This Plasti Dip product is Awesome!

robtrink · 03-22-2012, 04:35 PM

Worried about doing the front emblem on my Z. The front bumper has a clear bra on it and I have not found anyone that says if pastidip stains or alters the clear bra in any way.

Obviously, I will be peeling it off the clear bra but I do not want it to leave a stain.

koffeegy · 03-22-2012, 04:55 PM

Quote:

Originally Posted by robtrink

Worried about doing the front emblem on my Z. The front bumper has a clear bra on it and I have not found anyone that says if pastidip stains or alters the clear bra in any way.

Obviously, I will be peeling it off the clear bra but I do not want it to leave a stain.

Go to where you had the clear bra installed and see if they can give you a scrap to try out the Plasti-Dip on. I'm sure if you explain what you want to do they will understand.

b1adesofcha0s · 03-22-2012, 04:55 PM

Quote:

Originally Posted by robtrink

Worried about doing the front emblem on my Z. The front bumper has a clear bra on it and I have not found anyone that says if pastidip stains or alters the clear bra in any way.

Obviously, I will be peeling it off the clear bra but I do not want it to leave a stain.

You could try putting some painter's tape on the clear bra before you start spraying so that none of it goes on the clear bra itself.

Alchemy · 03-22-2012, 05:01 PM

Personally I dont see why it would mess up clear bra. Its just spray rubber. Im not positive but I would assume you would be fine.

Burriss03 · 03-22-2012, 05:05 PM

Quote:

Originally Posted by akaaronkatz

I had it on my door handles for 3 months. I had put it on them before and had taken it off after a week which was no problem but when it was left on for 3 months it was incredibley difficult to remove. It did not come off easily, it broke off at the edges which caused me to spend a couple of hours scrubbing it off in tight spots and I'm probably going to have to take the handles off this weekend to get into some of the small cracks/spaces. My suggestion if you want to make your door handles black, just spend the extra money and have a professional paint/powercoat them.

Did it leave any kind of residue or fogginess when u took it off after 3months?or was it just hard to get off?

robtrink · 03-23-2012, 08:37 AM

Thanks for the helpful information. I taped off most of the clear bra and the front hamburger came out good. There are little pieces of black plastic that got caught on the edge of the clear bra but for the most part I was able to get it all out.

Thanks again!

b1adesofcha0s · 03-23-2012, 08:49 AM

Thinking about doing my door handles and emblems either tonight or sometime this weekend. For those of you who have plasti dipped the door handles, did you take them off the car or just spray them while they were still on the car?

haggomyeggo · 03-23-2012, 09:50 AM

Quote:

Originally Posted by b1adesofcha0s

Thinking about doing my door handles and emblems either tonight or sometime this weekend. For those of you who have plasti dipped the door handles, did you take them off the car or just spray them while they were still on the car?

I'm wondering this too.

TonyBPD · 03-23-2012, 01:23 PM

Somewhere there is pics on this. Guys have left them on the car and just taped everything off.

b1adesofcha0s · 03-23-2012, 01:38 PM

Quote:

Originally Posted by TonyBPD

Somewhere there is pics on this. Guys have left them on the car and just taped everything off.

Yeah I saw that when looking back in the thread and that's what I'm going to do. Going to do them in gunmetal like the wheels, but I'm gonna try putting the glossifier on top to give it a more glossy finish and hopefully a bit smoother texture. The plan is for 4 coats of black, 3 coats of silver metallizer, and then 2-3 coats of the glossifier.

Burriss03 · 03-24-2012, 02:49 AM

Did my front and rear emblems...not sure if im gonna keep it on for a long time or not tho

darionlear · 03-24-2012, 08:55 AM

Door handle prepped for procedure!

happytheman · 03-24-2012, 12:03 PM

Whoa!

Nice prep job!

CCastro · 03-24-2012, 01:24 PM

www.plastidipyourcar.com

darionlear · 03-24-2012, 01:32 PM

Quote:

Originally Posted by happytheman

Whoa!

Nice prep job!

Haha... thanks... I never have over spray issues

03-22-2012, 05:01 PM	#499 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 44 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	Personally I dont see why it would mess up clear bra. Its just spray rubber. Im not positive but I would assume you would be fine. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

03-23-2012, 08:49 AM	#502 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	Thinking about doing my door handles and emblems either tonight or sometime this weekend. For those of you who have plasti dipped the door handles, did you take them off the car or just spray them while they were still on the car? __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

03-23-2012, 01:23 PM	#504 (permalink)
TonyBPD Track Member Join Date: May 2009 Location: South Jersey Posts: 614 Drives: 2012 VW Golf R Rep Power: 17	Somewhere there is pics on this. Guys have left them on the car and just taped everything off. __________________ Fast Intentions-Stillen-Avant Garde-UpRev-319hp/265tq- Gone but will never be forgotten

03-24-2012, 12:03 PM	#508 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Whoa! Nice prep job! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plasti-dip'd front fangs and rear exhaust panel	NickTurnon	Exterior & Interior	22	08-30-2011 05:14 PM
Plasti-dipped A-Pillars	SeeyaBud86	Exterior & Interior	60	08-16-2011 03:43 PM
Plasti-Dippers!!	delusional	Nissan 370Z Photos / Spyshots / Video / Media Gallery	7	08-06-2011 09:25 AM
Plasti dipped the grille	Fezzik	Other Vehicles	16	05-02-2011 04:43 PM
Side trim is plasti dipped on the Red Vert	cereal2k	Other Vehicles	3	02-01-2011 11:11 PM

03-22-2012, 04:35 PM	#496 (permalink)
robtrink Base Member Join Date: Apr 2009 Location: Indiana Posts: 68 Drives: 370Z Rep Power: 16	Worried about doing the front emblem on my Z. The front bumper has a clear bra on it and I have not found anyone that says if pastidip stains or alters the clear bra in any way. Obviously, I will be peeling it off the clear bra but I do not want it to leave a stain.

03-23-2012, 08:37 AM	#501 (permalink)
robtrink Base Member Join Date: Apr 2009 Location: Indiana Posts: 68 Drives: 370Z Rep Power: 16	Thanks for the helpful information. I taped off most of the clear bra and the front hamburger came out good. There are little pieces of black plastic that got caught on the edge of the clear bra but for the most part I was able to get it all out. Thanks again!

03-24-2012, 08:55 AM	#507 (permalink)
darionlear Enthusiast Member Join Date: Nov 2011 Location: el paso Posts: 418 Drives: 370Z Rep Power: 14	Door handle prepped for procedure!

03-24-2012, 01:24 PM	#509 (permalink)
CCastro Enthusiast Member Join Date: Sep 2010 Location: SF Posts: 300 Drives: 10 Nismo MB Rep Power: 15	www.plastidipyourcar.com