Tomei Duracon

Rulez · 02-19-2014, 11:54 AM

Thread resurrection.

I bought the 90mm knob from Z1 but I am having fitment issues. The knob will not reach the threads on the shifter when I try and use the finisher that Z1 supplied with it, and even when I use it without the finisher, the knob only grabs one or two threads on the shifter before it bottoms out. As a result, I stripped the first couple threads in the knob. Am I doing something wrong here?

Here are some pics for reference:

With finisher, will not reach the threads:

Without finisher, bottoms out on the wide black part of the shifter and only grabs one or two threads:

Just the shifter threads, for reference:

02-19-2014, 11:54 AM	#7 (permalink)
Rulez Base Member Join Date: Oct 2013 Location: Orlando, FL Posts: 42 Drives: 2010 370Z Sport Rep Power: 12	Thread resurrection. I bought the 90mm knob from Z1 but I am having fitment issues. The knob will not reach the threads on the shifter when I try and use the finisher that Z1 supplied with it, and even when I use it without the finisher, the knob only grabs one or two threads on the shifter before it bottoms out. As a result, I stripped the first couple threads in the knob. Am I doing something wrong here? Here are some pics for reference: With finisher, will not reach the threads: Without finisher, bottoms out on the wide black part of the shifter and only grabs one or two threads: Just the shifter threads, for reference: Last edited by Rulez; 02-19-2014 at 11:57 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Would you like to see Tomei make a titanium exhaust for the 370z?	vividracing	Intake/Exhaust	28	10-28-2013 12:46 AM
Forged Performance - Evo X MR get's some goodies! AMS, Tomei, Willall,	Tray@Forged	Other Vehicles	0	02-11-2011 10:06 AM