This Plasti Dip product is Awesome!

b1adesofcha0s · 06-27-2012, 10:08 PM

Quote:

Originally Posted by koffeegy

Try WD40 to remove plastidip.

I just used goo gone and got it all off, but thanks

RC24 · 07-03-2012, 12:06 AM

twinturbonet · 07-03-2012, 08:43 AM

Quote:

Originally Posted by b1adesofcha0s

I just used goo gone and got it all off, but thanks

Same here. Good stuff.

ericzmyers · 07-03-2012, 10:43 AM

Quote:

Originally Posted by b1adesofcha0s

When I was pulling the plasti dip off my wheels, some of the parts that had gotten really hot took some of the wheel's original finish off with it. I'll take a pic of it tomorrow to show you guys what I'm talking about. This might have to do with my new brake set up though since it seems to get much hotter than the stock setup. I installed Carbotech XP8's a month ago and also took my car on a track session. Guess some parts of my wheels got a bit too hot at some point there.

check out the thinner solution on dipyourcar.com. it will probably take it off. $7

b1adesofcha0s · 07-03-2012, 10:56 AM

Quote:

Originally Posted by ericzmyers

check out the thinner solution on dipyourcar.com. it will probably take it off. $7

Look at my last post, I already got it off using goo gone that I picked up from Walmart for $5.

NickTurnon · 07-03-2012, 11:46 AM

Has anyone sprayed the license plate area?

I think that will be my next area to spray down.. Tape off the exterior of the license plate area and get the back portion blacked out.

I want it to be sort of like this guys, but non CF & a little smaller
Evo R front lip and license plate background

lemon-fresh · 07-03-2012, 03:02 PM

I'm seriously considering blacking out my front fangs. Looks like taping that area off is gonna be a real bitch, any tips?

NickTurnon · 07-03-2012, 03:03 PM

Yeah, go to Home Depot or Lowes and buy their $2 plastic wrap. You can just use a little pocket knife and cut out a hole in the wrap to spray the fangs..

lemon-fresh · 07-03-2012, 03:08 PM

wicked! Glad I asked.

lemon-fresh · 07-03-2012, 03:15 PM

Something like this?

20 in. x 1000 ft. Stretch Film-5005002 at The Home Depot

Or this?

http://www.homedepot.com/h_d1/N-5yc1...&storeId=10051

NickTurnon · 07-03-2012, 03:44 PM

Neither- not that intense.

Just walk into a Lowes or Home Depot- Go to the Paint/Tape section and there should be a little case on the end of the isle that has really cheap plastic wrap. In a little cheap bag. Its just for painting a room and laying it down on the ground

$2 TOPS. I think Home Depot is $1.98.

It fits the whole front or whole back of any vehicle

b1adesofcha0s · 07-03-2012, 03:49 PM

Quote:

Originally Posted by lemon-fresh

Something like this?

20 in. x 1000 ft. Stretch Film-5005002 at The Home Depot

Or this?

5 in. x 1000 ft. Stretch Wrap-5005001 at The Home Depot

Like this

9 ft. x 12 ft. .7mil drop cloth-79121C at The Home Depot

lemon-fresh · 07-03-2012, 03:55 PM

After cutting out the hole for the fangs I would still have to tape the opening down right? Or will the plastic adhere to the bumper without taping?

NickTurnon · 07-03-2012, 11:01 PM

Quote:

Originally Posted by lemon-fresh

After cutting out the hole for the fangs I would still have to tape the opening down right? Or will the plastic adhere to the bumper without taping?

You still have to tape off the edges, but its much less work then taping the whole car or pieces of paper together

ericzmyers · 07-04-2012, 02:48 PM

Quote:

Originally Posted by b1adesofcha0s

Look at my last post, I already got it off using goo gone that I picked up from Walmart for $5.

the thinner also has more application than just removal...... but I'm sure you already knew that too.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plasti-dip'd front fangs and rear exhaust panel	NickTurnon	Exterior & Interior	22	08-30-2011 05:14 PM
Plasti-dipped A-Pillars	SeeyaBud86	Exterior & Interior	60	08-16-2011 03:43 PM
Plasti-Dippers!!	delusional	Nissan 370Z Photos / Spyshots / Video / Media Gallery	7	08-06-2011 09:25 AM
Plasti dipped the grille	Fezzik	Other Vehicles	16	05-02-2011 04:43 PM
Side trim is plasti dipped on the Red Vert	cereal2k	Other Vehicles	3	02-01-2011 11:11 PM

07-03-2012, 12:06 AM	#692 (permalink)
RC24 Base Member Join Date: Jun 2012 Location: Irvine, CA Posts: 35 Drives: '12 370Z PW M6 Rep Power: 13

07-03-2012, 11:46 AM	#696 (permalink)
NickTurnon A True Z Fanatic Join Date: Jul 2011 Location: Scottsdale Age: 34 Posts: 1,636 Drives: 09 BS 7AT 370z Rep Power: 18	Has anyone sprayed the license plate area? I think that will be my next area to spray down.. Tape off the exterior of the license plate area and get the back portion blacked out. I want it to be sort of like this guys, but non CF & a little smaller Evo R front lip and license plate background

07-03-2012, 03:02 PM	#697 (permalink)
lemon-fresh Enthusiast Member Join Date: Mar 2012 Location: Calgary Age: 40 Posts: 471 Drives: 09 370z Rep Power: 13	I'm seriously considering blacking out my front fangs. Looks like taping that area off is gonna be a real bitch, any tips?

07-03-2012, 03:03 PM	#698 (permalink)
NickTurnon A True Z Fanatic Join Date: Jul 2011 Location: Scottsdale Age: 34 Posts: 1,636 Drives: 09 BS 7AT 370z Rep Power: 18	Yeah, go to Home Depot or Lowes and buy their $2 plastic wrap. You can just use a little pocket knife and cut out a hole in the wrap to spray the fangs..

07-03-2012, 03:08 PM	#699 (permalink)
lemon-fresh Enthusiast Member Join Date: Mar 2012 Location: Calgary Age: 40 Posts: 471 Drives: 09 370z Rep Power: 13	wicked! Glad I asked.

07-03-2012, 03:15 PM	#700 (permalink)
lemon-fresh Enthusiast Member Join Date: Mar 2012 Location: Calgary Age: 40 Posts: 471 Drives: 09 370z Rep Power: 13	Something like this? 20 in. x 1000 ft. Stretch Film-5005002 at The Home Depot Or this? http://www.homedepot.com/h_d1/N-5yc1...&storeId=10051

07-03-2012, 03:44 PM	#701 (permalink)
NickTurnon A True Z Fanatic Join Date: Jul 2011 Location: Scottsdale Age: 34 Posts: 1,636 Drives: 09 BS 7AT 370z Rep Power: 18	Neither- not that intense. Just walk into a Lowes or Home Depot- Go to the Paint/Tape section and there should be a little case on the end of the isle that has really cheap plastic wrap. In a little cheap bag. Its just for painting a room and laying it down on the ground $2 TOPS. I think Home Depot is $1.98. It fits the whole front or whole back of any vehicle

07-03-2012, 03:55 PM	#703 (permalink)
lemon-fresh Enthusiast Member Join Date: Mar 2012 Location: Calgary Age: 40 Posts: 471 Drives: 09 370z Rep Power: 13	After cutting out the hole for the fangs I would still have to tape the opening down right? Or will the plastic adhere to the bumper without taping?