07-27-2011, 04:35 PM
|
#7 (permalink)
|
|
Base Member
Join Date: Jul 2011
Location: Suffolk, NY
Posts: 57
Drives: 09 370z PW MT6 SPT
Rep Power: 14
|
Quote:
Originally Posted by EVOHUNTER
Its very easy to make your own, buy a generic one.. i used the eagle talon/mitshi one
hacked it up so it sit nice and flush, put a screw in the middle to hold it there. go buy a small can of bondo.. fill the cranks i did like 6 coats of bondo. Then i sanded it alot, go backa nd fill the small pits then re-sand, Remove the screw and your done.. you can either paint it or get it rapped.. i had mine covered in real carbon fibre. after said and done it cost me 115 bucks but about 25 hours of sanding and bondo!
hope this helps!!
|
Thanks for the input. Do you have any pictures of the finished product? Also what gauges did you go with?
|
|
|
Similar Threads
Threaded Mode
