370Z fog light

Ricardo2.0 · 08-27-2011, 02:55 PM

On my 09 i do have a plug next to the fog light with V-AC of (6). Any word on how to get this to work. do i need to purchase the light housing because i have no way to plg a light into the fog light currently on the car.

Any word on this?
IMG_0901.jpg

i have attached a pic of what it looks like the cable/plug for the light

Nick911sc · 08-27-2011, 03:05 PM

The stock fog light in the Z in the US is a dummy light. You need to purchase a new one. But since you already have all the wires run I'd just pick one up from Z1.

Ricardo2.0 · 08-27-2011, 03:29 PM

Quote:

Originally Posted by Nick911sc

The stock fog light in the Z in the US is a dummy light. You need to purchase a new one. But since you already have all the wires run I'd just pick one up from Z1.

who is Z1 i am new here sorry for the trouble...

Nick911sc · 08-27-2011, 03:33 PM

Hey no problem man

JDM Fairlady Z Reverse Fog Light

There you go.

There are a bunch of DIY on the forum about how to remove the dummy light.

Ricardo2.0 · 08-27-2011, 03:41 PM

Thanks got it.

Ricardo2.0 · 09-04-2011, 08:56 PM

I just got another question i have no switch next to the seats heaters switch. do i need a switch for the fog light or maybe this light will work with the brakes light or reverse light ???

Ricardo2.0 · 09-05-2011, 12:33 PM

anybody???

370Z JT · 09-05-2011, 01:46 PM

Tap the wire to the brake light or parking light. I tapped mine to the parking light. No switch needed.

gurneyeagle · 09-05-2011, 06:50 PM

Quote:

Originally Posted by Ricardo2.0

anybody???

Ricardo - go to the DIY section, and you will find a few threads on installing the fog light. Two specifically deal with using the factory harness you found. Utilizing the harness involves tapping into the wiring found in the passenger footwell.

Activating the Rear Fog lamp using (mostly) existing wiring

DIY: Rear Fog Light Wire Via BCM and Stock Wiring

As an alternative, you can simply wire the light directly into the factory harness found in the trunk.

The EVO-R light has two hot leads - one for flash, one for solid on. I plan on wiring the light so it flashes in reverse, and comes on solid when I hit the brakes. Take a look at this thread:

DIY: EVO-R Foglight Install

Dave took it a bit farther than I will be by installing an on/off switch, but his write-up is exceptional.

Good Luck!

SvR370z · 09-05-2011, 09:07 PM

Why Nissan just won't release a control
Stalk for this is far beyond me.
How hard could it be? I think someone
Said the Canadian stalk was right but
Cost alot.

gurneyeagle · 09-05-2011, 09:44 PM

Quote:

Originally Posted by 370Z JT

Tap the wire to the brake light or parking light. I tapped mine to the parking light. No switch needed.

Can you explain how you tapped into the wires? Everyone who has done a DIY, has assumed we all know how to do that properly. I'm clueless on that part.

One DIY used some type of clip to splice the wires together. That seems like a simpler method than cutting and soldering.

Thanks in advance.

XwChriswX · 09-05-2011, 09:56 PM

Just go to your local hardware shop (Home Depot, Lowes, Ace) They should have them. Just ask the clerk for "18 gauge wire taps" and they will show you. They're basically plastic clips with a metal blade in them. You put the current wire on one side, and your splice wire on the other, press the blade down onto them, and close the cap. Done! No shrink wrap needed, and no soldiering needed.

spearfish25 · 09-05-2011, 09:58 PM

The best wire taps I've found were at Radioshack. They have taps for telephone wire that work well with 22-24 AWG electrical wire.

Ricardo2.0 · 09-06-2011, 12:40 AM

Thanks for the post i got all info i need thanks thanks...

thanks gurneyeagle

gurneyeagle · 09-06-2011, 10:41 AM

Thanks spear and Chris!

I know that sounded like a stupid question, but it was the one thing that either wasn't detailed, or I had no experience with.

I appreciate your patience with a newby question.

08-27-2011, 02:55 PM	#1 (permalink)
Ricardo2.0 Base Member Join Date: Aug 2011 Location: Arizona Posts: 47 Drives: RED-09-370Z-SP-6MT Rep Power: 14	370Z fog light On my 09 i do have a plug next to the fog light with V-AC of (6). Any word on how to get this to work. do i need to purchase the light housing because i have no way to plg a light into the fog light currently on the car. Any word on this? IMG_0901.jpg i have attached a pic of what it looks like the cable/plug for the light

09-05-2011, 01:46 PM	#8 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	Tap the wire to the brake light or parking light. I tapped mine to the parking light. No switch needed. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

09-05-2011, 09:56 PM	#12 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	Just go to your local hardware shop (Home Depot, Lowes, Ace) They should have them. Just ask the clerk for "18 gauge wire taps" and they will show you. They're basically plastic clips with a metal blade in them. You put the current wire on one side, and your splice wire on the other, press the blade down onto them, and close the cap. Done! No shrink wrap needed, and no soldiering needed. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

09-05-2011, 09:58 PM	#13 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	The best wire taps I've found were at Radioshack. They have taps for telephone wire that work well with 22-24 AWG electrical wire. __________________ 2013 Cadillac V-Wagon, RIP Z

09-06-2011, 10:41 AM	#15 (permalink)
gurneyeagle A True Z Fanatic Join Date: Jul 2011 Location: Houston/Saint Augustine Posts: 2,681 Drives: '18 Audi TT RS Rep Power: 20215	Thanks spear and Chris! I know that sounded like a stupid question, but it was the one thing that either wasn't detailed, or I had no experience with. I appreciate your patience with a newby question. __________________ Waiting on the Z35! SOLD - 2011 Gun Metallic Touring 7AT w Sports Pkg & Nav, Nismo Bumper and Rims, RC Grille, RC Brake Ducts, H&R Spacers, Painted Door Hdls, GTR Start Button, Nav By-Pass, EVO R Fog Light, CF Ducktail, CF Interior Trim

08-27-2011, 03:05 PM	#2 (permalink)
Nick911sc A True Z Fanatic Join Date: Feb 2009 Location: Long Island, New York Posts: 1,698 Drives: 2010 Nissan GT-R Rep Power: 20	The stock fog light in the Z in the US is a dummy light. You need to purchase a new one. But since you already have all the wires run I'd just pick one up from Z1.

08-27-2011, 03:33 PM	#4 (permalink)
Nick911sc A True Z Fanatic Join Date: Feb 2009 Location: Long Island, New York Posts: 1,698 Drives: 2010 Nissan GT-R Rep Power: 20	Hey no problem man JDM Fairlady Z Reverse Fog Light There you go. There are a bunch of DIY on the forum about how to remove the dummy light.

08-27-2011, 03:41 PM	#5 (permalink)
Ricardo2.0 Base Member Join Date: Aug 2011 Location: Arizona Posts: 47 Drives: RED-09-370Z-SP-6MT Rep Power: 14	Thanks got it.

09-05-2011, 12:33 PM	#7 (permalink)
Ricardo2.0 Base Member Join Date: Aug 2011 Location: Arizona Posts: 47 Drives: RED-09-370Z-SP-6MT Rep Power: 14	anybody???

09-05-2011, 09:07 PM	#10 (permalink)
SvR370z Base Member Join Date: Dec 2008 Location: Tn Posts: 96 Drives: PW Touring 370z Rep Power: 16	Why Nissan just won't release a control Stalk for this is far beyond me. How hard could it be? I think someone Said the Canadian stalk was right but Cost alot.

09-06-2011, 12:40 AM	#14 (permalink)
Ricardo2.0 Base Member Join Date: Aug 2011 Location: Arizona Posts: 47 Drives: RED-09-370Z-SP-6MT Rep Power: 14	Thanks for the post i got all info i need thanks thanks... thanks gurneyeagle

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z1 Motorsports JDM Fog Light Light Installation Kit (Starting @ $18.00 w/ out Light)	Dustin@Z1	Body Interior/Exterior	4	11-04-2016 06:16 AM
Anyone installed the rear fog light as a brake light on a roadster?	Lee123	DIY Section (Do-It-Yourself)	4	05-01-2010 08:53 PM
Local 370z needed for smoked tail light and head light fitting	dantegts	Southern California Region	11	04-07-2010 08:55 PM
Question about fog light for the guys with the factory fog light from Canada/Europe	Jowe	Exterior & Interior	28	09-27-2009 01:50 PM
smoked tail light and head light volunteer covina, ca area	dantegts	Exterior & Interior	0	08-29-2009 01:33 PM