Plasti Dip over spray...

AlexRaymond19 · 12-26-2011, 08:16 PM

Anyone else have a rough time getting the over spray off?! Maybe because its super cold in my basement? I tried washing, even clay bar and the little specs are still everywhere... Dont really want to resort to using dw40, and better idea? Thanks...

scottIN · 12-26-2011, 08:57 PM

What's the overspray on? WD40 won't hurt 99% of stuff. Bug & Tar remover might be an option, too.

kenchan · 12-26-2011, 11:09 PM

yah, i ran into the same shitt when i tried plasti-dip in my garage. i used clay bar.

WD40 wont hurt, but you will need to wash and wax cause WD40 will dissolve wax/polymers.

darionlear · 12-26-2011, 11:22 PM

I find a good Terri cloth and firm rubbing works well... *my opinion

Sent from my DROID RAZR using Tapatalk

haitech · 12-27-2011, 12:02 AM

Spray thicker coats so it builds up and easier to peel

Shimmy · 12-29-2011, 12:54 AM

hey guys i ran into that problem but i thought about it and i had a can of turtle wax bug and tar remover....ect i used to take stickers off well i just dabed it on a dry cloth comes off like a charm!

Shimmy · 12-29-2011, 12:55 AM

BTW DO NOT RUB HARD ON BLACK PAINT its a b and it leaves bad swirls!

simota1 · 12-29-2011, 03:25 AM

Quote:

Originally Posted by haitech

Spray thicker coats so it builds up and easier to peel

you waste it but it sure is the best way to get rid of the overspray

darionlear · 12-29-2011, 05:15 PM

Did the rear diffuser today. >=)

TypeOne · 12-29-2011, 05:54 PM

Use this:

Spray it on a rag, wipe it off. It also works great to remove plasti-dip from anything without harming the surface. Make sure you clean it really well after with soap and water.

azn370z · 12-29-2011, 06:10 PM

Use tape to remove overspray, like clear box tape. I spent 30 minutes spraying that stuff and it took me hours to remove the dip from the grooves in the bumper near the exhaust.

SPOHN · 12-29-2011, 07:53 PM

Did my rear section also today. By the time I was done it was to dark to take pics.

OKC Z · 02-24-2012, 11:09 AM

I cleaned it with rubbing alcohol and a soft cloth. Worked great. Afterwards used a spray on quick wax.

NOFATCHX · 02-25-2012, 12:55 AM

Looks great

Baer383 · 02-25-2012, 09:32 AM

Quote:

Originally Posted by kenchan

yah, i ran into the same shitt when i tried plasti-dip in my garage. i used clay bar.

12-26-2011, 08:16 PM	#1 (permalink)
AlexRaymond19 Track Member Join Date: Jun 2011 Location: Maine Posts: 771 Drives: 2010 Nissan 370z Rep Power: 15	Plasti Dip over spray... Anyone else have a rough time getting the over spray off?! Maybe because its super cold in my basement? I tried washing, even clay bar and the little specs are still everywhere... Dont really want to resort to using dw40, and better idea? Thanks... __________________ 2010 370Z Touring MT \| Stillen \| Motordyne \| Momentum\| Z1 \| Fast Intentions \| Advant Garde \| RE11 \| Swift \| SPC \| Quaife \| Whiteline \| Evo R \| 322RWHP 259ft-lb Mustang

12-29-2011, 12:54 AM	#6 (permalink)
Shimmy Base Member Join Date: Dec 2011 Location: oklahoma Age: 31 Posts: 87 Drives: 370z nismo '12 # 23 Rep Power: 14	hey guys i ran into that problem but i thought about it and i had a can of turtle wax bug and tar remover....ect i used to take stickers off well i just dabed it on a dry cloth comes off like a charm! __________________ 2012 nismo z34 #23 -DD // 2006 INGS+1 350z- sold

12-29-2011, 12:55 AM	#7 (permalink)
Shimmy Base Member Join Date: Dec 2011 Location: oklahoma Age: 31 Posts: 87 Drives: 370z nismo '12 # 23 Rep Power: 14	BTW DO NOT RUB HARD ON BLACK PAINT its a b and it leaves bad swirls! __________________ 2012 nismo z34 #23 -DD // 2006 INGS+1 350z- sold

12-29-2011, 06:10 PM	#11 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	Use tape to remove overspray, like clear box tape. I spent 30 minutes spraying that stuff and it took me hours to remove the dip from the grooves in the bumper near the exhaust. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

12-29-2011, 07:53 PM	#12 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Did my rear section also today. By the time I was done it was to dark to take pics. __________________

12-26-2011, 08:57 PM	#2 (permalink)
scottIN Track Member Join Date: Aug 2011 Location: New Castle, Indiana Posts: 764 Drives: '12 370Z Rep Power: 55	What's the overspray on? WD40 won't hurt 99% of stuff. Bug & Tar remover might be an option, too.

12-26-2011, 11:09 PM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yah, i ran into the same shitt when i tried plasti-dip in my garage. i used clay bar. WD40 wont hurt, but you will need to wash and wax cause WD40 will dissolve wax/polymers.

12-26-2011, 11:22 PM	#4 (permalink)
darionlear Enthusiast Member Join Date: Nov 2011 Location: el paso Posts: 418 Drives: 370Z Rep Power: 14	I find a good Terri cloth and firm rubbing works well... *my opinion Sent from my DROID RAZR using Tapatalk

12-27-2011, 12:02 AM	#5 (permalink)
haitech Track Member Join Date: Sep 2011 Location: Austin/Dallas Posts: 922 Drives: 11' 370z Magnetic M6 Rep Power: 15	Spray thicker coats so it builds up and easier to peel

12-29-2011, 05:54 PM	#10 (permalink)
TypeOne A True Z Fanatic Join Date: Jul 2010 Location: Baton Rouge, LA Posts: 2,682 Drives: BSM 370 Rep Power: 1851	Use this: Spray it on a rag, wipe it off. It also works great to remove plasti-dip from anything without harming the surface. Make sure you clean it really well after with soap and water.

02-24-2012, 11:09 AM	#13 (permalink)
OKC Z Base Member Join Date: Feb 2011 Location: OKC Posts: 205 Drives: '09 370z-$old 9/1/12 Rep Power: 14	I cleaned it with rubbing alcohol and a soft cloth. Worked great. Afterwards used a spray on quick wax.

02-25-2012, 12:55 AM	#14 (permalink)
NOFATCHX Track Member Join Date: Apr 2011 Location: New York Posts: 532 Drives: 2011 370Z Rep Power: 15	Looks great __________________ 20x10.5 Vossen CV3s, Falken, Stillen, AAM, Topspeed, BC Racing, ICHIBA, 180 CUSTOM, Satin Pearl White and Carbon wrapped Instagram: 10acious_Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PLASTI DIP Glossifier	DufDaddy	Exterior & Interior	27	06-11-2014 01:30 PM
plasti-dip fangs??	370guy	Exterior & Interior	16	06-26-2012 04:10 PM
Plasti Dip Enhancer!	wdkwang	Exterior & Interior	14	12-18-2011 05:03 PM
Some Plasti-dip fun with Roadster	xinlee	Nissan 370Z Roadster (Convertible)	9	08-22-2011 01:02 AM
Plasti-Dippers!!	delusional	Nissan 370Z Photos / Spyshots / Video / Media Gallery	7	08-06-2011 09:25 AM