Need advise on tint.....

shesha · 05-28-2009, 04:06 PM

I got my tints done last Saturday.

I noticed the corner of both sides started to creep up due to the constant opening and closing of the window when you open the doors.

I stupidly brabed a razor, and cut off the edge, thinking if I don't it will keep getting worse and worse. The window is fine now.

From the outside you can't tell that the corner is missing.
From the inside there is a quarter of an inch visible that is missing tint now.

Should I leave it alone, or go get it fixed on Saturday?
I already know from my conversation with tthe tint place, that they are going to give me a real hard time becausee I fd with the tint the way I did.

So, am i being anal about the qtr inch, or should I just get it redone, even if I get charged.

Thanks. I didn't realize how bad my OCD is until this happened to me.

WShade · 05-28-2009, 04:13 PM

Don't worry I am the same way although I would think that is an install issue. Mine did not do this. Did they use a heat gun right after install to help with the drying? I would take it back anyway.

shesha · 05-28-2009, 04:17 PM

Yeah man I think I will. If it bothers me this much to post this I will take it back and be done with it.

I don't know if the used a heat gun or not. Im in LA, and it was a hot day.

LOL I remeber laying in bed the day it happened and thinking about it. Thats when i realized man I have OCD.

AK370Z · 05-28-2009, 04:20 PM

Got my 370Z tinted today!

Quote:

Originally Posted by AK370Z

I was driving the other day and made a shocking discovery. Tint area close to the side view mirror is peeling. I called Shades of gray and set up an appointment to come in.

Upon arrival, I was told that some G37s have this issue as well. This is NOT something new but they didn't expect 370Z to have it. They are actually going to pay extra attention to this area on all incoming 370Zs. They quickly removed my old tint and put a brand new tint on - no questions ask. Their installation carries lifetime warranty

. I have also noticed that instead of having a corner, they cut an oval shape border by the side view mirror area this time. So, if you're getting your tint done, tell them to pay special attention to this area and if possible cut an "oval" shape border instead of a corner. Also, tell them to use the heat gun for a little longer than usual and keep the door open (they may forget sometimes that our glass DOES go up/down )

shesha · 05-28-2009, 04:25 PM

Thats exactley what happened to me.

Thanks for the advise. I will go Saturday, and tell them about the oval shape.

RCZ · 05-28-2009, 04:54 PM

Happened to me too. Adds character.

CBRich · 05-28-2009, 05:06 PM

This is good to know. I'm sure the auto down/up of the window when opening the door only makes things worse. I'll make sure to talk about this with my installer specifically.

shesha · 05-28-2009, 05:45 PM

Quote:

Originally Posted by RCZ

Happened to me too. Adds character.

What does?

Cypress · 05-28-2009, 06:53 PM

370Z Touring Sport...

Same thing happened to me. The dealer tinted the car before I bought it. When I took it home, I saw the same peeling in the same driver and passenger side corners.

My car is currently at the dealer to have the tint redone. If it peels again, I will have them remove the tint all together. I can do without it.

shesha · 05-28-2009, 07:10 PM

Yeah man I was thinking the same if this is going to be a problem for me again I will just remove and do with out.

But in LA summer can be unbearable!!!!!!!!!!!!!!!!!!!!!!!!!

WShade · 05-28-2009, 08:44 PM

My installer made the bottom slightly longer at the bottom and used a flat spatula looking thing to tuck it in. The seam is not disturbed when the window cracks.

StLRedrider · 05-28-2009, 08:51 PM

This might be a stupid question but do they apply the tint on inside or outside? The reason i'm asking after seeing the pics is, i stopped and talked to a installer out on site and he was installing on the outside. Said he would do the whole z for $175.00.

WShade · 05-28-2009, 08:53 PM

Inside. They precut on the outside and then transfer. Look into Hüper Optik ceramic tint, it is expensive but worth it in my opinion. I have it on all my cars and would not think twice about doing it again.

cwj370 · 05-28-2009, 09:28 PM

The guy that did mine uses some sort of clamp to keep the door button pushed in. The car thinks the door is closed and the windows stay open.

WShade · 05-28-2009, 11:46 PM

Quote:

Originally Posted by cwj370

The guy that did mine uses some sort of clamp to keep the door button pushed in. The car thinks the door is closed and the windows stay open.

Same here.

05-28-2009, 04:06 PM	#1 (permalink)
shesha Base Member Join Date: May 2009 Location: Los Angeles Posts: 159 Drives: 370z Silver Rep Power: 16	Need advise on tint..... I got my tints done last Saturday. I noticed the corner of both sides started to creep up due to the constant opening and closing of the window when you open the doors. I stupidly brabed a razor, and cut off the edge, thinking if I don't it will keep getting worse and worse. The window is fine now. From the outside you can't tell that the corner is missing. From the inside there is a quarter of an inch visible that is missing tint now. Should I leave it alone, or go get it fixed on Saturday? I already know from my conversation with tthe tint place, that they are going to give me a real hard time becausee I fd with the tint the way I did. So, am i being anal about the qtr inch, or should I just get it redone, even if I get charged. Thanks. I didn't realize how bad my OCD is until this happened to me.

05-28-2009, 04:13 PM	#2 (permalink)
WShade Track Member Join Date: Jan 2009 Location: San Antonio, TX Posts: 765 Drives: 09 370Z T/S/N Rep Power: 187	Don't worry I am the same way although I would think that is an install issue. Mine did not do this. Did they use a heat gun right after install to help with the drying? I would take it back anyway. __________________ Q50S Q60 RS400

05-28-2009, 06:53 PM	#9 (permalink)
Cypress Base Member Join Date: May 2009 Location: Cypress, TX Posts: 49 Drives: 370Z Touring Sport Rep Power: 16	Same here!!! 370Z Touring Sport... Same thing happened to me. The dealer tinted the car before I bought it. When I took it home, I saw the same peeling in the same driver and passenger side corners. My car is currently at the dealer to have the tint redone. If it peels again, I will have them remove the tint all together. I can do without it.

05-28-2009, 08:44 PM	#11 (permalink)
WShade Track Member Join Date: Jan 2009 Location: San Antonio, TX Posts: 765 Drives: 09 370Z T/S/N Rep Power: 187	My installer made the bottom slightly longer at the bottom and used a flat spatula looking thing to tuck it in. The seam is not disturbed when the window cracks. __________________ Q50S Q60 RS400

05-28-2009, 08:51 PM	#12 (permalink)
StLRedrider A True Z Fanatic Join Date: Jan 2009 Location: St.louis,Mo Posts: 17,755 Drives: O9Sprt/Touring,p-51 Rep Power: 60	This might be a stupid question but do they apply the tint on inside or outside? The reason i'm asking after seeing the pics is, i stopped and talked to a installer out on site and he was installing on the outside. Said he would do the whole z for $175.00. __________________ Dream as if you'll live forever, live as if you'll die today J.Dean Last edited by StLRedrider; 05-28-2009 at 08:59 PM.

05-28-2009, 04:17 PM	#3 (permalink)
shesha Base Member Join Date: May 2009 Location: Los Angeles Posts: 159 Drives: 370z Silver Rep Power: 16	Yeah man I think I will. If it bothers me this much to post this I will take it back and be done with it. I don't know if the used a heat gun or not. Im in LA, and it was a hot day. LOL I remeber laying in bed the day it happened and thinking about it. Thats when i realized man I have OCD.

05-28-2009, 04:25 PM	#5 (permalink)
shesha Base Member Join Date: May 2009 Location: Los Angeles Posts: 159 Drives: 370z Silver Rep Power: 16	Thats exactley what happened to me. Thanks for the advise. I will go Saturday, and tell them about the oval shape.

05-28-2009, 04:54 PM	#6 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Happened to me too. Adds character.

05-28-2009, 05:06 PM	#7 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	This is good to know. I'm sure the auto down/up of the window when opening the door only makes things worse. I'll make sure to talk about this with my installer specifically.

05-28-2009, 07:10 PM	#10 (permalink)
shesha Base Member Join Date: May 2009 Location: Los Angeles Posts: 159 Drives: 370z Silver Rep Power: 16	Yeah man I was thinking the same if this is going to be a problem for me again I will just remove and do with out. But in LA summer can be unbearable!!!!!!!!!!!!!!!!!!!!!!!!!

05-28-2009, 08:53 PM	#13 (permalink)
WShade Track Member Join Date: Jan 2009 Location: San Antonio, TX Posts: 765 Drives: 09 370Z T/S/N Rep Power: 187	Inside. They precut on the outside and then transfer. Look into Hüper Optik ceramic tint, it is expensive but worth it in my opinion. I have it on all my cars and would not think twice about doing it again. __________________ Q50S Q60 RS400 Last edited by WShade; 05-28-2009 at 08:57 PM.

05-28-2009, 09:28 PM	#14 (permalink)
cwj370 Base Member Join Date: Apr 2009 Location: Tennessee Posts: 121 Drives: 09 370z Bl Tour Auto Rep Power: 16	The guy that did mine uses some sort of clamp to keep the door button pushed in. The car thinks the door is closed and the windows stay open.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Solid Red, 35% tint	m4a1mustang	Exterior & Interior	22	04-25-2012 02:58 PM
My wheel and tire setup - need expert advise.	DannyGT	Wheels & Tires	45	04-07-2011 12:08 AM
Tint in Houston	theDreamer	Texas	8	09-17-2009 02:00 AM
USAA discount on 370Z, please advise . . .	subterfuge242	Nissan 370Z Pricing / Ordering Discussions	28	09-08-2009 09:50 PM
Getting tint done this weekend but not sure on %.	Forumite	Exterior & Interior	17	03-31-2009 04:59 PM