Lowered, now need to adjust headlights.

Leckie · 12-28-2014, 12:17 PM

Looked everywhere for a pic of the adjustment screw. The silver 8mm head with the large fender washer raises and lowers the aim on the headlight. I removed the wheel well liner for another reason, you can do it by removing a couple of the plastic fasteners as moving the liner out of the way.

Tadpole · 12-28-2014, 12:41 PM

You could also upgrade your hid bulbs to 5000k for brightness. This may offset for the height.

Shotta · 01-01-2015, 08:50 PM

Quote:

Originally Posted by Tadpole

You could also upgrade your hid bulbs to 5000k for brightness. This may offset for the height.

I don't think that would help him. The 5000k is just another color, not brighter and the cutoff will still be the same height no matter what bulb you put in there.

nis350 · 01-01-2015, 09:22 PM

Exactly. It has nothing to do with the aim of the headlight. The 5000k also has less usable light than the oem 4200-4300k.

Quote:

Originally Posted by Shotta

I don't think that would help him. The 5000k is just another color, not brighter and the cutoff will still be the same height no matter what bulb you put in there.

DanohKeo · 05-05-2015, 06:31 AM

Quote:

Originally Posted by Leckie

Looked everywhere for a pic of the adjustment screw. The silver 8mm head with the large fender washer raises and lowers the aim on the headlight. I removed the wheel well liner for another reason, you can do it by removing a couple of the plastic fasteners as moving the liner out of the way.

gonna attempt this tonight! I have the same issue except my brights dont even make a difference.

nis350 · 05-05-2015, 07:23 PM

Same here....and the Swift doesn't lower the front that much..

Quote:

Originally Posted by 370Z JT

I didn't notice a difference after my swifts.

Nick M · 05-06-2015, 08:03 AM

Quote:

Originally Posted by Shotta

I don't think that would help him. The 5000k is just another color, not brighter and the cutoff will still be the same height no matter what bulb you put in there.

Ditto. I would never run anything but the oem bulb in these projectors.

Swapping to a clear projector lense would brighten the lights quite a bit and sharpen the cutoff when adjusted/installed correctly.

edconline · 06-02-2015, 02:17 AM

That's for sure!

Sent from my 6+

filip00 · 11-09-2022, 02:44 AM

Didn't wanna dig up an old thread but makes more sense to reuse the old one than to start a new one....

So, after lowering my car, my headlights are aiming too low. Eibach springs are used lower 20mm in the back, 25mm in the front, meaning the angle of the car is now changed therefore the beams aim lower - regardless of the overall car height. (I am stating this because I see some people have trouble understanding this.....)

So, about the adjustment. I checked the pics and have consulted the FSM - it notes the screw to adjust this, but in the FSM - the screw is pictured to be accessible from under the hood. Is this a correct drawing or is this screw only accessible from within the wheel arch?

12-28-2014, 12:41 PM	#17 (permalink)
Tadpole A True Z Fanatic Join Date: Sep 2013 Location: Lockhart, TX Posts: 1,082 Drives: 13 Nissan 370Z A7 Rep Power: 18	You could also upgrade your hid bulbs to 5000k for brightness. This may offset for the height. __________________ Takeda TR3009P Short Ram Intakes, Custom Dual Exhaust, X-Piped with 18" Resonators & TopSpeed Axle Backs. EVO-R Led Third Foglight,

06-02-2015, 02:17 AM	#23 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 23	That's for sure! Sent from my 6+ __________________ View Journal Audio Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which struts will adjust back to stock ride height??!!!	Z2nv	Brakes & Suspension	10	01-05-2011 12:36 PM
How to Adjust the Timing for Automatic Front Headlights	cujo	Exterior & Interior	3	11-28-2010 02:44 AM
how to adjust ams short shifter??	Dan Z Man	Engine & Drivetrain	6	11-22-2010 09:59 PM
WTT: my PG painted headlights for your stock headlights	Cjanik	Parts for sale (Private Classifieds)	15	10-27-2010 02:28 PM
For those that are lowered..	B1nks	Brakes & Suspension	30	07-18-2010 04:50 PM

11-09-2022, 02:44 AM	#24 (permalink)
filip00 Track Member Join Date: May 2021 Location: slovenia Posts: 573 Drives: 370z pack Rep Power: 125428	Didn't wanna dig up an old thread but makes more sense to reuse the old one than to start a new one.... So, after lowering my car, my headlights are aiming too low. Eibach springs are used lower 20mm in the back, 25mm in the front, meaning the angle of the car is now changed therefore the beams aim lower - regardless of the overall car height. (I am stating this because I see some people have trouble understanding this.....) So, about the adjustment. I checked the pics and have consulted the FSM - it notes the screw to adjust this, but in the FSM - the screw is pictured to be accessible from under the hood. Is this a correct drawing or is this screw only accessible from within the wheel arch?