CarbonSignal Interior 11 piece Carbon fiber kit

docaam · 09-26-2011, 01:57 PM

Quote:

Originally Posted by kellyefields

Look at what I got today! installation was easy. had to remove the tach ring by lifting up on the center cover and removing two screws to put this cover in place and then replace the screws without loosing them in the dash but it only took 5 min to do then the shift ring I had to remove the factory one and replace with the carbon fiber one but again 5 min to do. I did however have to go out and purchase some double sided tape since it was not in the kit to hold the two pieces beside the tach ring but otherwise the kit is awesome to look at and fit is spot on. even better than the pictures show. It matches great with the steering wheel I purchased from tony a few months back. All in all I am very pleased with the product and the fit is almost factory finish especially since it basically snaps in place over everything. More pics are in my photo album if anyone wants to see.

Nice Job AJ

Looks sick!! I live the silver touch on head unit part.

Why don't you get GTR start button?

Quote:

Originally Posted by scottIN

Since you got the red...

How would it look in a red car? It's always hard to tell from a pic / monitor if it's close or not.

I did this in my red but I contrast it will red piping and red stitching on my interior some pictures are there in my albums

kellyefields · 09-26-2011, 02:19 PM

[QUOTE=docaam;1330021]Looks sick!! I live the silver touch on head unit part.

The silver was part of a dash kit I got 80 bucks i think. Did not like all of the pieces they sent but did like the parts for the head unit and around the nav buttons and around the seat heater buttons because the all black made everything blend in to much.

Why don't you get GTR start button?

Quit giving me ideas, I was thinking the same thing and now that you say it just reinforces the thought.

KaienZ34 · 09-26-2011, 02:30 PM

Hot hot, another great job by Carbon Signal...

ddvette9 · 09-26-2011, 03:15 PM

Look Good Kelly. Was sitting in Family Law checking it out. Can't wait to see it when we meet up the next time in Tampa when I come home over break

hyunsoo1803 · 09-26-2011, 05:14 PM

Somebody should do a quick DYI for this kit

370ZNISMO#704 · 09-26-2011, 06:15 PM

Quote:

Originally Posted by hyunsoo1803

Somebody should do a quick DYI for this kit

370ZNISMO#704 · 09-26-2011, 06:17 PM

I'm going to pick mine up now from FedEx sweet dicks ......

Fly1 Motorsports · 09-26-2011, 06:20 PM

Quote:

Originally Posted by hyunsoo1803

Somebody should do a quick DYI for this kit

+1...

AdamX · 09-26-2011, 06:55 PM

i want my kit so bad..

370ZNISMO#704 · 09-26-2011, 06:58 PM

Quote:

Originally Posted by AdamX

i want my kit so bad..

Just wait from what kellys car looks like and what he said about the kit it will be worth the wait..

christian370z · 09-26-2011, 09:41 PM

Quote:

Originally Posted by CarbonSignal

Congrats sir, glad you happy with our product,

But just to clarify, we didn't provide double tap, cause some of the parts will just clip on, and the rest we recommend to have them fitted with silicon, simply cause the fittment of our products is soo tight that a double tape might show a slight gap.

Thank you for your business.

B.R
Naj

Hey Naj, does the tachometer bezel just slip on then? Also, my kit was delivered to my mailbox but I didn't get out of class early enough to pick it up. I will grab it first thing tomorrow and will install it shortly after!

kellyefields · 09-26-2011, 10:43 PM

Quote:

Originally Posted by christian370z

Hey Naj, does the tachometer bezel just slip on then? Also, my kit was delivered to my mailbox but I didn't get out of class early enough to pick it up. I will grab it first thing tomorrow and will install it shortly after!

I dont want to step on Naj but I can help answer this. the bezel to get in on because of steering wheel cover on the back the plastic is so close I could not slip it on. So I lifted the plastic cover that covers the tach which will pop up with little effort and saw two screws on the top of the bezel. I removed them being careful not to drop them into the dash and just pulled the factory bezel cover off and then put the carbon fiber piece over it and then put it all back in replacing the two screws. It is a tight fit and it will hold itself in place. I am not sure if you can remove the black cover behind the steering wheel but if you can you would be able to put the cover on without the removal of the screws. everything in the kit is such a tight fit that it remains in place with no issues. the only part that I can see you using the silcone like Naj said is the two pieces that go over the buttons on the cluster. I just used a thin double sided tape to ensure they dont come off when driving and fall out of the car just as a piece of mind. But again the fit is so tight this would be a slim possibility. I just thought better save than sorry.

370ZNISMO#704 · 09-27-2011, 12:38 AM

Wow my kit looks great... Pics up soon.

CarbonSignal · 09-27-2011, 02:02 AM

Quote:

Originally Posted by christian370z

Hey Naj, does the tachometer bezel just slip on then? Also, my kit was delivered to my mailbox but I didn't get out of class early enough to pick it up. I will grab it first thing tomorrow and will install it shortly after!

Quote:

Originally Posted by kellyefields

I dont want to step on Naj but I can help answer this. the bezel to get in on because of steering wheel cover on the back the plastic is so close I could not slip it on. So I lifted the plastic cover that covers the tach which will pop up with little effort and saw two screws on the top of the bezel. I removed them being careful not to drop them into the dash and just pulled the factory bezel cover off and then put the carbon fiber piece over it and then put it all back in replacing the two screws. It is a tight fit and it will hold itself in place. I am not sure if you can remove the black cover behind the steering wheel but if you can you would be able to put the cover on without the removal of the screws. everything in the kit is such a tight fit that it remains in place with no issues. the only part that I can see you using the silcone like Naj said is the two pieces that go over the buttons on the cluster. I just used a thin double sided tape to ensure they dont come off when driving and fall out of the car just as a piece of mind. But again the fit is so tight this would be a slim possibility. I just thought better save than sorry.

Thanks kellyefields

What I can suggest for the installation is:

window switch, three hats and two small pieces behind the speedo should be installed with very little silicone as it can be removed later on . We suggest to put silicone mainly on the corners,

Gear shifter: manual has such good fitment it can be simply replaced with the stock one or on top of stick without any silicone, same goes for the auto but should be on the stock one and if needed some silicone.

Tachmeter cover can be done easily as kelly suggested by lifting the top cover, you need to push the lower edge behind the steering wheels cover though. It better if you can lift the steering cover a small part to slide the bezel in. If someone wants adventure then you can open the cover behind the steering wheel, the screws can be open from down but two other covers needed to be removed. All will take maximum 10 minutes. We suggest to put very little silicone one on top and two on the side

the whole kit should take 15-20 minutes of installation time and first timers should be able to do it easily.

Calvin · 09-27-2011, 02:48 AM

how much is the gear shifter ?

09-26-2011, 02:19 PM	#347 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 48 Posts: 1,156 Drives: Supercharged Rep Power: 17	[QUOTE=docaam;1330021]Looks sick!! I live the silver touch on head unit part. The silver was part of a dash kit I got 80 bucks i think. Did not like all of the pieces they sent but did like the parts for the head unit and around the nav buttons and around the seat heater buttons because the all black made everything blend in to much. Why don't you get GTR start button? Quit giving me ideas, I was thinking the same thing and now that you say it just reinforces the thought. __________________ MY 2009 SC BUILD.

09-26-2011, 02:30 PM	#348 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	Hot hot, another great job by Carbon Signal... __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

09-26-2011, 05:14 PM	#350 (permalink)
hyunsoo1803 Track Member Join Date: Mar 2010 Location: Canada Posts: 556 Drives: 370z Rep Power: 16	Somebody should do a quick DYI for this kit __________________ \|Stillen\|KW\|Volks\|Evo-R\|Bridgestone\|Hotchikis\|Project Kics\|Southbend\|Berk\|Status\|Innovate\|Nismo\|Greddy\|

09-26-2011, 06:17 PM	#352 (permalink)
370ZNISMO#704 Enthusiast Member Join Date: Nov 2010 Location: Seattle Posts: 466 Drives: Nismo10,EgH22,TSX04 Rep Power: 14	I'm going to pick mine up now from FedEx sweet dicks ...... __________________ 2010NISMO•305.9whp 250tq Osirus•STANCE GR+•and Camber & Toe bars•KICS R 20mm•VOSSEN CV3 20"-10.5x4•Stillen GENIII•AAM S-Line Nimso mid-pipe•CarbonSignal Sponsored car•EVOR F1mirrors•NST short shifter•Zspeed Nismo under tray.

09-27-2011, 12:38 AM	#358 (permalink)
370ZNISMO#704 Enthusiast Member Join Date: Nov 2010 Location: Seattle Posts: 466 Drives: Nismo10,EgH22,TSX04 Rep Power: 14	Wow my kit looks great... Pics up soon. __________________ 2010NISMO•305.9whp 250tq Osirus•STANCE GR+•and Camber & Toe bars•KICS R 20mm•VOSSEN CV3 20"-10.5x4•Stillen GENIII•AAM S-Line Nimso mid-pipe•CarbonSignal Sponsored car•EVOR F1mirrors•NST short shifter•Zspeed Nismo under tray.

09-26-2011, 03:15 PM	#349 (permalink)
ddvette9 Track Member Join Date: May 2009 Location: Florida Posts: 823 Drives: 2013 Scion FRS Rep Power: 17	Look Good Kelly. Was sitting in Family Law checking it out. Can't wait to see it when we meet up the next time in Tampa when I come home over break

09-26-2011, 06:55 PM	#354 (permalink)
AdamX Base Member Join Date: Mar 2011 Location: Freehold,NJ Posts: 164 Drives: 09 370Z PW 7AT Rep Power: 14	i want my kit so bad..

09-27-2011, 02:48 AM	#360 (permalink)
Calvin A True Z Fanatic Join Date: Aug 2009 Location: Castro Valley, CA Age: 34 Posts: 1,418 Drives: 4GS, R8v10 Rep Power: 18	how much is the gear shifter ? __________________ BUILD THREAD SPONSORED BY: SPEEDELEMENT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WORK Wheels * Super Clearance * 2 Piece / 3 Piece ***	RavSpec	Tires/Wheels	14	05-02-2011 11:38 PM
WORK Wheels * Super Clearance * 2 Piece / 3 Piece ***	RavSpec	RavSpec - JDMwheel	1	04-11-2011 06:38 PM
CarbonSignal in the house.	CarbonSignal	New Forum Member	34	01-26-2011 10:43 AM
Who can wrap an interior piece for me in real CF?	NewYorkJon34	Exterior & Interior	5	07-29-2010 05:31 PM