Hood release puller help please!

Maila87 · 10-29-2011, 03:22 PM

Today, when released hood the lane popped out of the puller. Any tips how to get lane back? Wasted almost hour trying without success

kellyefields · 10-29-2011, 09:59 PM

you will need to remove the lower trim piece. It is held by two screws I think and then popout the port that you plug in a dignostic machine to along with the hose and the other sensor on the right side, you will know what I mean when you see it. then once you have it out you take the wire and with the panel turned sideways pull the lever a little and you will see how it will slide into the track. once it is back in the track reinstall the ports/hoses and screw it back in.

10-29-2011, 03:22 PM	#1 (permalink)
Maila87 Base Member Join Date: Apr 2011 Location: Prague Age: 37 Posts: 138 Drives: 370Z Rep Power: 14	Hood release puller help please! Today, when released hood the lane popped out of the puller. Any tips how to get lane back? Wasted almost hour trying without success __________________ -->2005-6 Nissan Micra 1,3i CVT 72PS Red MY 98 -->2006-8 Nissan Almera 1,5i N16 96PS Red -->2007-8 Skoda Fabia Combi 1,2HTP 3 cylinder 60PS Green -->2008-11 AUDI TT 2,0TFSI FWD S-tronic 200PS Red MY06 -->2011 Nissan 370Z manual White Pearl

10-29-2011, 09:59 PM	#2 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 48 Posts: 1,156 Drives: Supercharged Rep Power: 17	you will need to remove the lower trim piece. It is held by two screws I think and then popout the port that you plug in a dignostic machine to along with the hose and the other sensor on the right side, you will know what I mean when you see it. then once you have it out you take the wire and with the panel turned sideways pull the lever a little and you will see how it will slide into the track. once it is back in the track reinstall the ports/hoses and screw it back in. __________________ MY 2009 SC BUILD.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan 370z Raised Hood Kit / Hood Spacer Kit	Mak	Exterior & Interior	39	12-20-2020 11:24 AM
K&N Typhoon Release	Ct Chip	Intake/Exhaust	101	09-11-2010 02:09 PM
NJZCC Meet in Bridgewater (paintless dent puller on site): Sun. May 16th	Quidproquo	North East Region	10	05-17-2010 06:48 PM
pop rivet puller?	jmlenz	DIY Section (Do-It-Yourself)	6	11-30-2009 12:16 AM
For Immediate Release	AK@Performanc	Wheels & Tires	1	02-19-2009 02:56 PM