Dynamat?

Pelican170 · 12-01-2011, 12:55 PM

Hey guys,

This winter I want to put in some Dynamat to the trunk because i get some rattles that are going to drive me crazy! I see there are a few different types to get, any suggestions or will they all work the same?

nismo 1234 · 12-01-2011, 01:29 PM

i have used extreme dynamat and rattle trap extreme. they both work well. but rattle trap extreme is thicker and better priced!

cheshirecat · 12-01-2011, 01:42 PM

I prefer the regular extreme. Did my 350z hatch area and cut down on noise considerably.

nismonster · 12-01-2011, 01:50 PM

I used 37.5 sq ft of RAAMmat BXT II, it only cost about 100$ shipped and it was enough to cover beneath all carpets and also full hatch area. I was quite liberal with it and went over certain areas twice, or else I probably would have had enough to do the doors also. It was a noticeable difference once installed!

Pelican170 · 12-01-2011, 01:51 PM

Hmmnnn, thanks for the info. Im surprised nobody mentioned the Dynamat Superlite stuff. I was leaning towards that...

kenchan · 12-01-2011, 01:56 PM

there's a thread where i posted which dynamat i used. i cant remember but i bought 2 boxes which were for the doors (amazon) and worked out great for the trunk.

btw, dont go cheap on the roller tool.

Pelican170 · 12-01-2011, 02:19 PM

Quote:

Originally Posted by kenchan

there's a thread where i posted which dynamat i used. i cant remember but i bought 2 boxes which were for the doors (amazon) and worked out great for the trunk.

btw, dont go cheap on the roller tool.

Really? The roller tool is a necessity?? i figured it would just stick easily just by placing it down... Ive never had an experience with Dynamat or the like before..

kenchan · 12-01-2011, 03:02 PM

DEFINETLY get the roller tool. the ones with the hard rubber roller and metal/wooden handle is the one i use. dynamat is pretty thick stuff and if you have air bubbles the dampening performance drops considerably.

TreeSemdyZee · 12-01-2011, 03:13 PM

^+1

This is what I used.

http://www.amazon.com/gp/product/B00...00_i00_details

Roller:

http://www.amazon.com/gp/product/B00...00_i00_details

Pelican170 · 12-01-2011, 03:14 PM

ok good stuff. thanks for all the info guys.

kenchan · 12-01-2011, 03:40 PM

^^ that's the exact roller i gotz.

Pelican170 · 12-01-2011, 04:51 PM

wanna send it my way? lol

vividracing · 12-01-2011, 07:38 PM

There's a product sold at Home Depot and Lowes thats the exact same thing, but a lot cheaper. It's called Peel n Seal. I used it on a build, and it worked well.

Oh and use a heat gun to make it easier to work with if you plan on installing it while it's cold. Even in the summer it can help.

Guard Dad · 12-01-2011, 08:01 PM

Quote:

Originally Posted by vividracing

There's a product sold at Home Depot and Lowes thats the exact same thing, but a lot cheaper. It's called Peel n Seal. I used it on a build, and it worked well.

Oh and use a heat gun to make it easier to work with if you plan on installing it while it's cold. Even in the summer it can help.

Stick with Dynamat Exterme or Rammat they don't smell like some of the construction material products.

Check out the "Cabin Noise" thread in "General Discussions" section. Tons of info in that thread.

El Jale · 12-10-2011, 08:20 PM

A bit late, but I used FatMat in my Old GST and it helped. Even though the material isn't as thick as DynaMat, it made a big difderence. Got 100sq ft for about 120 shipped.it's a cheaper option and you would have more material to work with.

+1 for the heat gun too.

12-01-2011, 12:55 PM	#1 (permalink)
Pelican170 Track Member Join Date: Jul 2010 Location: Sandy Hook, CT Posts: 972 Drives: Nissan 370z Nismo Rep Power: 16	Dynamat? Hey guys, This winter I want to put in some Dynamat to the trunk because i get some rattles that are going to drive me crazy! I see there are a few different types to get, any suggestions or will they all work the same? __________________ Fast Intentions CF Exhaust - Fast Intentions HFC's - HPS Tubes w/ AFE Dry Flow Filter's

12-01-2011, 01:51 PM	#5 (permalink)
Pelican170 Track Member Join Date: Jul 2010 Location: Sandy Hook, CT Posts: 972 Drives: Nissan 370z Nismo Rep Power: 16	Hmmnnn, thanks for the info. Im surprised nobody mentioned the Dynamat Superlite stuff. I was leaning towards that... __________________ Fast Intentions CF Exhaust - Fast Intentions HFC's - HPS Tubes w/ AFE Dry Flow Filter's

12-01-2011, 03:14 PM	#10 (permalink)
Pelican170 Track Member Join Date: Jul 2010 Location: Sandy Hook, CT Posts: 972 Drives: Nissan 370z Nismo Rep Power: 16	ok good stuff. thanks for all the info guys. __________________ Fast Intentions CF Exhaust - Fast Intentions HFC's - HPS Tubes w/ AFE Dry Flow Filter's

12-01-2011, 04:51 PM	#12 (permalink)
Pelican170 Track Member Join Date: Jul 2010 Location: Sandy Hook, CT Posts: 972 Drives: Nissan 370z Nismo Rep Power: 16	wanna send it my way? lol __________________ Fast Intentions CF Exhaust - Fast Intentions HFC's - HPS Tubes w/ AFE Dry Flow Filter's

12-01-2011, 07:38 PM	#13 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 38 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 39	There's a product sold at Home Depot and Lowes thats the exact same thing, but a lot cheaper. It's called Peel n Seal. I used it on a build, and it worked well. Oh and use a heat gun to make it easier to work with if you plan on installing it while it's cold. Even in the summer it can help. __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

12-01-2011, 01:29 PM	#2 (permalink)
nismo 1234 Track Member Join Date: May 2010 Location: Canada BC Posts: 501 Drives: 10 370z M6 40th Rep Power: 16	i have used extreme dynamat and rattle trap extreme. they both work well. but rattle trap extreme is thicker and better priced!

12-01-2011, 01:42 PM	#3 (permalink)
cheshirecat A True Z Fanatic Join Date: Jan 2009 Location: Florida Posts: 1,428 Drives: N54 135i Rep Power: 292	I prefer the regular extreme. Did my 350z hatch area and cut down on noise considerably.

12-01-2011, 01:50 PM	#4 (permalink)
nismonster Base Member Join Date: Jun 2011 Location: Marietta, GA Posts: 177 Drives: 09 NISMO #349 Rep Power: 14	I used 37.5 sq ft of RAAMmat BXT II, it only cost about 100$ shipped and it was enough to cover beneath all carpets and also full hatch area. I was quite liberal with it and went over certain areas twice, or else I probably would have had enough to do the doors also. It was a noticeable difference once installed!

12-01-2011, 01:56 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	there's a thread where i posted which dynamat i used. i cant remember but i bought 2 boxes which were for the doors (amazon) and worked out great for the trunk. btw, dont go cheap on the roller tool.

12-01-2011, 03:02 PM	#8 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	DEFINETLY get the roller tool. the ones with the hard rubber roller and metal/wooden handle is the one i use. dynamat is pretty thick stuff and if you have air bubbles the dampening performance drops considerably.

12-01-2011, 03:13 PM	#9 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,885 Drives: '09 370 & ‘14 Juke Rep Power: 27408	^+1 This is what I used. http://www.amazon.com/gp/product/B00...00_i00_details Roller: http://www.amazon.com/gp/product/B00...00_i00_details

12-01-2011, 03:40 PM	#11 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	^^ that's the exact roller i gotz.

12-10-2011, 08:20 PM	#15 (permalink)
El Jale Base Member Join Date: Nov 2011 Location: SoTexas Posts: 74 Drives: '12 370Z, '10 Genni Rep Power: 14	A bit late, but I used FatMat in my Old GST and it helped. Even though the material isn't as thick as DynaMat, it made a big difderence. Got 100sq ft for about 120 shipped.it's a cheaper option and you would have more material to work with. +1 for the heat gun too. __________________ *Pasteurized, Homogenized, Sterilized.... New and Improved.*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Use Dynamat or not	BobQ	Audio & Video	32	06-02-2015 02:01 PM
To Dynamat or Not	OldGuy	Intake/Exhaust	14	03-20-2011 10:21 PM
After Dynamat what's next?	Guard Dad	Audio & Video	7	11-02-2010 03:49 AM
dynamat does it work	sonic370	Audio & Video	3	09-16-2010 12:24 AM
how much dynamat?	Liquid_G	Audio & Video	12	09-15-2009 10:47 PM