This Plasti Dip product is Awesome!

TongMan · 01-18-2012, 04:54 PM

Quote:

Originally Posted by bjblackout

Guys that did your wheels did you also do the inside of the wheel. In another words did you do the inside edge of the wheel (where wheel weights go)also or just the outside area you see when just looking at wheel straight on.

I did not spray the inner wheel. No need to unless you want to cover every surface area of the wheel. Plus, it's less work to peel it back off when you don't want the plasti dip anymore. Check my pictures on the first post.

darionlear · 01-18-2012, 05:00 PM

Quote:

Originally Posted by TongMan

I did not spray the inner wheel. No need to unless you want to cover every surface area of the wheel. Plus, it's less work to peel it back off when you don't want the plasti dip anymore. Check my pictures on the first post.

Saw them... but he was asking for how the sport rims looked tong...

Sent from my DROID RAZR using Tapatalk

TongMan · 01-18-2012, 05:12 PM

Oh..gotcha.

dozerdc · 03-03-2012, 05:41 PM

Quote:

Originally Posted by Skeeterbop

Well, I can't find video (might not have taken it, i can't remember) but here is a pic I took of said door handle. We masked it off using tape and some newspapers to help reduce over spray (any overspray is easily wiped off).

Sorry for the late question here, but how has that held up to daily use? Any sense that it's coming off given the handling of it?

darionlear · 03-04-2012, 12:02 AM

Nope... holds up well. Rain or wind....

Flushnismo · 03-05-2012, 08:31 PM

To anyone that has painted their door handles, how did you get the inside part? And does your button stick now? And has anyone tried to remove plastidip from handles yet?

SPOHN · 03-05-2012, 08:44 PM

Quote:

Originally Posted by Flushnismo

To anyone that has painted their door handles, how did you get the inside part? And does your button stick now? And has anyone tried to remove plastidip from handles yet?

Just spray in there but make sure you get it well. It seems I had to spray more in the area though. Also the button shouldn't stick. If I remember right it doesn't fill in that portion. If it does after ever coat take a tooth pick and trace that area when it's wet.

koffeegy · 03-05-2012, 08:46 PM

Quote:

Originally Posted by Flushnismo

To anyone that has painted their door handles, how did you get the inside part? And does your button stick now? And has anyone tried to remove plastidip from handles yet?

I really couldn't get into the handle all that good. Buttons don't stick at all. Love the look!!

Flushnismo · 03-05-2012, 10:09 PM

Quote:

Originally Posted by SPOHN

Just spray in there but make sure you get it well. It seems I had to spray more in the area though. Also the button shouldn't stick. If I remember right it doesn't fill in that portion. If it does after ever coat take a tooth pick and trace that area when it's wet.

Quote:

Originally Posted by koffeegy

I really couldn't get into the handle all that good. Buttons don't stick at all. Love the look!!

Thanks guys. I think I'm going to do this.

nmjaxx9 · 03-05-2012, 10:13 PM

Yes, I am going to do this as well, so Flush are you expecting the door handles to hold up after usage of opening and closing?

Flushnismo · 03-05-2012, 10:15 PM

Quote:

Originally Posted by nmjaxx9

Yes, I am going to do this as well, so Flush are you expecting the door handles to hold up after usage of opening and closing?

I hope so..

nmjaxx9 · 03-05-2012, 10:20 PM

Yeah thats my main concern, I don't want it to start peeling and look awful, I mean I could just peel it all off...but eh. I don't think I want to put in the effort if I know it won't last, may just stick to doing the emblems.

Vbp6US · 03-06-2012, 03:44 AM

There's going to be a lot of funky Zs in a few years roaming around with peeling handles and rims.

Then the masses that don't understand will be like wtf.

nmjaxx9 · 03-06-2012, 11:54 AM

Yeah decided to stick with just doing the emblems for now, I think ill wait on the handlebars, maybe get them professionally done later.

Dallaz · 03-07-2012, 06:34 PM

Hey Guys PM zentropy. His handles are PLASTI-dipped and are holding up pretty well. The inside will start to peel after a while, but that should be obvious.

We just did our camaro's side emblems which are waaay more complex than the Nissan burgers yet it worked perfectly. Peeled off around the camaro in one piece! As for my handles, which I spray painted with Krylon fusion, my passenger button sticks but still works. The drivers side is perfect.

I think it's just a matter of how much build up is around the buttons when your done. And as for painting the entire area. I had the handle propped open using a small screw to get the area you don't see unless your pulling the handle to open it which worked perfectly.

The one thing I learned about this stuff is that it's not going to damage anything (paint) or you be unable to get it off if you dont want it on. We had to wipe off some overspray from the hood between a couple of the coats when it was windy and it just comes right off after hardening.

We did 4 coats 10-15 minutes apart even though it says wait an hour between them. Then we waited overnight to peel off the rectangle from the camaro just to be on the safe side. It says wait 4 hours per coat to dry completely but I think one hour would have been enough. There's no risk

03-05-2012, 08:31 PM	#411 (permalink)
Flushnismo A True Z Fanatic Join Date: Dec 2010 Location: Amarillo, TX Posts: 1,041 Drives: 2010 Boosted 40th Rep Power: 16	To anyone that has painted their door handles, how did you get the inside part? And does your button stick now? And has anyone tried to remove plastidip from handles yet? __________________ AeroJacket l BC Racing l B&M l K&N l EVO-R l TWM Performance l Tanabe l AAM l Drop Engineering l Zenclosure

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plasti-dip'd front fangs and rear exhaust panel	NickTurnon	Exterior & Interior	22	08-30-2011 05:14 PM
Plasti-dipped A-Pillars	SeeyaBud86	Exterior & Interior	60	08-16-2011 03:43 PM
Plasti-Dippers!!	delusional	Nissan 370Z Photos / Spyshots / Video / Media Gallery	7	08-06-2011 09:25 AM
Plasti dipped the grille	Fezzik	Other Vehicles	16	05-02-2011 04:43 PM
Side trim is plasti dipped on the Red Vert	cereal2k	Other Vehicles	3	02-01-2011 11:11 PM

01-18-2012, 05:12 PM	#408 (permalink)
TongMan A True Z Fanatic Join Date: Feb 2010 Location: NorCal Posts: 1,297 Drives: 2013 Nissan GTR Rep Power: 715	Oh..gotcha.

03-04-2012, 12:02 AM	#410 (permalink)
darionlear Enthusiast Member Join Date: Nov 2011 Location: el paso Posts: 418 Drives: 370Z Rep Power: 14	Nope... holds up well. Rain or wind....

03-05-2012, 10:13 PM	#415 (permalink)
nmjaxx9 A True Z Fanatic Join Date: Jul 2011 Location: Middletown, Ct Posts: 5,853 Drives: 2011 Nissan 370z Rep Power: 26	Yes, I am going to do this as well, so Flush are you expecting the door handles to hold up after usage of opening and closing?

03-05-2012, 10:20 PM	#417 (permalink)
nmjaxx9 A True Z Fanatic Join Date: Jul 2011 Location: Middletown, Ct Posts: 5,853 Drives: 2011 Nissan 370z Rep Power: 26	Yeah thats my main concern, I don't want it to start peeling and look awful, I mean I could just peel it all off...but eh. I don't think I want to put in the effort if I know it won't last, may just stick to doing the emblems.

03-06-2012, 03:44 AM	#418 (permalink)
Vbp6US Enthusiast Member Join Date: Nov 2011 Location: SoCal Posts: 442 Drives: 2009 370z MB 6MT Rep Power: 14	There's going to be a lot of funky Zs in a few years roaming around with peeling handles and rims. Then the masses that don't understand will be like wtf.

03-06-2012, 11:54 AM	#419 (permalink)
nmjaxx9 A True Z Fanatic Join Date: Jul 2011 Location: Middletown, Ct Posts: 5,853 Drives: 2011 Nissan 370z Rep Power: 26	Yeah decided to stick with just doing the emblems for now, I think ill wait on the handlebars, maybe get them professionally done later.