STi-R Clear Lens Comparison Photos + Updated Headlight Services

ONEighty · 07-08-2011, 03:24 AM

Hey guys, been a minute since we updated you with some new info. We just revised and updated the headlight service thread with all options we offer for the the 370z headlights... check it out: http://www.the370z.com/body-interior...ring-11-a.html

As most know we're very meticulous to cosmetic modifications, specifically to headlights. Last several months I've started to mess around with projector retrofits, projector modifications, and did a whole ton of research on OEM and aftermarket HID bulbs and kits. I was familiar with the topic for several years already, but being so busy, I never got to study the actual science of it till now.

First things first, a few discussions came up a couple of months ago about upgrading the factory projector lens for a brighter light output, and sharper cut off. Here's a quick summary behind it.

The factory projectors use fresnel lenses. These lenses have tiny little ridges that prevent light from being fully projected, causing the beam and light cut off to get distorted. Replacing the lens with a clear one gives you maximum performance, and cleans up the light beam providing you with a brighter output, at the same time giving off a whiter output, and mostly illuminating the yellow hue. Another option is to remove a piece of the shield inside the projector for sharpest cutoff, and at the same time adding a little bit of color to the cut off line.

Check out the difference (STOCK 4300K Bulb):

Swapping the lens and modifying the shield is a better alternative to swapping your factory 4300K bulbs for less brighter 6000K bulbs at the same time providing you with a brighter and sharper light output.

You can pick up a pair of clear projector lenses from TheRetrofitSource for $50 + shipping, but you will need to create your own spacer to properly space out the lens for the sharpest cut off.

-------------------------------------------------------
We're also working on figuring out the issue with the flickering aftermarket bulb issue which is occurring on all new Nissans and Infinitis with aftermarket HID bulbs. So far we know that it's a combination of the new ballast and ignitor, when installing the older generation ballasts onto the headlights, the issue does not occur. We'll keep you guys updated as we continue the research.

Thanks,
Igor

christian370z · 07-08-2011, 01:57 PM

That is a huge improvement, not to mention an amazing deal you have to offer. How hard of an install would it be for a DIY'er?

delusional · 07-08-2011, 02:42 PM

wow that cut off line is really nice and sharp. amazing work guys

ONEighty · 07-08-2011, 02:49 PM

Quote:

Originally Posted by christian370z

That is a huge improvement, not to mention an amazing deal you have to offer. How hard of an install would it be for a DIY'er?

It's pretty straight forward, probably a several hour job if this is your first time doing headlight.

You can check out the DIY on G35Driver, the G35/7 sedans use the same projectors as 370z

DIY: STi-R clear lens swap/ - G35Driver

christian370z · 07-08-2011, 09:33 PM

Repped, thanks Igor. I need to read through that thread now.

CBRich · 07-08-2011, 09:58 PM

Now that's the TSX style line I've been looking for.

ONEighty · 07-12-2011, 02:24 PM

We can also modify the cut off line to specification, either add more blue, or get rid of the blue all together.

Ron · 07-12-2011, 02:52 PM

Quote:

Originally Posted by Igor@ONEighty

We're also working on figuring out the issue with the flickering aftermarket bulb issue which is occurring on all new Nissans and Infinitis with aftermarket HID bulbs. So far we know that it's a combination of the new ballast and ignitor, when installing the older generation ballasts onto the headlights, the issue does not occur. We'll keep you guys updated as we continue the research.

Thanks,
Igor

This is happening to me, I hate it! Please figure it out

hdskull · 07-13-2011, 05:47 PM

FINALLY! After my friend's TL lens swap, I've been wanting something like this! PM price for projector core swap, please!

gaveup · 01-18-2012, 03:19 PM

I know this is an old thread, but the DIY link on g37 is gone now.

To get the projector out, do you have to open up the headlights or can you get at them from the back and pull them out?

ONEighty · 01-18-2012, 07:44 PM

You must open up the headlights, you cannot take the projector out any other way

Ron · 01-18-2012, 07:49 PM

any news on the aftermarket HIDs issue on newer Nissans/Infinitis?

equalme · 11-25-2013, 09:13 PM

Any good DIY guide on this? My previous car was a TSX and I miss the nice blue cutoff that it had...was quite disappointed with the 370Z since the Maxima has good cutoff as well.

chops · 11-26-2013, 12:35 AM

Quote:

Originally Posted by equalme

Any good DIY guide on this? My previous car was a TSX and I miss the nice blue cutoff that it had...was quite disappointed with the 370Z since the Maxima has good cutoff as well.

its pretty simple if you dont mind taking apart the headlight. you can buy the sti-r lens from theretrofitsource.com and it comes with a free spacer. you'd just need to take the lens off the headlight, remove the lens and put the spacer in along with the new lens, put it back together

equalme · 11-26-2013, 12:41 AM

Quote:

Originally Posted by chops

its pretty simple if you dont mind taking apart the headlight. you can buy the sti-r lens from theretrofitsource.com and it comes with a free spacer. you'd just need to take the lens off the headlight, remove the lens and put the spacer in along with the new lens, put it back together

Any possibility I could mess up the projector aim? Spacer tuning kit recommended?

Thanks mate!

07-08-2011, 03:24 AM	#1 (permalink)
ONEighty The370Z.com Sponsor Join Date: Jan 2009 Location: Brooklyn, NY Posts: 277 Drives: 2011 G37S & 2010 S4 Rep Power: 16	STi-R Clear Lens Comparison Photos + Updated Headlight Services Hey guys, been a minute since we updated you with some new info. We just revised and updated the headlight service thread with all options we offer for the the 370z headlights... check it out: http://www.the370z.com/body-interior...ring-11-a.html As most know we're very meticulous to cosmetic modifications, specifically to headlights. Last several months I've started to mess around with projector retrofits, projector modifications, and did a whole ton of research on OEM and aftermarket HID bulbs and kits. I was familiar with the topic for several years already, but being so busy, I never got to study the actual science of it till now. First things first, a few discussions came up a couple of months ago about upgrading the factory projector lens for a brighter light output, and sharper cut off. Here's a quick summary behind it. The factory projectors use fresnel lenses. These lenses have tiny little ridges that prevent light from being fully projected, causing the beam and light cut off to get distorted. Replacing the lens with a clear one gives you maximum performance, and cleans up the light beam providing you with a brighter output, at the same time giving off a whiter output, and mostly illuminating the yellow hue. Another option is to remove a piece of the shield inside the projector for sharpest cutoff, and at the same time adding a little bit of color to the cut off line. Check out the difference (STOCK 4300K Bulb): Swapping the lens and modifying the shield is a better alternative to swapping your factory 4300K bulbs for less brighter 6000K bulbs at the same time providing you with a brighter and sharper light output. You can pick up a pair of clear projector lenses from TheRetrofitSource for $50 + shipping, but you will need to create your own spacer to properly space out the lens for the sharpest cut off. ------------------------------------------------------- We're also working on figuring out the issue with the flickering aftermarket bulb issue which is occurring on all new Nissans and Infinitis with aftermarket HID bulbs. So far we know that it's a combination of the new ballast and ignitor, when installing the older generation ballasts onto the headlights, the issue does not occur. We'll keep you guys updated as we continue the research. Thanks, Igor fuct likes this. __________________ CUSTOM HEADLIGHT DESIGNS AND MODIFICATIONS - PRICES & DETAILS Contact: (347) 821-6176 (M-F 9AM-6PM EST) EMAIL: info@oneightynyc.com Last edited by ONEighty; 05-30-2012 at 05:12 PM.

07-08-2011, 01:57 PM	#2 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 432	That is a huge improvement, not to mention an amazing deal you have to offer. How hard of an install would it be for a DIY'er? __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

07-08-2011, 02:42 PM	#3 (permalink)
delusional Track Member Join Date: Feb 2011 Location: NewYork Posts: 968 Drives: 09 PG T/S/N 7AT Rep Power: 15	wow that cut off line is really nice and sharp. amazing work guys __________________ 2009 Platinum Graphite Touring [ Sport Package ¦¦ Navigation ¦¦ 7 Speed Automatic ] [ Berk ¦ H&R ¦ ONEighty ¦ K&N ¦ Stillen ¦ Eibach ¦ Cobb ¦ Ichiba ¦ Hankook ]

07-08-2011, 09:33 PM	#5 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 432	Repped, thanks Igor. I need to read through that thread now. __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

07-12-2011, 02:24 PM	#7 (permalink)
ONEighty The370Z.com Sponsor Join Date: Jan 2009 Location: Brooklyn, NY Posts: 277 Drives: 2011 G37S & 2010 S4 Rep Power: 16	We can also modify the cut off line to specification, either add more blue, or get rid of the blue all together. __________________ CUSTOM HEADLIGHT DESIGNS AND MODIFICATIONS - PRICES & DETAILS Contact: (347) 821-6176 (M-F 9AM-6PM EST) EMAIL: info@oneightynyc.com

07-08-2011, 09:58 PM	#6 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	Now that's the TSX style line I've been looking for.

07-13-2011, 05:47 PM	#9 (permalink)
hdskull Track Member Join Date: Jun 2009 Location: San Diego Posts: 680 Drives: '10 Black 370Z 6MT Rep Power: 17	FINALLY! After my friend's TL lens swap, I've been wanting something like this! PM price for projector core swap, please! __________________ ^ Kenwood DDX616 \| Polk DB6501 \| Llumar 23% tint \| STi-R Clear Lens SSR Type-F \| F.I. 18" CF \| Stillen Gen 3 \| KW V3

01-18-2012, 03:19 PM	#10 (permalink)
gaveup Enthusiast Member Join Date: Aug 2010 Location: Tamarac FL Posts: 324 Drives: 10 Nissan 370Z MB M6 Rep Power: 181	I know this is an old thread, but the DIY link on g37 is gone now. To get the projector out, do you have to open up the headlights or can you get at them from the back and pull them out? __________________ 2010 Magnetic Black Metallic 370Z 6M stillen gen 3 CAI - topspeed test pipes - invidia gemini CBE - UpRev tune 301whp (HP Logic Mustang Dyno)

01-18-2012, 07:44 PM	#11 (permalink)
ONEighty The370Z.com Sponsor Join Date: Jan 2009 Location: Brooklyn, NY Posts: 277 Drives: 2011 G37S & 2010 S4 Rep Power: 16	You must open up the headlights, you cannot take the projector out any other way __________________ CUSTOM HEADLIGHT DESIGNS AND MODIFICATIONS - PRICES & DETAILS Contact: (347) 821-6176 (M-F 9AM-6PM EST) EMAIL: info@oneightynyc.com

01-18-2012, 07:49 PM	#12 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 22	any news on the aftermarket HIDs issue on newer Nissans/Infinitis? __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ]

11-25-2013, 09:13 PM	#13 (permalink)
equalme Track Member Join Date: Feb 2013 Location: Kansas City Posts: 656 Drives: RCF Rep Power: 13	Any good DIY guide on this? My previous car was a TSX and I miss the nice blue cutoff that it had...was quite disappointed with the 370Z since the Maxima has good cutoff as well.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
180°\|Custom - Headlight Work Log (frequently updated)	ONEighty	Exterior & Interior	302	01-07-2021 08:33 AM
AWDTuning Shop Services	awdtuning	Awdtuning	2	11-20-2015 07:35 PM
Check your headlight lens!	DIGItonium	Exterior & Interior	7	06-05-2011 12:09 PM
Performance Motorsport Facility Info & Services	JDMFairlady21	Performance Motorsport	1	01-19-2011 10:36 PM
Mobile detailers/handwashing services in the area?	dawankler	Mid-Atlantic Region	3	06-25-2009 04:58 PM