This Plasti Dip product is Awesome!

bullitt5897 · 08-17-2011, 10:05 AM

Quote:

Originally Posted by XwChriswX

I wonder if Plasti-dip is a self lubricating material or will he need to bring his own...

I just sprayed some on y G37 last night and it repelled water... better get out the KY Jelly!!!!

Alchemy · 08-17-2011, 10:08 AM

Quote:

Originally Posted by kenchan

where have i heard this before..... ??

Lol, hey Ken at least it was REMOVABLE. What if you were in that same situation with spray paint. Now that wouldnt be pretty.

Alchemy · 08-17-2011, 10:13 AM

Quote:

Originally Posted by Nurburgr1ng

anybody have pictures of plasti dip done to rear valence? thanks in advance

Here are a few shots of mine

And the fangs for the hell of it..

kenchan · 08-17-2011, 11:15 AM

Quote:

Originally Posted by Alchemy

Lol, hey Ken at least it was REMOVABLE. What if you were in that same situation with spray paint. Now that wouldnt be pretty.

but as i mentioned earlier on the other thread, if it was spraypaint the dust would not be sticky.

i know cause i paint a lot of things in my garage.

My_third_Z · 08-17-2011, 06:21 PM

Just did my rear valence, so here's a couple pictures. I have to touch up a spot on either side where the spray decided to peel away with the tape. Oh well...the rest of it turned out really well and you can't see the two peeled spots unless you're within a couple of feet.

My_third_Z · 08-17-2011, 06:48 PM

Quick follow up question to my last post. What do you guys think about spraying the roof with this stuff. So far I have sprayed the emblems, fangs, rear valence, and the mirrors. I don't want to go overboard, but have always liked the black roof look. Too much?

Synack · 08-17-2011, 06:57 PM

Quote:

Originally Posted by My_third_Z

Quick follow up question to my last post. What do you guys think about spraying the roof with this stuff. So far I have sprayed the emblems, fangs, rear valence, and the mirrors. I don't want to go overboard, but have always liked the black roof look. Too much?

Overboard. IMO.

wilsonp · 08-17-2011, 07:10 PM

Might look ok with tinted windows, but I think it is too flat to look good. And the cutoff lines can be hard to get right.

Alchemy · 08-17-2011, 07:28 PM

Quote:

Originally Posted by My_third_Z

Quick follow up question to my last post. What do you guys think about spraying the roof with this stuff. So far I have sprayed the emblems, fangs, rear valence, and the mirrors. I don't want to go overboard, but have always liked the black roof look. Too much?

I too had contimplated it for a sec but its overboard. Plus the fact that its textured would be terrible. Roof needs to be silky smooth.

caneman88 · 08-17-2011, 08:39 PM

How does it hold up on front fangs it a rock hits it does it peel back
or is there something you can do to make it stick better like primer?
I got wacked by a big rig tire retread going about 80mph on my Nismo S-Tune front spoiler
thinking of spraying it with Plastidip any input would help
thanks

halogodx · 08-17-2011, 09:34 PM

Quote:

Originally Posted by My_third_Z

Just did my rear valence, so here's a couple pictures. I have to touch up a spot on either side where the spray decided to peel away with the tape. Oh well...the rest of it turned out really well and you can't see the two peeled spots unless you're within a couple of feet.

can you post a pic of what it looks like on your mirror's ? I'm still debating if i should do it to mine

My_third_Z · 08-17-2011, 09:43 PM

Quote:

Originally Posted by halogodx

can you post a pic of what it looks like on your mirror's ? I'm still debating if i should do it to mine

If you go back a couple of pages I have a picture from the front of my car. It shows the mirrors, but not close up. I'll take a picture of just the mirrors tomorrow when it's daylight again.

Alchemy · 08-17-2011, 10:19 PM

Quote:

Originally Posted by caneman88

How does it hold up on front fangs it a rock hits it does it peel back
or is there something you can do to make it stick better like primer?
I got wacked by a big rig tire retread going about 80mph on my Nismo S-Tune front spoiler
thinking of spraying it with Plastidip any input would help
thanks

I cant speak about long term durability as I have only had it done about two weeks now. I have yet to see a chip from rocks. Its rubbery so it will take impacts better than paint. I believe it will hold up good. I actually hit a deer goin about 45 a few days after I plasti dipped the fangs and only a little spot came off , probably where a hoof hit. My advice is do a light coat first, one that you can still see the factory paint thru. This will set a base for the other coats to stick to. After the first do another light coat or two. Give it 10 min inbetween the light coats. After that lay it on thicker. Do as many coats as you please. I figure the more coats the less likey to chip. A good half hour between thicker coats is recommended. I removed my masking less than 24 hrs after applying and it made removal a bit challenging. The plasti dip was still elasticy. Stuck to tape a bit. I would let it sit two days before removing masking. Basically do it once the plasti dip doesnt feel sticky to the touch anymore. It will for a bit after applied. Good luck.

carvalho360 · 08-18-2011, 11:35 AM

Just finished my rims this morning. Came out great. I left them mounted, just put newspaper and painters tape everyhere. Pictures will follow in an edit once im outta work. Used 3 cans. Wish i had a 4th but stores are all sold out.

Regrettably i forgot to tighten the lugs on one wheel before painting soooo hopefully it doesnt Cause a peel I was gunna try dismounting but i only had 1 jack

kenchan · 08-18-2011, 12:22 PM

Quote:

Originally Posted by Alchemy

Roof needs to be silky smooth.

thus why i removed that DiNoc wrap the very next day i installed it. lol... i like my roof smooth and glossy.

08-17-2011, 07:10 PM	#173 (permalink)
wilsonp A True Z Fanatic Join Date: Jul 2010 Location: Virginia Posts: 1,134 Drives: 2009 Touring Sp Nav Rep Power: 17	Might look ok with tinted windows, but I think it is too flat to look good. And the cutoff lines can be hard to get right. __________________ 2014 Cayman S PDK Sport Chrono White/Black Was 2009 370Z Touring Sport+Nav 7AT Metallic Black/Persimmon Was 1991 NSX Auto Black/Black

08-17-2011, 08:39 PM	#175 (permalink)
caneman88 Base Member Join Date: Mar 2009 Location: San Antonio TX Posts: 225 Drives: PG 370Z,M-35,F150 Rep Power: 16	How does it hold up on front fangs it a rock hits it does it peel back or is there something you can do to make it stick better like primer? I got wacked by a big rig tire retread going about 80mph on my Nismo S-Tune front spoiler thinking of spraying it with Plastidip any input would help thanks __________________ GO CANES \|\|Stillen CB Exhaust \|\|Berk HFC \|\|Stillen G3 Intake\|\|UpRev Tuned\|\|S-Tune Front Spoiler\|\|Setrab 19 Oil Cooler\|\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plasti-dip'd front fangs and rear exhaust panel	NickTurnon	Exterior & Interior	22	08-30-2011 05:14 PM
Plasti-dipped A-Pillars	SeeyaBud86	Exterior & Interior	60	08-16-2011 03:43 PM
Plasti-Dippers!!	delusional	Nissan 370Z Photos / Spyshots / Video / Media Gallery	7	08-06-2011 09:25 AM
Plasti dipped the grille	Fezzik	Other Vehicles	16	05-02-2011 04:43 PM
Side trim is plasti dipped on the Red Vert	cereal2k	Other Vehicles	3	02-01-2011 11:11 PM

08-17-2011, 06:48 PM	#171 (permalink)
My_third_Z Enthusiast Member Join Date: Feb 2011 Location: Charleston,SC Posts: 312 Drives: Blue 09 370z Rep Power: 14	Quick follow up question to my last post. What do you guys think about spraying the roof with this stuff. So far I have sprayed the emblems, fangs, rear valence, and the mirrors. I don't want to go overboard, but have always liked the black roof look. Too much?

08-18-2011, 11:35 AM	#179 (permalink)
carvalho360 Base Member Join Date: Jul 2010 Location: Philadelphia Posts: 114 Drives: 09 370z black Rep Power: 15	Just finished my rims this morning. Came out great. I left them mounted, just put newspaper and painters tape everyhere. Pictures will follow in an edit once im outta work. Used 3 cans. Wish i had a 4th but stores are all sold out. Regrettably i forgot to tighten the lugs on one wheel before painting soooo hopefully it doesnt Cause a peel I was gunna try dismounting but i only had 1 jack