Got it washed today. Now here is the problem. brake lights and side markers come on in about a min when I leave my car. The car is off and
|
|
LinkBack | Thread Tools | Display Modes |
09-18-2011, 10:38 PM | #1 (permalink) |
Base Member
|
Something is wrong with my Z.
Got it washed today. Now here is the problem. brake lights and side markers come on in about a min when I leave my car. The car is off and the lights turns on by itself. My light switch is on the off position also. So I went to reset the battery to fix the problem. Now it causes more problems. The light still comes on in about a min. and my driver door window will open a crack bit when I open my door. Its suppose to prop back up when fully on up position. But it doesn't. When my window is fully down. The one click up will not prop the window back up. I have to hold the button up to fully close the window. I disconnected the battery and now my car is in the garage unlocked. WTF Nissan. Anyone has problems like this before? And if you do what can I do to fix it? Other than sending it back to Nissan.
Last edited by Crazy4Z; 09-18-2011 at 10:52 PM. |
09-18-2011, 10:51 PM | #2 (permalink) |
A True Z Fanatic
Join Date: Feb 2011
Location: Annapolis, MD
Posts: 2,237
Drives: Family Cars
Rep Power: 20 |
Not sure about your light problem but when you disconnected the battery the windows need to be reset for the auto functions to start working again.
Start the car up and hold & press window button down for 15 seconds and then up for 15 seconds.... window reset done.
__________________
BMW 340i Jeep Cherokee Trailhawk |
09-18-2011, 10:52 PM | #3 (permalink) |
Administrator
Join Date: May 2009
Location: Disneyland, Ca
Posts: 8,730
Drives: 🔰
Rep Power: 10 |
Try the window reset to fix the windows issue but I don't know what would be causing your lights to come on with your light switch in the off position.
WINDOWS NOT WORKING PROPERLY AFTER INSTALL If the windows do not close automatically If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Push the ignition switch to the ON position. 2. Close the door. 3. Open the window completely by operating the power window switch. 4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely. 5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. 6. Perform steps 2 through 5 above for other windows. |
09-18-2011, 10:59 PM | #5 (permalink) |
A True Z Fanatic
Join Date: Jul 2010
Location: Newport Beach
Posts: 3,900
Drives: 2010 370Z/Saab 900se
Rep Power: 432 |
What type of wash place was this?
__________________
-320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob |
09-19-2011, 04:39 AM | #7 (permalink) |
Base Member
|
So I found the problem. The Relay box and switch was wet. It finally dried out and the lights are in normal operations. But I had to uninstall my aftermarket intake. The G2 stillen Intake makes you relocate the relay box underneath the airbox cone. But I still dont get how it got all wet. This is pretty bad.
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TV Interview Gone Wrong | zmyride | The Lounge (Off Topic) | 8 | 11-07-2010 01:13 PM |
something wrong with tranny? | darthanakin23 | Nissan 370Z General Discussions | 4 | 09-08-2010 02:56 AM |
What's wrong with the 6MT? | WooZ | Nissan 370Z General Discussions | 40 | 08-29-2009 08:01 PM |
Is it so wrong... | FricFrac | The Lounge (Off Topic) | 4 | 06-03-2009 12:25 PM |
What is wrong with Audi?? | imnouser | Other Vehicles | 4 | 03-07-2009 01:21 PM |