3M DiNoc Carbon Fiber Wrap for engine hood how much?

2ndChance · 04-13-2011, 02:44 AM

Edit: NVM found exactly what I needed. http://www.youtube.com/watch?v=V99YF9vwNVU

I've installed myself many times the 3M DiNoc carbon fiber wrap in other cars.. great vinyl to work with but I couldn't find a size that could fit the 370z engine hood.

Have anyone Dinoc wrapped their hood? How much was needed? Im planning to do hood, roof, rear spoiler, door handles, A pillar, side mirrors and some interior parts.

kenchan · 04-13-2011, 02:26 PM

you need to get a custom size as 3M's standard rolls are 4ft wide.

measure your hood (just take a tape measurer, careful not to scratch your paint!) and add 2" each side for the wrap around and some excess you can pull.

talk to www.carbonfibergear.com for your custom size.

2ndChance · 04-13-2011, 08:15 PM

The 3M scotchprint 1080 roll is 60" wide, and the hood measured exactly 59" wide and 56" long.

I wanted to go with DiNoc because of the grey CF look, but given the hood size scotchprint is my only option, it doesn't look bad, in fact it has a more realistic CF look than the DiNoc but it is darker and less textured.

kenchan · 04-13-2011, 08:20 PM

Sounds like your gotta project coming.

Bluebatmobile · 04-14-2011, 11:26 AM

I carry Hexis if your interested.

B@t

04-13-2011, 02:44 AM	#1 (permalink)
2ndChance Base Member Join Date: Feb 2011 Location: Panama Posts: 240 Drives: like he stole it Rep Power: 199	3M DiNoc Carbon Fiber Wrap for engine hood how much? Edit: NVM found exactly what I needed. http://www.youtube.com/watch?v=V99YF9vwNVU I've installed myself many times the 3M DiNoc carbon fiber wrap in other cars.. great vinyl to work with but I couldn't find a size that could fit the 370z engine hood. Have anyone Dinoc wrapped their hood? How much was needed? Im planning to do hood, roof, rear spoiler, door handles, A pillar, side mirrors and some interior parts. Last edited by 2ndChance; 04-13-2011 at 03:15 AM.

04-14-2011, 11:26 AM	#5 (permalink)
Bluebatmobile The370Z.com Vendor Join Date: Nov 2008 Location: San Diego Posts: 934 Drives: 1997 Acura NSX Rep Power: 18	I carry Hexis if your interested. B@t __________________ email: bluebatmobile@san.rr.com custom vinyl overlays: WWW.BLUEBATOVERLAYS.COM facebook:https://www.facebook.com/groups/bluebatoverlays/ @bluebatoverlays on IG

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber Hood question	drisko	Exterior & Interior	20	06-10-2010 12:44 AM
3M DINOC Carbon Vinyl Wrap	spearfish25	Exterior & Interior	10	12-12-2009 10:50 PM
Carbon Fiber Hood + Hatch	SpawnAeroJohn	Exterior & Interior	45	10-22-2009 07:37 PM
carbon fiber hood and trunk question	thispecialk	Exterior & Interior	6	07-16-2009 11:15 PM
Carbon Fiber Hood	Jammer8	Exterior & Interior	10	06-21-2009 03:11 PM

04-13-2011, 02:26 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	you need to get a custom size as 3M's standard rolls are 4ft wide. measure your hood (just take a tape measurer, careful not to scratch your paint!) and add 2" each side for the wrap around and some excess you can pull. talk to www.carbonfibergear.com for your custom size.

04-13-2011, 08:15 PM	#3 (permalink)
2ndChance Base Member Join Date: Feb 2011 Location: Panama Posts: 240 Drives: like he stole it Rep Power: 199	The 3M scotchprint 1080 roll is 60" wide, and the hood measured exactly 59" wide and 56" long. I wanted to go with DiNoc because of the grey CF look, but given the hood size scotchprint is my only option, it doesn't look bad, in fact it has a more realistic CF look than the DiNoc but it is darker and less textured.

04-13-2011, 08:20 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Sounds like your gotta project coming.