

Originally Posted by FuszNissan

That sucks sim, I was about to pull the triggers on these.

CFE, what's the difference with yours? Wet carbon wrap of OEM vs. Dry Carbon Replacement?

his own fits correctly.. no fitment issues

after what i went through with the password jdm... i wish i just went with tonys stuff...

theDreamer · 01-09-2013, 02:42 PM

My top pieces (battery & brake) are great, but the radiator cooling cover rubs on the passenger side.

02-19-2012, 01:20 PM	#17 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	dammit i keep forgetting to get pictures for you lol i'll do it today __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

03-06-2012, 02:06 AM	#20 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	Update on my radiator piece - it's rubbing on the underside of thehood. And it's hard to close the hood too. __________________ My TT Z

01-05-2013, 10:01 AM	#21 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	So i have the answer to this..... since i bought them now... how can i describe the password jdm covers... hmmmm lets see.... ABSOLUTELY GARBAGE... fck the cooling plate it does not fit if my life depended on it... not to mention its rubbing somewhere and i have no idea where the hell its rubbing the carbon fiber quality is so poor... dull as * in some spots, im definitely gonna have to reclear all the PWJDM covers not to mention when i first closed my hood it was uneven, higher on one side so i played with the rubber bumpers and evened out the hood... now it feels like there is so much tension on my hood when i open it.... feels like ill snap the cable when i tug on it to open it.... worst of all i ended up losing my hood struts.... because they were hitting the engine compartments In all honesty i could care less about it being dull and hell in those spots, but thats what clear coat is for BUT at least FIT RIGHT... you know?! i mean this isnt a freaking knock off of another part. Its the real deal, not to mention these covers are pretty damn expensive and the fact the cooling plate dont fit right just pisses me off Does anyone know how to fix the fitment issue with the cooling plate? i filed down some areas and made it fit my only concern is the way the tension feels on the cable release.... __________________ TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/**

01-05-2013, 12:11 PM	#22 (permalink)
Jasonle A True Z Fanatic Join Date: Jan 2011 Location: St. Louis Posts: 3,509 Drives: 09 370z Rep Power: 25	that sucks man! __________________ 2009 Nissan 370z/2003 Honda Soccer Van Shineauto Amuse Body Kit/UAM Fenders/Bc Br Coilovers/Topspeed Exhaust/Racing Hart Wheels and More My Sexy Beast

01-08-2013, 10:27 PM	#24 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	i just bought it december 2012.. the person i bought it from thirdgearperformance didnt carry them for a while.... so these are the V2 already __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

03-05-2012, 11:14 PM	#19 (permalink)
Nikkolai Base Member Join Date: Jun 2010 Location: DFW Posts: 238 Drives: Boss 302, Frontier Rep Power: 15	I might want to reorder them if they fix the fitment issues. Maybe kevlar this time.

01-08-2013, 07:19 PM	#23 (permalink)
DrEvil Enthusiast Member Join Date: Jan 2011 Location: New Jersey Posts: 270 Drives: 09 370z,Blue, auto Rep Power: 14	Was that piece from the late 2011 run, or early 2012? The later run fit far better and I have no issues with it.ImageUploadedByTapatalk1357690746.669463.jpg

01-09-2013, 04:39 AM	#25 (permalink)
JC671 Enthusiast Member Join Date: Feb 2011 Location: Guam Posts: 451 Drives: Toretto around Rep Power: 14	Sorry to hear bro. For as much as JDM parts cost, companies need to either pony up the refunds or do better R&D rather than making or obtaining a part from an outside source and slapping their name on it to make the quick buck. This is why I have swayed away from modding aesthetic mods from OEM. Fitment issues are a headache and cost more money from the already overpriced part. Simota, I feel your pain man. Hope you can get it fixed the right way. __________________ A special "Thank You" to the Fast Intentions Crew! "Fueled By Passion"

01-09-2013, 06:24 AM	#26 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	sup man... yah fitment issues do suck.... i was able to work it out already though... they are just clearcoating them now so almost all done __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

01-09-2013, 08:06 AM	#27 (permalink)
Carbon Fiber Element Track Member Join Date: Oct 2009 Location: nj Posts: 937 Drives: 04 nissan 350z db m6 Rep Power: 199	I gotta keep up with these threads more. I didn't even realize that they make their covers as one whole piece instead of 2 like the stock ones come. I did this to my own 350z covers a couple years back. Molded them together and then cf'd the whole setup. Fit is 100% and I did some painting on them too. Ill get pics up hopefully later today so you guys can see. __________________ http://i329.photobucket.com/albums/l...2623_HDR-1.jpg Text or call 732.754.0423 LIKE US ON FACEBOOK Follow us on Instagram @Carbonfiberelement

01-09-2013, 08:44 AM	#28 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 542	That sucks sim, I was about to pull the triggers on these. CFE, what's the difference with yours? Wet carbon wrap of OEM vs. Dry Carbon Replacement? __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

01-09-2013, 02:42 PM	#30 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	My top pieces (battery & brake) are great, but the radiator cooling cover rubs on the passenger side. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Password:JDM Dry Carbon Fiber / Kevlar Cooling Plates & Engine Compartment Covers	PasswordJDM	Drivetrain/Engine	19	05-11-2013 11:02 AM
[FOR SALE] Password:JDM Engine Bay Carbon Covers	Nikkolai	Parts for sale (Private Classifieds)	10	12-15-2011 12:47 PM
Password JDM Engine Compartment covers	vividracing	Vivid Racing	0	04-22-2010 03:57 PM