Plasti Dip over spray...
 

Anyone else have a rough time getting the over spray off?! Maybe because its super cold in my basement? I tried washing, even clay bar and the little specs are still everywhere... Dont really want to resort to using dw40, and better idea? Thanks...

What's the overspray on? WD40 won't hurt 99% of stuff. Bug & Tar remover might be an option, too.

yah, i ran into the same shitt when i tried plasti-dip in my garage. i used clay bar.

WD40 wont hurt, but you will need to wash and wax cause WD40 will dissolve wax/polymers.

I find a good Terri cloth and firm rubbing works well... *my opinion

Sent from my DROID RAZR using Tapatalk

Spray thicker coats so it builds up and easier to peel

hey guys i ran into that problem but i thought about it and i had a can of turtle wax bug and tar remover....ect i used to take stickers off well i just dabed it on a dry cloth comes off like a charm!

BTW DO NOT RUB HARD ON BLACK PAINT its a b and it leaves bad swirls!

:tup: you waste it but it sure is the best way to get rid of the overspray :tup:

Did the rear diffuser today. >=)

Use this:

http://www.repaintsupply.com/prod_im.../Prep-All1.jpg

Spray it on a rag, wipe it off. It also works great to remove plasti-dip from anything without harming the surface. Make sure you clean it really well after with soap and water.

Use tape to remove overspray, like clear box tape. I spent 30 minutes spraying that stuff and it took me hours to remove the dip from the grooves in the bumper near the exhaust.

Did my rear section also today. By the time I was done it was to dark to take pics.

I cleaned it with rubbing alcohol and a soft cloth. Worked great. Afterwards used a spray on quick wax.

Looks great

:iagree: