This Plasti Dip product is Awesome!

Alchemy · 05-06-2012, 02:26 PM

Quote:

Originally Posted by LakeShow

^^Blue and black contrast looking good.

Random Strata · 05-08-2012, 10:01 PM

Ok so I bought this plasti dip and was planing on painting my wheels and door handle but then I thought, I want to see what it looks like when it matches my car paint.

Anyone know a good place to find Platinum Graphite?

I looked at Duplicolor for a match and found BNS0564 at Autozone but when I went there they didn't have it and they searched their computers and found out that that color wasn't available from duplicolor.

bdavis89 · 05-08-2012, 10:04 PM

Quote:

Originally Posted by Random Strata

Ok so I bought this plasti dip and was planing on painting my wheels and door handle but then I thought, I want to see what it looks like when it matches my car paint.

Anyone know a good place to find Platinum Graphite?

I looked at Duplicolor for a match and found BNS0564 at Autozone but when I went there they didn't have it and they searched their computers and found out that that color wasn't available from duplicolor.

Keep in mind duplicolor won't come off like plastidip. You could check into dipyourcar.com? I think they can make custom colors, and maybe something if you gave them the color code?

Random Strata · 05-08-2012, 10:32 PM

I was actually going to plasti dip the rims and door handle first, then paint over that. I checked dipyourcar.com and didn't see any options for custom colors, I'll try emailing them just in case.

Thanks

b1adesofcha0s · 05-08-2012, 10:36 PM

I don't know if they'll be able to color match a custom color for you. The closest you could probably get would be a black base coat with the silver metalizer over it. I used this combo to get a dark gunmetal color for my wheels. I think if you spray more of the metalizer than I did (3 coats) you can get a lighter gray color closer to what the PG is.

batman_4 · 05-21-2012, 06:28 PM

i have a question for the plasti-dip pros. i applied 5 coats to my rear valence with 20-30 minute intervals of drying. after my last coat i waited about 2hrs before removing my painters tape and when i did the plasti-dip came with it, leaving torn edges around my whole valence. what did i do wrong (1st time using this product)? every video i see on youtube the person just start peeling and the plasti-dip always breaks away from the part of interest without issues.

Dembflyr · 05-21-2012, 08:59 PM

If you want a clean line the. You need to build up a thick coat and pull the tape while it is still wet.

bdavis89 · 05-21-2012, 09:24 PM

Quote:

Originally Posted by batman_4

i have a question for the plasti-dip pros. i applied 5 coats to my rear valence with 20-30 minute intervals of drying. after my last coat i waited about 2hrs before removing my painters tape and when i did the plasti-dip came with it, leaving torn edges around my whole valence. what did i do wrong (1st time using this product)? every video i see on youtube the person just start peeling and the plasti-dip always breaks away from the part of interest without issues.

Quote:

Originally Posted by Dembflyr

If you want a clean line the. You need to build up a thick coat and pull the tape while it is still wet.

Correct sir!

PlastiDip - Masking, Lines and Stripes on Your Car - How to PlastiDip in Sections - YouTube

batman_4 · 05-22-2012, 01:27 AM

Quote:

Originally Posted by Dembflyr

If you want a clean line the. You need to build up a thick coat and pull the tape while it is still wet.

Quote:

Originally Posted by bdavis89

Correct sir!

PlastiDip - Masking, Lines and Stripes on Your Car - How to PlastiDip in Sections - YouTube

thank you guys

i will have my 2nd attempt tmrw

nmjaxx9 · 05-29-2012, 11:01 PM

just did a trial run with the plasti dip, actually is much darker in person, the plasti dip I got with like 4-5 coats is a very dark shade of black almost a lil glossy too. Since I didn't have enough time tonight I just removed the front plsti dipped emblem, I will be doing all the emblems sometime this week and post pics. Should be interesting how they turn out, and as mentioned masking is the most important part, something I learned on my trial run.

Footloose301 · 05-30-2012, 12:02 PM

Thank god this stuff peels off so you guys will be able to save the car alas. Don't want it to be mistaken for a Honda...

nmjaxx9 · 05-30-2012, 12:02 PM

Quote:

Originally Posted by Footloose301

Thank god this stuff peels off so you guys will be able to save the car alas. Don't want it to be mistaken for a Honda...

nmjaxx9 · 05-30-2012, 12:03 PM

gonna get started on mine now, will post pics soon.

Random Strata · 06-04-2012, 12:27 PM

Has anyone tried the Plasti Dip Smoke yet?

I ended up doing my wheels and door handle and realized that the headlights and tail lights now stick out like a sore thumb. I was thinking of giving this a try but I'm not sure how it will look.

b1adesofcha0s · 06-04-2012, 12:39 PM

Quote:

Originally Posted by Random Strata

Has anyone tried the Plasti Dip Smoke yet?

I ended up doing my wheels and door handle and realized that the headlights and tail lights now stick out like a sore thumb. I was thinking of giving this a try but I'm not sure how it will look.

Well if it's texture is like every other kind of plasti dip, then it will probably be terrible. You don't want your headlights/tail lights to look like they have a coat of rubber on them. They look good with a smooth finish which plasti dip will never give you.

05-08-2012, 10:36 PM	#650 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	I don't know if they'll be able to color match a custom color for you. The closest you could probably get would be a black base coat with the silver metalizer over it. I used this combo to get a dark gunmetal color for my wheels. I think if you spray more of the metalizer than I did (3 coats) you can get a lighter gray color closer to what the PG is. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

05-21-2012, 06:28 PM	#651 (permalink)
batman_4 A True Z Fanatic Join Date: Dec 2008 Location: McAllen Tx. Posts: 1,038 Drives: '09 PW 370Z Rep Power: 368	i have a question for the plasti-dip pros. i applied 5 coats to my rear valence with 20-30 minute intervals of drying. after my last coat i waited about 2hrs before removing my painters tape and when i did the plasti-dip came with it, leaving torn edges around my whole valence. what did i do wrong (1st time using this product)? every video i see on youtube the person just start peeling and the plasti-dip always breaks away from the part of interest without issues. __________________ '09 6spd. Touring: Eibach / SPC / Motordyne / Berk / Z1 / Oneighty / Mines / SSR / Stillen / CFE Last edited by batman_4; 05-21-2012 at 06:31 PM.

05-21-2012, 08:59 PM	#652 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 16	If you want a clean line the. You need to build up a thick coat and pull the tape while it is still wet. __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

05-30-2012, 12:02 PM	#656 (permalink)
Footloose301 A True Z Fanatic Join Date: Apr 2010 Location: Naples, FL Posts: 2,659 Drives: 40th Rep Power: 21	Thank god this stuff peels off so you guys will be able to save the car alas. Don't want it to be mistaken for a Honda... __________________ 2010 40th Anniversary 370Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plasti-dip'd front fangs and rear exhaust panel	NickTurnon	Exterior & Interior	22	08-30-2011 05:14 PM
Plasti-dipped A-Pillars	SeeyaBud86	Exterior & Interior	60	08-16-2011 03:43 PM
Plasti-Dippers!!	delusional	Nissan 370Z Photos / Spyshots / Video / Media Gallery	7	08-06-2011 09:25 AM
Plasti dipped the grille	Fezzik	Other Vehicles	16	05-02-2011 04:43 PM
Side trim is plasti dipped on the Red Vert	cereal2k	Other Vehicles	3	02-01-2011 11:11 PM

05-08-2012, 10:01 PM	#647 (permalink)
Random Strata Base Member Join Date: Feb 2011 Location: Livermore, CA Posts: 34 Drives: '10 370Z K51 M6 Rep Power: 14	Ok so I bought this plasti dip and was planing on painting my wheels and door handle but then I thought, I want to see what it looks like when it matches my car paint. Anyone know a good place to find Platinum Graphite? I looked at Duplicolor for a match and found BNS0564 at Autozone but when I went there they didn't have it and they searched their computers and found out that that color wasn't available from duplicolor.

05-08-2012, 10:32 PM	#649 (permalink)
Random Strata Base Member Join Date: Feb 2011 Location: Livermore, CA Posts: 34 Drives: '10 370Z K51 M6 Rep Power: 14	I was actually going to plasti dip the rims and door handle first, then paint over that. I checked dipyourcar.com and didn't see any options for custom colors, I'll try emailing them just in case. Thanks

05-29-2012, 11:01 PM	#655 (permalink)
nmjaxx9 A True Z Fanatic Join Date: Jul 2011 Location: Middletown, Ct Posts: 5,853 Drives: 2011 Nissan 370z Rep Power: 26	just did a trial run with the plasti dip, actually is much darker in person, the plasti dip I got with like 4-5 coats is a very dark shade of black almost a lil glossy too. Since I didn't have enough time tonight I just removed the front plsti dipped emblem, I will be doing all the emblems sometime this week and post pics. Should be interesting how they turn out, and as mentioned masking is the most important part, something I learned on my trial run.

05-30-2012, 12:03 PM	#658 (permalink)
nmjaxx9 A True Z Fanatic Join Date: Jul 2011 Location: Middletown, Ct Posts: 5,853 Drives: 2011 Nissan 370z Rep Power: 26	gonna get started on mine now, will post pics soon.

06-04-2012, 12:27 PM	#659 (permalink)
Random Strata Base Member Join Date: Feb 2011 Location: Livermore, CA Posts: 34 Drives: '10 370Z K51 M6 Rep Power: 14	Has anyone tried the Plasti Dip Smoke yet? I ended up doing my wheels and door handle and realized that the headlights and tail lights now stick out like a sore thumb. I was thinking of giving this a try but I'm not sure how it will look.