Lets see your aftermarket seats!

FireDan50 · 05-20-2015, 07:26 AM

I went down to a local hardware store and got the strongest stuff they had in different lengths...I found the ones I needed but forget the size :P

chops · 05-20-2015, 10:44 PM

Quote:

Originally Posted by dP3NGU1N

Quick question for everyone else; what kind of bolts did you guys buy to attach the side mounts to the slide brackets?

i would use the strongest bolts available. the stock bolts that bolt your seat to the car are metric, grade 10.9. most bolts sold at autozone or kragen...etc will be grade 8.8 which can break. with that said, i was able to find grade 10.9 bolts at orchard supply hardware for a reasonable price. used them for everything

dP3NGU1N · 05-20-2015, 10:48 PM

Quote:

Originally Posted by chops

i would use the strongest bolts available. the stock bolts that bolt your seat to the car are metric, grade 10.9. most bolts sold at autozone or kragen...etc will be grade 8.8 which can break. with that said, i was able to find grade 10.9 bolts at orchard supply hardware for a reasonable price. used them for everything

The Autozone near me actually has a decent selection of 10.9 grade bolts, which is what I'm using right now. However, the heads are every so SLIGHTLY too large and run into the bottom of the seat at its lowest setting (which is what I need it to be at in order to fit with helmet.) So I'm on the hunt for 10.9 grade bolts that are a bit lower profile.

Realale · 07-01-2015, 10:48 AM

carlitos_370z · 07-01-2015, 10:55 AM

WAOOOOO just WAOOOOOOOOO!!!

awesome seats dude!

Realale · 07-01-2015, 11:49 AM

Quote:

Originally Posted by carlitos_370z

WAOOOOO just WAOOOOOOOOO!!!

awesome seats dude!

Thanks 👍🏻

theDreamer · 07-02-2015, 10:02 AM

Recaro CS Sporster seats?
Any details on fitment (width & height), lower than stock or higher, comfort versus snug.

bullitt5897 · 07-02-2015, 10:54 AM

Quote:

Originally Posted by theDreamer

Recaro CS Sporster seats?
Any details on fitment (width & height), lower than stock or higher, comfort versus snug.

Same height as stock... maybe a little higher..

Width is fine just deeper with the side bolsters.

Comfort... Blows stock seats out of the water...

I am 6'2 and my wife is 5'2 and both of us love the seats...

Realale · 07-02-2015, 11:55 AM

Yup seat sits a tad lower to the ground but your seating height is a tad taller than stock. Seats hug all around. Padding is a bit stiffer than stock but it could just be because there new.

tommyguns · 07-08-2015, 01:07 PM

Just ordered the EVO II US with the Buddy Club mount. Can anyone advise me on the wiring for the air bag light and also if anyone has used the Sparco side mounts with the Buddy Club system(like the look of the Sparco rails). It looks like I will have to either notch the Sparco side rail to accommodate the tab on the BC for the seat belt or remove the tab completely and have something fabricated. I haven't ordered the side rails yet, so if it's not possible to incorporate the two please let me know so I can avoid the restocking fee. Thanks

mag_black · 07-08-2015, 01:16 PM

Quote:

Originally Posted by Realale

( Click to show/hide )

Those seats look so good. Nice!!!

mag_black · 07-08-2015, 01:20 PM

I need to change my door panels to black alcantara at some point.

Exhaust · 07-08-2015, 02:06 PM

Subbed

synolimit · 08-28-2015, 12:28 PM

And time for more parts! Quick release steering wheel.

Planted base
Planted aluminium risers
10.9 bolts
OMP RS-PT 2

FairladyZ10PG · 08-28-2015, 12:35 PM

Quote:

Originally Posted by Realale

I want your seats!

05-20-2015, 07:26 AM	#481 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	I went down to a local hardware store and got the strongest stuff they had in different lengths...I found the ones I needed but forget the size :P __________________ VSR Single-turbo kit: 611hp/517tq @ 10psi (Q16 race gas) Dan's VSR top-mount turbo 370z

07-01-2015, 10:48 AM	#484 (permalink)
Realale Track Member Join Date: Apr 2012 Location: West Covina, CA Posts: 515 Drives: 2012 PW 370Z Nismo Rep Power: 14	FairladyZ10PG, David Parra, swiss370Z and 6 others like this.

07-01-2015, 10:55 AM	#485 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	WAOOOOO just WAOOOOOOOOO!!! awesome seats dude! StiKiller_12 likes this.

07-02-2015, 10:02 AM	#487 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Recaro CS Sporster seats? Any details on fitment (width & height), lower than stock or higher, comfort versus snug. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

07-02-2015, 11:55 AM	#489 (permalink)
Realale Track Member Join Date: Apr 2012 Location: West Covina, CA Posts: 515 Drives: 2012 PW 370Z Nismo Rep Power: 14	Yup seat sits a tad lower to the ground but your seating height is a tad taller than stock. Seats hug all around. Padding is a bit stiffer than stock but it could just be because there new. FairladyZ10PG likes this.

07-08-2015, 01:07 PM	#490 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 65 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 17	Just ordered the EVO II US with the Buddy Club mount. Can anyone advise me on the wiring for the air bag light and also if anyone has used the Sparco side mounts with the Buddy Club system(like the look of the Sparco rails). It looks like I will have to either notch the Sparco side rail to accommodate the tab on the BC for the seat belt or remove the tab completely and have something fabricated. I haven't ordered the side rails yet, so if it's not possible to incorporate the two please let me know so I can avoid the restocking fee. Thanks __________________ 09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG

07-08-2015, 01:20 PM	#492 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	I need to change my door panels to black alcantara at some point. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

07-08-2015, 02:06 PM	#493 (permalink)
Exhaust Enthusiast Member Join Date: Mar 2015 Location: Nowhere Posts: 277 Drives: 2015 AT GM Z Rep Power: 25	Subbed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aftermarket seats with heaters	TBOX	Exterior & Interior	1	03-27-2011 11:52 AM
Lets re-think about parking too far away..	LuckyJinx	Nissan 370Z General Discussions	83	01-10-2011 08:54 AM
Lets have some laughs	RiCharlie	Nissan 370Z General Discussions	81	11-25-2010 09:50 AM
aftermarket seats / height	konsol	Nissan 370Z General Discussions	2	02-11-2010 10:37 AM
For anyone planning aftermarket seats (Sparco, Recaro etc)..LA Peeps Please read..>	Modshack	Exterior & Interior	7	05-11-2009 09:31 AM