![]() |
Anyplace to buy the oem clear headlight lens, or clean?
I'm really looking to buy the OEM headlight lens only...the outer shell. Its got a lot of sun damage that will not come out. I obviously don't want to spend the $800 to replace the whole headlight just for a dirty lens. I have taken it apart to paint the housing. If I take it apart is there somehow I can soak it in something for awhile to get it really clean? Is it even possible to just order the lens?
|
Have you looked into a headlight repair kit like Mothers? It does a great job of removing the faded look from the headlights.
http://www.automotivecandystore.com/...4%20lights.jpg |
Quote:
|
Sorry to hear but it sounds like your right to replace the lenses.
Have checked with Courtesy nissan to see if that could be ordered? If not replacement used lights would be the only alternative. Good Luck |
Quote:
|
My friend took his to a body shop and they came out almost brand new, You could not see a single smudge on the headlight. They use a power took to clean the mess out of them. you should try it out.
Hope it helps Javo |
Quote:
|
wet sand, followed by a sealant. It shouldn't come back if you seal it properly.
http://www.autogeek.net/3m-headlight...hannelid=FROOG |
I have the same problem. Could this be a defect in the material they made the lenses from? Did you happen to pose this possibility to the dealer? I have an 09 370Z with low mileage that I have taken good care of. When I'm not driving it it is in the garage.
|
wet sand and sealant worked wonders on my old car
|
Nissan won't sell the just the lenses, unfortunately...
Your best bet is as people have already mentioned; wet sand and seal using a high-quality sealer. |
I cleaned the headlights on my 7 year old Silvia S15 using a cutting polish, that seemed to work for me.
|
have a body shop wet sand it and then shoot clear coat on it... itll outlast majority of all the sealers ive tried :tup:
|
there is a seller on ebay selling 1 head light, 1 tail light and 1 turn signal pretty cheap.
|
Quote:
If you have ever tried to wet sand plastic, but it comes out hazy. If you clear a hazy piece of plastic, it's going to stay hazy... but really shiny. If you want it to be CLEAR, you have to polish and buff it. Which means the paint or clear you shoot on it isn't going to stick, so your only real option is to buy new ones, or keep wet sanding and buffing them often. Clear coating headlights doesn't work as well as you might think... I've been there. :shakes head: A good polish and a restoration kit that protects the exposed plastic is the best way to go. |
I would wetsand starting with about 600 grit and then progressively moving to 2000 grit. It will be hazy after the 2000, but then you hit with some rubbing compound and then polishing compound (I used Turtlewax brand). I did this on my 98 Prelude and it came out great. Also, I hear Opti-Coat 2.0 should provide permanent protection against UV damage.
I have headlight protection film on mine so I hope it doesn't happen to me in a few years! |
The other thing you could do is search for people that f'd up the housing trying to remove the headlights and just salvage their lens. I have seen a few posts in the past for headlights with broken mounting tabs.
|
Quote:
|
All times are GMT -5. The time now is 10:04 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2