This Plasti Dip product is Awesome!

b1adesofcha0s · 03-08-2012, 05:50 PM

Has anyone here used the metallizer yet? Trying to figure out if it's like silver color with metallic flakes or if it goes on clear with metallic flakes in it. I want to use it with the gunmetal to give it a metallic finish, but if it's silver in color than it will cover up the gun metal.

koffeegy · 03-08-2012, 05:54 PM

Quote:

Originally Posted by Gauge

I meant no offense. I'm a OCD kinda guy. Even the smallest infraction would drive me nuts.

I was actually thinking about making a clay mold to push into the nissan emblem. that way I spray everything one color, put the mold in and peel around it. Then leave the mold in and spray it all again. This should in theory give the perfect cut. Making the clay mold would be tough though. Might have to ask my wife for help on it.

no offense taken.

96bigbody · 03-09-2012, 06:31 AM

Quote:

Originally Posted by b1adesofcha0s

Has anyone here used the metallizer yet? Trying to figure out if it's like silver color with metallic flakes or if it goes on clear with metallic flakes in it. I want to use it with the gunmetal to give it a metallic finish, but if it's silver in color than it will cover up the gun metal.

You could just get the black plasti and spray whatever color you want over it.

FricFrac · 03-09-2012, 11:02 PM

Quote:

Originally Posted by Three7D

^^^^Whoa I think u went a lil over board with that masking job, jus to be doing that side emblem! Jk man it came out really well.

Side note to those interested in doing their handles it holds up extremly well rain or shine. I was hesitant about doing the handles also but I'm glad I went ahead and did it. My car lives outside for the time being, jus be sure to clean and prep them well I used rubbing alcohol with q-tips. Make sure u spray the inside where your fingers grab otherwise eventually it will start to peel off inside. But that's to be expected it's a $5 dollar mod, hope this helps!

Just a FYI if you don't want to get some of the better paint prep solevents there are better common solevents than isopropanol - methanol will leave less residue than isopropanol. Ethanol is the best of the alcohols - the use it in our calibration lab where they can't have any residue on the equipment under test in the physical properties lab.

Three7D · 03-10-2012, 01:47 AM

Quote:

Originally Posted by FricFrac

Just a FYI if you don't want to get some of the better paint prep solevents there are better common solevents than isopropanol - methanol will leave less residue than isopropanol. Ethanol is the best of the alcohols - the use it in our calibration lab where they can't have any residue on the equipment under test in the physical properties lab.

^thanks man next time I spray my handles I will def look into those.

b1adesofcha0s · 03-10-2012, 03:12 PM

So this is what I want to try with my wheels

sixpax · 03-10-2012, 03:27 PM

Quote:

Originally Posted by b1adesofcha0s

So this is what I want to try with my wheels

...yeah I watched that the other day. Fonzie whipped up some more dip godliness for sure. I think they turned out awesome.

b1adesofcha0s · 03-10-2012, 03:31 PM

Quote:

Originally Posted by sixpax

...yeah I watched that the other day. Fonzie whipped up some more dip godliness for sure. I think they turned out awesome.

Just ordered the metalizer wheel kit from their website. Going to do my wheels in that gunmetal (black+ silver metalizer) color and then do my roof gloss black.

SPOHN · 03-10-2012, 03:40 PM

Oh yea. I'm going to do my FJ in this.

My_third_Z · 03-10-2012, 03:51 PM

I just ordered three cans of the glossifier. I'm going to try it on my roof for that glossy black look.

wilsonp · 03-10-2012, 10:08 PM

Maybe you could try taking a photo of the emblem, printing it to scale and the cutting a mask out of it - so you'd have the perfect guide.

I like the result and would probably try if I didn't have a black car

Dembflyr · 03-15-2012, 12:14 PM

I need a little help with blacking out my fangs. I did the rear valance yesterday and it came out awesome. I put it on in a thick coat and while it was wet I pulled the tape and it left a crisp line.
Now for the front I tried the same but when I pulled the tape it had dried enough that it pulled some plasti dip off with it. Now I have to clean it off and start all over again.

I am looking for some tips for doing the fangs.

Should I just put three thin coats, let it dry fully and use a new razor blade to lightly cut the plasti dip?
Or is there a better way?

Thanks

cjeezy · 03-17-2012, 10:15 AM

About to try this stuff on my emblems today now that the weather is nice...As pathetic as it may sound, I'm scared to death lol! Even though I've read all the posts and watched the DIY video there's just something about spraying black paint on my white car thats a bit nerve-racking! Ha!

nmjaxx9 · 03-17-2012, 10:20 AM

Quote:

Originally Posted by cjeezy

About to try this stuff on my emblems today now that the weather is nice...As pathetic as it may sound, I'm scared to death lol! Even though I've read all the posts and watched the DIY video there's just something about spraying black paint on my white car thats a bit nerve-racking! Ha!

Just make sure you mask generously and you should be fine.

cjeezy · 03-17-2012, 10:42 AM

Quote:

Originally Posted by nmjaxx9

Just make sure you mask generously and you should be fine.

No turning back now. Just sprayed first coat. I'll post some pics once I'm done

03-08-2012, 05:50 PM	#436 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	Has anyone here used the metallizer yet? Trying to figure out if it's like silver color with metallic flakes or if it goes on clear with metallic flakes in it. I want to use it with the gunmetal to give it a metallic finish, but if it's silver in color than it will cover up the gun metal. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

03-10-2012, 03:12 PM	#441 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	So this is what I want to try with my wheels __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

03-10-2012, 03:40 PM	#444 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Oh yea. I'm going to do my FJ in this. __________________

03-10-2012, 10:08 PM	#446 (permalink)
wilsonp A True Z Fanatic Join Date: Jul 2010 Location: Virginia Posts: 1,134 Drives: 2009 Touring Sp Nav Rep Power: 17	Maybe you could try taking a photo of the emblem, printing it to scale and the cutting a mask out of it - so you'd have the perfect guide. I like the result and would probably try if I didn't have a black car __________________ 2014 Cayman S PDK Sport Chrono White/Black Was 2009 370Z Touring Sport+Nav 7AT Metallic Black/Persimmon Was 1991 NSX Auto Black/Black

03-15-2012, 12:14 PM	#447 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 16	I need a little help with blacking out my fangs. I did the rear valance yesterday and it came out awesome. I put it on in a thick coat and while it was wet I pulled the tape and it left a crisp line. Now for the front I tried the same but when I pulled the tape it had dried enough that it pulled some plasti dip off with it. Now I have to clean it off and start all over again. I am looking for some tips for doing the fangs. Should I just put three thin coats, let it dry fully and use a new razor blade to lightly cut the plasti dip? Or is there a better way? Thanks __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

03-10-2012, 03:51 PM	#445 (permalink)
My_third_Z Enthusiast Member Join Date: Feb 2011 Location: Charleston,SC Posts: 312 Drives: Blue 09 370z Rep Power: 14	I just ordered three cans of the glossifier. I'm going to try it on my roof for that glossy black look.

03-17-2012, 10:15 AM	#448 (permalink)
cjeezy Base Member Join Date: Mar 2011 Location: USA Posts: 131 Drives: 370Z Rep Power: 14	About to try this stuff on my emblems today now that the weather is nice...As pathetic as it may sound, I'm scared to death lol! Even though I've read all the posts and watched the DIY video there's just something about spraying black paint on my white car thats a bit nerve-racking! Ha!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plasti-dip'd front fangs and rear exhaust panel	NickTurnon	Exterior & Interior	22	08-30-2011 05:14 PM
Plasti-dipped A-Pillars	SeeyaBud86	Exterior & Interior	60	08-16-2011 03:43 PM
Plasti-Dippers!!	delusional	Nissan 370Z Photos / Spyshots / Video / Media Gallery	7	08-06-2011 09:25 AM
Plasti dipped the grille	Fezzik	Other Vehicles	16	05-02-2011 04:43 PM
Side trim is plasti dipped on the Red Vert	cereal2k	Other Vehicles	3	02-01-2011 11:11 PM