PASSWORD JDM ENGINE COVERS Fitment issues?

simota1 · 02-17-2012, 08:27 AM

SO... ive read that the radiator cover has fitment issues? is this true? im looking into purchasing these engine covers pretty soon but i decided to hold off because ive read that it rubs or something like that? can some people who own the covers chime in?

kensnismo · 02-17-2012, 10:52 AM

I believe they are working on a new one.E-mail them and find out and yes earlier one had some fitment problems.still a good company to work with they stand behind thier stuff.

Lemers · 02-17-2012, 11:03 AM

It would be nice that anyone that had issues post pictures of the problem or damage.

kenchan · 02-17-2012, 11:15 AM

i believe someone did post up picts in the past of this known problem.

2theextreme · 02-17-2012, 11:18 AM

sim, I have 'em. I had rubbing issues but it wasn't from the design of the engine covers. It was from the shotty designed hood I had before. There are visible rubs on my engine covers now but as I stated, it was not Password:JDM's design. Since switching to the Varis hood everything is good to go.

I would say that you should have no rubbing issues if you decide to get them.

ClemsonWill · 02-17-2012, 11:31 AM

I'm not trying to discredit Password JDM but I will give my experience with the only product I ordered from them. It was the full dry carbon intake system for my S2000. About a $1300 intake. The first one I got did not fit and had some major imperfections in the CF. They sent me a second one with very similar issues. Many of the wholes didn't line up, cf was bunched up and sanded down in corners, etc. They did offer to send me a third however I just got a refund. Customer service was good with the exception that they feel these fitment and fabrication flaws are acceptable with dry carbon. Now that was my first dry carbon product but I have had a number of regular cf products with no issues like this. I was a bit disappointed in the whole thing.

Ages · 02-17-2012, 12:20 PM

Why not just have CFE wrap your OEMs. Isn't he doing some interior for you anyways?

simota1 · 02-17-2012, 03:19 PM

Quote:

Originally Posted by Ages

Why not just have CFE wrap your OEMs. Isn't he doing some interior for you anyways?

yes he is bro

thats my biggest debate.... i like the design of the passwords... the kool looking hump up top and then the bigger shroud on the bottom.... but if they have problems ill just have carbon do mine i guess...

simota1 · 02-17-2012, 03:19 PM

thanks for everyones input btw

Boost_lee · 02-17-2012, 06:32 PM

Can't comment on mine, I drilled them out to slide over my hood struts in case I need emergency removal to access my battery or reservoirs.
The radiator shroud, I heard, had issues. I'm the third owner on mine and there is a good two inch crack on it. I'm fine with it though

phelan · 02-17-2012, 06:56 PM

sim i'll see if i can take a pic of the radiator cover i have on rin. there's some issues with it, but nothing serious.

Nikkolai · 02-17-2012, 07:11 PM

For how much they cost me, I was quite disappointed. Yea, the radiator cover rubs the hood and it's freaking hard to close the hood correctly. The brake fluid cover was rubbing up against the lever that holds the hood. The only one that fit fine was the battery cover.

simota1 · 02-17-2012, 07:27 PM

Quote:

Originally Posted by phelan

sim i'll see if i can take a pic of the radiator cover i have on rin. there's some issues with it, but nothing serious.

thanks bro

DrEvil · 02-18-2012, 10:02 AM

Quote:

Originally Posted by kenchan

i believe someone did post up picts in the past of this known problem.

I was one of the posters about that. There was something with the right side of the cover that was a little higher than the left not allowing the hood to close propperly.
Also the cutout for the hoodstrut clip was too small to fit the clip.
After talking with the folks at JDM, I was sent a UPS return label and after they recieved the part they told that they had a bad batch and are currently awainting for their cf people to provide them ones that are up to propper spec.
BTW I have their cf covers for the battery and fuse covers.
Those look and fit great.Now,I'm just waiting for the radiator cover.

simota1 · 02-18-2012, 03:58 PM

thanks man!!! so maybe ill get the bat cover and fuse cover asap and wait on the radiator cover

02-17-2012, 08:27 AM	#1 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	PASSWORD JDM ENGINE COVERS Fitment issues? SO... ive read that the radiator cover has fitment issues? is this true? im looking into purchasing these engine covers pretty soon but i decided to hold off because ive read that it rubs or something like that? can some people who own the covers chime in? __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

02-17-2012, 11:03 AM	#3 (permalink)
Lemers A True Z Fanatic Join Date: Mar 2010 Location: Izmir, Turkey Posts: 15,371 Drives: 2012 Traverse LTZ Rep Power: 52	It would be nice that anyone that had issues post pictures of the problem or damage. __________________ 2010 Black Cherry Touring/Sport/Nav Now - 2012 Travese LTZ until I leave for Turkey

02-17-2012, 11:18 AM	#5 (permalink)
2theextreme RIP Tony :( (1969-2015) Join Date: Feb 2009 Location: Northern Virginia Posts: 18,802 Drives: '14 Mustang GT/CS Rep Power: 67	sim, I have 'em. I had rubbing issues but it wasn't from the design of the engine covers. It was from the shotty designed hood I had before. There are visible rubs on my engine covers now but as I stated, it was not Password:JDM's design. Since switching to the Varis hood everything is good to go. I would say that you should have no rubbing issues if you decide to get them. __________________ SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips

02-17-2012, 11:31 AM	#6 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 445	I'm not trying to discredit Password JDM but I will give my experience with the only product I ordered from them. It was the full dry carbon intake system for my S2000. About a $1300 intake. The first one I got did not fit and had some major imperfections in the CF. They sent me a second one with very similar issues. Many of the wholes didn't line up, cf was bunched up and sanded down in corners, etc. They did offer to send me a third however I just got a refund. Customer service was good with the exception that they feel these fitment and fabrication flaws are acceptable with dry carbon. Now that was my first dry carbon product but I have had a number of regular cf products with no issues like this. I was a bit disappointed in the whole thing. __________________ Slightly modded

02-17-2012, 12:20 PM	#7 (permalink)
Ages Base Member Join Date: Oct 2011 Location: MA Posts: 184 Drives: 11 370Z SP MT Gunmet Rep Power: 14	Why not just have CFE wrap your OEMs. Isn't he doing some interior for you anyways? __________________ F.I.CBE\|F.I.HFC\|20/25mm Z1 Spacers\|CS TypeN Wing(cf)\|CS Diffuser (cf)\|EvoR Fangs(cf)\|EvoR Type2 Front Lip\|Evor Side Blades\|Stillen Gen3\|JDM Fog\|

02-17-2012, 10:52 AM	#2 (permalink)
kensnismo Enthusiast Member Join Date: Jan 2011 Location: north tx Posts: 324 Drives: ZL-1 Rep Power: 14	I believe they are working on a new one.E-mail them and find out and yes earlier one had some fitment problems.still a good company to work with they stand behind thier stuff.

02-17-2012, 11:15 AM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i believe someone did post up picts in the past of this known problem.

02-17-2012, 03:19 PM	#9 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	thanks for everyones input btw __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

02-17-2012, 06:32 PM	#10 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	Can't comment on mine, I drilled them out to slide over my hood struts in case I need emergency removal to access my battery or reservoirs. The radiator shroud, I heard, had issues. I'm the third owner on mine and there is a good two inch crack on it. I'm fine with it though __________________ My TT Z Last edited by Boost_lee; 02-17-2012 at 06:34 PM.

02-17-2012, 06:56 PM	#11 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	sim i'll see if i can take a pic of the radiator cover i have on rin. there's some issues with it, but nothing serious. __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

02-17-2012, 07:11 PM	#12 (permalink)
Nikkolai Base Member Join Date: Jun 2010 Location: DFW Posts: 238 Drives: Boss 302, Frontier Rep Power: 15	For how much they cost me, I was quite disappointed. Yea, the radiator cover rubs the hood and it's freaking hard to close the hood correctly. The brake fluid cover was rubbing up against the lever that holds the hood. The only one that fit fine was the battery cover.

02-18-2012, 03:58 PM	#15 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	thanks man!!! so maybe ill get the bat cover and fuse cover asap and wait on the radiator cover Chuy likes this. __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Password:JDM Dry Carbon Fiber / Kevlar Cooling Plates & Engine Compartment Covers	PasswordJDM	Drivetrain/Engine	19	05-11-2013 11:02 AM
[FOR SALE] Password:JDM Engine Bay Carbon Covers	Nikkolai	Parts for sale (Private Classifieds)	10	12-15-2011 12:47 PM
Password JDM Engine Compartment covers	vividracing	Vivid Racing	0	04-22-2010 03:57 PM