seats

11blkZ · 05-10-2011, 05:01 PM

I have read all the threads about seats....however I have not read of anyone actually getting bigger seats or even possibly modifying the stock seats.

I may have missed it but I searched it just about every way I could think of...

The seats are not bad, but I have to sit a certain way for the metal on the bottom to not dig into my legs. I am 6"1 and about 220...

Econ · 05-10-2011, 05:17 PM

Quote:

Originally Posted by 11blkZ

I have read all the threads about seats....however I have not read of anyone actually getting bigger seats or even possibly modifying the stock seats.

I may have missed it but I searched it just about every way I could think of...

The seats are not bad, but I have to sit a certain way for the metal on the bottom to not dig into my legs. I am 6"1 and about 220...

What metal do you speak of?

11blkZ · 05-10-2011, 05:27 PM

well i have the cloth seats...and if you feel down around mid thigh area, the sides of the seats (assuming the framing) is metal or really hard plastic....

kenchan · 05-10-2011, 05:30 PM

yah, there is metal down there.

run a quick search 'sparco' 'bride' and you should see the threads people've done with swapping out to aftermarket seats.

11blkZ · 05-10-2011, 05:34 PM

are they a lot wider on the bottom?

kenchan · 05-10-2011, 05:37 PM

not sure about wider but they talk about aftermarket seats. you'll have to try out the seats you like and get the rails for them.

HoneyBadger · 05-10-2011, 06:13 PM

I'm 6'1 and about 210 and the cloth seats are a bit snug on me. Not bod, but a little tight.

11blkZ · 05-10-2011, 07:00 PM

are you thinking of changing them? It isn't that the seat is too snug...it is just that damn metal...almost like the padding is just too thin in that spot.

pg6speed · 05-10-2011, 07:18 PM

I'm 6'4" 250lbs I know exactly what your talking about. Check out the Sparco evo3, there is a thread here where someone has one installed.

11blkZ · 05-10-2011, 07:29 PM

so those are bigger huh? Thanks for the information.

WhiskeyHotel · 05-10-2011, 07:48 PM

Check out Corbeau also. The A4 wides look pretty good. Maybe not as well built as the others, but cheaper..

11blkZ · 05-10-2011, 09:06 PM

thanks man...the sparco's look like they are a little too wide for the car...not for me though lol...I will look and see on the corbeau's also.

pg6speed · 05-11-2011, 11:45 AM

370Z Sparco EVO3 Seats installed - pictures

11blkZ · 05-11-2011, 01:31 PM

I was reading the thread and it looked like they were a little big, is that right? Or do they fit in there just right?

11blkZ · 06-10-2011, 12:55 PM

what about just putting some seat covers over the stock seats to make more padding? Anyone tried this method?

I read the thread on the leather seat covers that just go over the cloth, and then the padding there would be at least double...I would think that would help with making the seat more comfortable.

05-10-2011, 05:01 PM	#1 (permalink)
11blkZ Base Member Join Date: May 2011 Location: Honolulu, HI Posts: 27 Drives: 2011 370z black Auto Rep Power: 14	seats I have read all the threads about seats....however I have not read of anyone actually getting bigger seats or even possibly modifying the stock seats. I may have missed it but I searched it just about every way I could think of... The seats are not bad, but I have to sit a certain way for the metal on the bottom to not dig into my legs. I am 6"1 and about 220...

05-10-2011, 06:13 PM	#7 (permalink)
HoneyBadger Base Member Join Date: Apr 2011 Location: Knoxville, TN Posts: 67 Drives: 2010 PG 370z Rep Power: 14	I'm 6'1 and about 210 and the cloth seats are a bit snug on me. Not bod, but a little tight. __________________ HoneyBadger don't care.

05-10-2011, 07:18 PM	#9 (permalink)
pg6speed Base Member Join Date: Jul 2009 Location: San Antonio Posts: 223 Drives: 10 Armada Rep Power: 16	I'm 6'4" 250lbs I know exactly what your talking about. Check out the Sparco evo3, there is a thread here where someone has one installed. __________________ STILLEN G3 / F.I. TDX (NO RESONATORS) / F.I. LTH / UpRev Tuned / BC-Racing ER Coilovers / DIY Oil Cooler / Short Shifter

05-11-2011, 11:45 AM	#13 (permalink)
pg6speed Base Member Join Date: Jul 2009 Location: San Antonio Posts: 223 Drives: 10 Armada Rep Power: 16	370Z Sparco EVO3 Seats installed - pictures __________________ STILLEN G3 / F.I. TDX (NO RESONATORS) / F.I. LTH / UpRev Tuned / BC-Racing ER Coilovers / DIY Oil Cooler / Short Shifter

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
feeler: nismo seats for 40th seats	IgleeI	Parts for sale (Private Classifieds)	12	03-14-2011 11:01 PM
Seats	nissanztech	Parts for sale (Private Classifieds)	6	03-14-2011 07:32 PM
WTT Gray leather seats+Cash for Red 40th Seats	Econ	Wanted	1	02-27-2011 04:24 PM
WTT: Black Leather/Suede Seats and Cash - for - Red 40th Anniversary 370Z Seats	'10Anamoly	Parts for sale (Private Classifieds)	8	08-14-2010 10:42 PM
Can i swap the stock cloth seats for leather seats??	Will3212	Exterior & Interior	14	09-26-2009 12:09 AM

05-10-2011, 05:27 PM	#3 (permalink)
11blkZ Base Member Join Date: May 2011 Location: Honolulu, HI Posts: 27 Drives: 2011 370z black Auto Rep Power: 14	well i have the cloth seats...and if you feel down around mid thigh area, the sides of the seats (assuming the framing) is metal or really hard plastic....

05-10-2011, 05:30 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yah, there is metal down there. run a quick search 'sparco' 'bride' and you should see the threads people've done with swapping out to aftermarket seats.

05-10-2011, 05:34 PM	#5 (permalink)
11blkZ Base Member Join Date: May 2011 Location: Honolulu, HI Posts: 27 Drives: 2011 370z black Auto Rep Power: 14	are they a lot wider on the bottom?

05-10-2011, 05:37 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	not sure about wider but they talk about aftermarket seats. you'll have to try out the seats you like and get the rails for them.

05-10-2011, 07:00 PM	#8 (permalink)
11blkZ Base Member Join Date: May 2011 Location: Honolulu, HI Posts: 27 Drives: 2011 370z black Auto Rep Power: 14	are you thinking of changing them? It isn't that the seat is too snug...it is just that damn metal...almost like the padding is just too thin in that spot.

05-10-2011, 07:29 PM	#10 (permalink)
11blkZ Base Member Join Date: May 2011 Location: Honolulu, HI Posts: 27 Drives: 2011 370z black Auto Rep Power: 14	so those are bigger huh? Thanks for the information.

05-10-2011, 07:48 PM	#11 (permalink)
WhiskeyHotel Track Member Join Date: Nov 2009 Location: Oklahoma Posts: 530 Drives: 2015 GT-R PW Premium Rep Power: 17	Check out Corbeau also. The A4 wides look pretty good. Maybe not as well built as the others, but cheaper..

05-10-2011, 09:06 PM	#12 (permalink)
11blkZ Base Member Join Date: May 2011 Location: Honolulu, HI Posts: 27 Drives: 2011 370z black Auto Rep Power: 14	thanks man...the sparco's look like they are a little too wide for the car...not for me though lol...I will look and see on the corbeau's also.

05-11-2011, 01:31 PM	#14 (permalink)
11blkZ Base Member Join Date: May 2011 Location: Honolulu, HI Posts: 27 Drives: 2011 370z black Auto Rep Power: 14	I was reading the thread and it looked like they were a little big, is that right? Or do they fit in there just right?

06-10-2011, 12:55 PM	#15 (permalink)
11blkZ Base Member Join Date: May 2011 Location: Honolulu, HI Posts: 27 Drives: 2011 370z black Auto Rep Power: 14	what about just putting some seat covers over the stock seats to make more padding? Anyone tried this method? I read the thread on the leather seat covers that just go over the cloth, and then the padding there would be at least double...I would think that would help with making the seat more comfortable.