Thingys To Hold The Hood Up...

Red__Zed · 05-09-2011, 07:04 PM

Baer383 · 05-09-2011, 07:08 PM

Quote:

Originally Posted by kenchan

And you do realize that you're making up stories modshack and I had issues cause we didnt.

I believe I read in modshacks diy he had a issue with the back of the hood being slightly up b/c of the black covers,what I'm saying is where I put the ball I don't have that problem.

I tried it with the same front bracket you guys used in the same place you guys put it,and my hood was up a little bit in the back until I relocated the ball.

If you & modshack didn't have a problem then more power to you but if you read above SPOHN has the same front bracket as you and is relocating it to where I put mine hence "correcting other people's work".

kenchan · 05-09-2011, 07:10 PM

Yah it worked fine on my car.

only reason I took it off is im doing the CF battery/brake res covers soooon.

SPOHN · 05-09-2011, 07:19 PM

Ok. Let's go get a beer. Maybe two.

kenchan · 05-09-2011, 07:24 PM

Haha. baer u did a good job for watever you fixed. Install looks clean.

kenchan · 05-09-2011, 07:24 PM

Quote:

Originally Posted by SPOHN

Ok. Let's go get a beer. Maybe two.

Yah you can pay.

SPOHN · 05-09-2011, 07:26 PM

Quote:

Originally Posted by kenchan

Yah you can pay.

Cheaper than gas.

kellyefields · 05-09-2011, 07:32 PM

Hey guys I make these for guys here around the area. I fab a mounting bracket that attaches at the hood lift points therefor elimating pressure on the hood. There is no cutting only taking two bolts off where the hood attaches and place this bracket on there and then removing a plastic pop washer in the front of the battery/power steering cover. no cutting or drilling needed. I have a couple of these left over and willing to sell them for 60.00 plus shipping. PM me if interested and I can send you some pics.

SPOHN · 05-09-2011, 07:35 PM

Quote:

Originally Posted by kellyefields

Hey guys I make these for guys here around the area. I fab a mounting bracket that attaches at the hood lift points therefor elimating pressure on the hood. There is no cutting only taking two bolts off where the hood attaches and place this bracket on there and then removing a plastic pop washer in the front of the battery/power steering cover. no cutting or drilling needed. I have a couple of these left over and willing to sell them for 60.00 plus shipping. PM me if interested and I can send you some pics.

Any pics?

Lemers · 05-09-2011, 07:47 PM

Pics loose and installed would be great

theDreamer · 05-09-2011, 07:55 PM

Had the ones kenchan did his DIY with but I cannot move the mounting point & drill because I have the password jdm pieces. Since I could not move it my hood started to bulge which then I required me to take off the hood dampers.

kellyefields · 05-09-2011, 08:01 PM

I will post some pics tomorrow when I get off work. These should work with the JDM pieces as well. They do not interfere with those pieces. Please pm me and I will make sure you get those pics as well.

kenchan · 05-09-2011, 08:08 PM

Quote:

Originally Posted by kellyefields

I will post some pics tomorrow when I get off work. These should work with the JDM pieces as well. They do not interfere with those pieces. Please pm me and I will make sure you get those pics as well.

Slynky · 05-09-2011, 08:18 PM

Why PM secrecy...? Can't you just post them for everyone to see (who might be interested)?

kellyefields · 05-09-2011, 08:28 PM

no secret I just want to make sure that those that asked first have first dibs if they choose. I will be posting them in a for sale thread sometime tomorrow evening when I get off work.

05-09-2011, 07:19 PM	#49 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Ok. Let's go get a beer. Maybe two. __________________

05-09-2011, 07:47 PM	#55 (permalink)
Lemers A True Z Fanatic Join Date: Mar 2010 Location: Izmir, Turkey Posts: 15,371 Drives: 2012 Traverse LTZ Rep Power: 52	Pics loose and installed would be great __________________ 2010 Black Cherry Touring/Sport/Nav Now - 2012 Travese LTZ until I leave for Turkey

05-09-2011, 07:55 PM	#56 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Had the ones kenchan did his DIY with but I cannot move the mounting point & drill because I have the password jdm pieces. Since I could not move it my hood started to bulge which then I required me to take off the hood dampers. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

05-09-2011, 08:18 PM	#59 (permalink)
Slynky Track Member Join Date: Oct 2009 Location: McDonough, GA Posts: 595 Drives: 2010 Red 370Z T/S/N Rep Power: 17	Why PM secrecy...? Can't you just post them for everyone to see (who might be interested)? __________________ A veteran is someone who, at one point in their life, wrote a blank check made payable to "The United States of America," for an amount of "up to and including my life."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
can't find the other bolts that hold the rear spoiler	deolee	DIY Section (Do-It-Yourself)	7	01-02-2011 04:50 AM
How much power will the stock internals hold?	Mythic	Forced Induction	26	11-16-2010 06:14 PM
How well did your Black Z paint hold up?	Ry244	Nissan 370Z General Discussions	31	03-14-2010 08:45 PM
Hold out	Educ8r	Nissan 370Z Pricing / Ordering Discussions	8	01-09-2009 09:31 AM

05-09-2011, 07:04 PM	#46 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120

05-09-2011, 07:10 PM	#48 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Yah it worked fine on my car. only reason I took it off is im doing the CF battery/brake res covers soooon.

05-09-2011, 07:24 PM	#50 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Haha. baer u did a good job for watever you fixed. Install looks clean.

05-09-2011, 07:32 PM	#53 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 48 Posts: 1,156 Drives: Supercharged Rep Power: 17	Hey guys I make these for guys here around the area. I fab a mounting bracket that attaches at the hood lift points therefor elimating pressure on the hood. There is no cutting only taking two bolts off where the hood attaches and place this bracket on there and then removing a plastic pop washer in the front of the battery/power steering cover. no cutting or drilling needed. I have a couple of these left over and willing to sell them for 60.00 plus shipping. PM me if interested and I can send you some pics.

05-09-2011, 08:01 PM	#57 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 48 Posts: 1,156 Drives: Supercharged Rep Power: 17	I will post some pics tomorrow when I get off work. These should work with the JDM pieces as well. They do not interfere with those pieces. Please pm me and I will make sure you get those pics as well.

05-09-2011, 08:28 PM	#60 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 48 Posts: 1,156 Drives: Supercharged Rep Power: 17	no secret I just want to make sure that those that asked first have first dibs if they choose. I will be posting them in a for sale thread sometime tomorrow evening when I get off work.