Looking for a large(er) rear diffuser

cheshirecat · 11-01-2012, 08:35 AM

Quote:

Originally Posted by Bullitt@UAMotorsports

I have said this before... The problem with an aftermarket functional diffuser is Clearance... Unless people are willing to cut their stock bumpers don't count on much support from manufacturers. If I had a list of 20+ people with deposits in hand I would have a product on the market before Christmas... But that's not going to happen. There is just not that much interest in the product.

Our design looks similar to an F430 challenge rear diffuser

A rear diffuser similar to the top secret (or mastergrade) one from the 350 has been one of the most requested items on this forum. IMO, sales would be amazing if it was in any way functional and aesthetically pleasing.

DarkJak · 11-01-2012, 12:31 PM

I'd be down for cutting out part of the bumper for a functional diffuser. I'm guessing the sectioned off area?

speedfreek · 11-01-2012, 01:09 PM

I have been looking for one that is similar to the Varis diffuser but on the sides that wrap around the rear bumper it doesnt have the molded part above the lines that swoop down. The middle looks more like the Fujimura. I dont know if that makes sense I will try to find the picture after work and post it up.

cheshirecat · 11-01-2012, 02:26 PM

Sounds like the Evo-R diffuser.

speedfreek · 11-01-2012, 04:25 PM

No it's not the Evo-R diffuser. This one wraps completely around the side of the rear bumper like the Varis except that on the left and right side it doesnt have the molding that goes higher up on the rear fender. The sides are more like side blades if you will and the rear looks almost like the fujimura. I am thinking it may be a one off custom diffuser as I have not been able to find it. Ill post it up in here in a few hours. But if UAM made it I would buy it!

Ni55anPat · 11-01-2012, 05:01 PM

i want this done....let's get some people

speedfreek · 11-01-2012, 07:29 PM

I want something like this.

ZKraken22 · 11-01-2012, 07:44 PM

i like that but make those 4 blades larger and more dramatic

bullitt5897 · 11-01-2012, 09:02 PM

Our diffuser design is along these lines:

It would require cutting of your oem bumper. I am working on the fitment and exhaust cut outs.

scottIN · 11-01-2012, 09:03 PM

I was behind a mini van (stock) today that had a diffuser. They may be getting played out...

Ni55anPat · 11-01-2012, 09:04 PM

Quote:

Originally Posted by speedfreek

i want something like this.

sick!

Ni55anPat · 11-01-2012, 09:05 PM

Quote:

Originally Posted by Bullitt@UAMotorsports

Our diffuser design is along these lines:

It would require cutting of your oem bumper. I am working on the fitment and exhaust cut outs.

that looks good.

whos interested? let's get people.....

cheshirecat · 11-02-2012, 10:16 AM

I think they did a petition before. I'd say it would have the same amount of people if not more.

I'd personally be more willing to jump on the boat if the diffuser didn't require OEM cutting, but if the results are worth it, let's break the sawsall out

B&W_Evader · 11-02-2012, 10:43 AM

If I was to do it... I would want the whole rear bumper with the custom exhaust required to do it right. Don't think you're going to get the function without moving those dang mufflers out of the way. To me it's not worth doing unless there's some real functional benefit. But I don't think my personal preferences coincides with most of the people that would be buying this.

Personally, I don't like any of those paste on panels.

bullitt5897 · 11-02-2012, 11:10 AM

Hey guys since I have been at SEMA all week I have gathered some great Ideas for the diffuser. I am looking at how we can make the unit fit with the stock bumper with ZERO modification. This may mean the diffuser sticks out further back from the car but will be able to utilize all exhausts outside of quad exhausts.

11-01-2012, 01:09 PM	#48 (permalink)
speedfreek A True Z Fanatic Join Date: Feb 2012 Location: Huntsville,AL Posts: 1,724 Drives: '12 370Z PW 6sp Rep Power: 18	I have been looking for one that is similar to the Varis diffuser but on the sides that wrap around the rear bumper it doesnt have the molded part above the lines that swoop down. The middle looks more like the Fujimura. I dont know if that makes sense I will try to find the picture after work and post it up. __________________ Tomei\|Berk\|Takeda\|ZSpeed\|Fortune Auto\|Swift\|Eibach\|SPL\|Carbotech\|Motul\|Powertrix\|Stillen\|Aerojacket\|Z1\|Forgestar\|Enkei\|Project Kics\|Nismo Ti\|Llumar speedfreek's journal Last edited by speedfreek; 11-01-2012 at 01:12 PM.

11-01-2012, 02:26 PM	#49 (permalink)
cheshirecat A True Z Fanatic Join Date: Jan 2009 Location: Florida Posts: 1,428 Drives: N54 135i Rep Power: 292	Sounds like the Evo-R diffuser. LCR Autowerks likes this.

11-01-2012, 04:25 PM	#50 (permalink)
speedfreek A True Z Fanatic Join Date: Feb 2012 Location: Huntsville,AL Posts: 1,724 Drives: '12 370Z PW 6sp Rep Power: 18	No it's not the Evo-R diffuser. This one wraps completely around the side of the rear bumper like the Varis except that on the left and right side it doesnt have the molding that goes higher up on the rear fender. The sides are more like side blades if you will and the rear looks almost like the fujimura. I am thinking it may be a one off custom diffuser as I have not been able to find it. Ill post it up in here in a few hours. But if UAM made it I would buy it! __________________ Tomei\|Berk\|Takeda\|ZSpeed\|Fortune Auto\|Swift\|Eibach\|SPL\|Carbotech\|Motul\|Powertrix\|Stillen\|Aerojacket\|Z1\|Forgestar\|Enkei\|Project Kics\|Nismo Ti\|Llumar speedfreek's journal

11-01-2012, 07:29 PM	#52 (permalink)
speedfreek A True Z Fanatic Join Date: Feb 2012 Location: Huntsville,AL Posts: 1,724 Drives: '12 370Z PW 6sp Rep Power: 18	I want something like this. Ni55anPat likes this. __________________ Tomei\|Berk\|Takeda\|ZSpeed\|Fortune Auto\|Swift\|Eibach\|SPL\|Carbotech\|Motul\|Powertrix\|Stillen\|Aerojacket\|Z1\|Forgestar\|Enkei\|Project Kics\|Nismo Ti\|Llumar speedfreek's journal

11-01-2012, 07:44 PM	#53 (permalink)
ZKraken22 A True Z Fanatic Join Date: Jun 2011 Location: Houston Posts: 1,115 Drives: 10 Nissan 370Z 7AT Rep Power: 16	i like that but make those 4 blades larger and more dramatic RoshDawg likes this. __________________ Litespeed Racing Titanium Cold Air intake// GT Haus Axle// GarageLine combo// Nismo sway bars// Nismo Spoiler // Berk TP's

11-01-2012, 12:31 PM	#47 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,397 Drives: 2009 370Z Rep Power: 16804	I'd be down for cutting out part of the bumper for a functional diffuser. I'm guessing the sectioned off area?

11-01-2012, 05:01 PM	#51 (permalink)
Ni55anPat A True Z Fanatic Join Date: Mar 2010 Location: Chicago Posts: 1,831 Drives: Zed Rep Power: 18	i want this done....let's get some people

11-01-2012, 09:02 PM	#54 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Our diffuser design is along these lines: It would require cutting of your oem bumper. I am working on the fitment and exhaust cut outs. Unique_Z and RoshDawg like this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

11-01-2012, 09:03 PM	#55 (permalink)
scottIN Track Member Join Date: Aug 2011 Location: New Castle, Indiana Posts: 764 Drives: '12 370Z Rep Power: 55	I was behind a mini van (stock) today that had a diffuser. They may be getting played out...

11-02-2012, 10:16 AM	#58 (permalink)
cheshirecat A True Z Fanatic Join Date: Jan 2009 Location: Florida Posts: 1,428 Drives: N54 135i Rep Power: 292	I think they did a petition before. I'd say it would have the same amount of people if not more. I'd personally be more willing to jump on the boat if the diffuser didn't require OEM cutting, but if the results are worth it, let's break the sawsall out

11-02-2012, 10:43 AM	#59 (permalink)
B&W_Evader Track Member Join Date: Aug 2011 Location: CA Posts: 972 Drives: slower than before Rep Power: 387	If I was to do it... I would want the whole rear bumper with the custom exhaust required to do it right. Don't think you're going to get the function without moving those dang mufflers out of the way. To me it's not worth doing unless there's some real functional benefit. But I don't think my personal preferences coincides with most of the people that would be buying this. Personally, I don't like any of those paste on panels. __________________ \|RIP\|6spd-sport\|OSG-LSD\|XP8\|RBF600\|Eibach Sways\|RE-71R\|FI-34Row\|Gen3-CAI\|Yaw P.S.\|

11-02-2012, 11:10 AM	#60 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Hey guys since I have been at SEMA all week I have gathered some great Ideas for the diffuser. I am looking at how we can make the unit fit with the stock bumper with ZERO modification. This may mean the diffuser sticks out further back from the car but will be able to utilize all exhausts outside of quad exhausts. cheshirecat, Ni55anPat, nismo 1234 and 1 others like this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fujimara Rear Diffuser VS. EVO-R NEW Diffuser	KB2	Exterior & Interior	12	02-11-2014 09:03 PM
FS Evo-R CF Rear Diffuser	DaveyJones	Parts for sale (Private Classifieds)	12	10-23-2010 07:33 AM
Name this rear diffuser!	JoeD	Exterior & Interior	13	05-22-2010 08:45 PM
Evo-R rear CF Diffuser and FI LTH spot	CGMobile370Z	Parts for sale (Private Classifieds)	9	03-11-2010 02:53 PM
rear diffuser	jrmlk	Exterior & Interior	5	08-20-2009 10:58 PM