CarbonSignal Interior 11 piece Carbon fiber kit

metz

I think the term overlay has everyone thinking of the cheesy stick on dash kits that are like paper. What Im getting that they are saying is they are basically making a mold of a part and form fitting a piece for it, this piece will be stuck down. As someone who has worked with carbon fiber many times, this is exactly how I would do the gauge "hats" since they are not readily removeable. Its basically the same as "wrapping" say the switch plates, since its nothing more than a piece of carbon fiber resined onto the plastic then floodcoated and finished. Only this is taped down rather than resined in place. Its no different than the fang overlay that everyone uses, a hardened piece of CF form fitting.
Now someone from Carbon Signal correct me if Im offbase here.

CarbonSignal

you are right on the spot3m tape will be used only on window bezels rest no need for anything they will just clip on.

__________________

AdamX

clip on sounds good!!!!!

JordoKAP

Do you guys have a photo of an interior with all pieces installed?

kenchan

Yah, most definitely.

ZedSled

Ill take the 3 hats, window bezels, instrument cluster, mirror covers. These are looking pretty sweet!

kenchan

Can't wait for my hats.

KaienZ34

??? I don't think carbon signal is making those.

__________________

Joebarchuck

I would be in if it was not stick on. Not sure I understand why it would be much harder to make parts that replace the OEM part. Stick on add thickness to the parts and look amateurish which I would accept if I was doing it myself but paying for amateurish look makes no sense to me. Too bad as this would look really good.

__________________
Red 2010 370Z Roadster: Stillen G3, Stillen Exhaust, Up-Rev Tune (312 RWHP), Eibach Pro Springs, 20mm spacers front and back, Rear Camber Kit, Tinted Windows, GT-R Start Button, Interior Mods

kenchan

joebarchuck - parts like the door switch has more than just a plain flat piece with contour. if you look inside, it has to have snap feature, be able to hold the mechanical switch modules, etc. it's quite 3 dimensional.... so it's more involved and would cost too much $$$ to replace the entire thing from the core.

plus warranty is going to be tough cause some folks push/pull on the switches pretty damn hard and it can break the CF trim entirely.

next best is to wrap the existing factory bits in CF...which you've seen vendors here do.

then this current overlay approach with no down time.

A.J@CarbonSignal

You might be seeing the outter picture of these interior parts but if you look closely to the inside of some parts like the door switch its quite complicated to replace the whole thing, not worth the money/time and not to mention they can be broken easily if not removed carefully. Will try to post a picture of some OEM interior part which we have apart to show what I mean.

BTW, we are almost done with the first set of CF interior kit and should have installed/finished product pictures in a few days.

__________________

kenchan

Wooot!

Joebarchuck

Hi guys, I guess my post stirred some dirt and it was not my intention. I was not criticizing the people choosing to go this route nor the company making these parts.

I understand the labor required to make the equivalent of the OEM part and I myself would go the route to have the OEM part either painted or CF wrapped. Now that's me and I respect all others who prefer what Carbon Signal has to offer.

__________________
Red 2010 370Z Roadster: Stillen G3, Stillen Exhaust, Up-Rev Tune (312 RWHP), Eibach Pro Springs, 20mm spacers front and back, Rear Camber Kit, Tinted Windows, GT-R Start Button, Interior Mods

kenhdcgov

Ok, Ok, I am sold, just tell me how soon I can older and how?? Sign me Today as in right this moment!! I have truly been searching for severl of the parts in this kit!! Look out here I come. Don't make me have to hunt you down!! ROFL & CGU!!!

__________________
DARKSDE

kenhdcgov

BTW, Joebarchuck, I have several snap and paste on interior CF pieces in place and they are the sbolute "bomb". You cannot tell they it's not OEM!! Just us, my brother before it's too late!!!

__________________
DARKSDE