|
Its very easy to make your own, buy a generic one.. i used the eagle talon/mitshi one hacked it up so it sit nice and flush, put a screw in
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
07-27-2011, 02:20 PM
|
#3 (permalink) |
|
Track Member
Join Date: Jul 2011
Location: Edmonton, Canada
Posts: 681
Drives: BOOSTED3-7-0
Rep Power: 15  |
Its very easy to make your own, buy a generic one.. i used the eagle talon/mitshi one
hacked it up so it sit nice and flush, put a screw in the middle to hold it there. go buy a small can of bondo.. fill the cranks i did like 6 coats of bondo. Then i sanded it alot, go backa nd fill the small pits then re-sand, Remove the screw and your done.. you can either paint it or get it rapped.. i had mine covered in real carbon fibre. after said and done it cost me 115 bucks but about 25 hours of sanding and bondo! hope this helps!! |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| A-Pillar Gauge Pods? | RCZ | Exterior & Interior | 64 | 05-27-2014 09:16 PM |
| my b-pillar came off :( | dudesky | Exterior & Interior | 9 | 05-03-2011 08:02 PM |
| WTB: OEM B-Pillar | Boost_lee | Wanted | 1 | 01-03-2011 01:17 AM |
| Gauge Pillar | Snakes709 | Exterior & Interior | 15 | 12-21-2009 08:25 PM |
| What happened to the tire pressure gauge and speedo in the middle gauge cluster? | rbratton | Nissan 370Z General Discussions | 33 | 01-24-2009 10:28 PM |
Threaded Mode
