This Plasti Dip product is Awesome!

NismoZ70

I use toothpicks when pulling the plasti dip within an emblem. Don't want to use something too sharp and scratch the paint.

carlitos_370z

well guys!!! here are few pics of my Z new look


20131022_172738 by carlitos_sti, on Flickr


20131022_133255 by carlitos_sti, on Flickr

sorry for the crappy cellphone pics, and my car dont have the gas door because i leave the front lip on the paint shop to fix some details when i install the lip im going to take better pics....

NickTurnon

That looks great carlitos!

__________________
2009 Brilliant Silver BASE 7AT | TEIN S-Tech Springs | K&N Drop Ins & z1 Maf Tubes | AAM S-Line Short Tails | 5% Tint | 20MM Spacers | Sport Spoiler NickTurnon's 370z Build

carlitos_370z

Thanks a lot bro!!! BTW thanks for your help too i can wait to install the lip again to use my car hahhaha!!!

osirus

Usually, since this was from what i can tell first started on the ClubLexus forums, but has been around for some time, I have a IS250 as well as a new z34, but i have done this numerous times.

1. Spray all coats on 4-5 (total), about 15 min apart in each pass. Ensure that you stay approx. 6in to 8in off the surface
2. Once finished, use finger to peel large area surface extras off first.

3. For minute and small crevises, use a dull pointed plastic tool - Plastic Needles from Walmart Sewing and Crafts section I found work perfect. Twist the point of your tool (plastic is best for this process) till the Excess twirls around the tip, using tweezers or needle nose pliers, grab excess and gently pull away from surface. VOILA!

PS You do not EVER want to use anything Metal or Sharp in this case on this product when removing from small areas....this will result in scratches and deep damage to the body panel in which it has been applied
if you have any questions, let me know.

DufDaddy

I've never used a knife. If you application is right you shouldn't have to. Something pointy like a toothpick does work real well for small spaces.


Great job Carlito! Soon enough you will be doing a full dip

carlitos_370z

Thanks a lot bro!!! i have that in mind let see what happend

Bananaz

Has anyone tried dipping in 30-40 degree weather? I really wanna do the emblems and handles but don't think it'll come out right.

Sent from my SCH-I545 using Tapatalk

__________________

osirus

I just did a Dip on some emblems for an STI and a new Focus ST of a friend of mine and did it 25 Deg weather. LOL Cold but it worked. Just be patient and do the needed coats and it works!

Bananaz

Well..going to pep boys later and picking up a few cans

Sent from my SCH-I545 using Tapatalk

__________________

Limeybastard

I love the plasti dip on the fangs, however I have come to the conclusion it wont look as good on the 2013 > Zees.

The fang on the pre 2013 looks like one unit once plasti dipped, it wont on the later models.

SterlingDrive

Even still, I did my '14 and like the look better than OEM, subtle but nice change even on a MB...


Sterling

Attached Images

Z clay barred 003.jpg (516.5 KB, 74 views)

__________________

'14 MB Tour Sprt Persim. Nav/NISMO Exhaust Berk HFC's/HPS MAFs & K&N/H&R 20 25mm Spacers/Clear Bra & Tints/GT-R lens/LatheWerkes Knob

Limeybastard

Looking good, and yes you right it does look better than stock.

Do you think I would get away with just plasti dipping the painted area of the lower bumper or should I do the whole black area?

SterlingDrive

I did less first, but after a couple of days went back and coated the lower lip and the grill and all. of course the beauty of dip is you can pull it off if you do not like it.

Another pic.

Sterling

Attached Images

Z clay barred 004.jpg (610.2 KB, 69 views)

__________________

'14 MB Tour Sprt Persim. Nav/NISMO Exhaust Berk HFC's/HPS MAFs & K&N/H&R 20 25mm Spacers/Clear Bra & Tints/GT-R lens/LatheWerkes Knob

Limeybastard

Nice, so basically you figured it would look better if all the blacks were same match texture as the plasti dip? I think I will do the lower colored area first and see how it turns out, no doubt will end up doing what you did in the end.

I have some mat black vinyl, wondering if this would also work? I guess the pain of applying it bubble / crease free would be PITA.