Lets see your aftermarket seats!

fuct · 01-20-2012, 12:46 PM

damn those red Brides are s3x!!!!!!!!!

KamiSpeed · 01-20-2012, 02:44 PM

Quote:

Originally Posted by fuct

damn those red Brides are s3x!!!!!!!!!

quote?

Calvin · 01-20-2012, 03:39 PM

Quote:

Originally Posted by Amuse370z

They were made for your car! Matches the exterior colour like no other!

lol yaaa i know!!

Quote:

Originally Posted by Juruki

^^ the top secret rear bar would match your seats very well

or the amuse one also xP i love them both but kinda pricey >_<

TLSpeed · 01-20-2012, 07:44 PM

Was really stoked on the STATUS seats, but not sure how well their version of tan would match my tan interior. May have to just go black, problem with that is I only plan on getting, and only want, one bucket. I know that goes against the show car mentality but Im not buying a seat to be pretty

Functionality FTW

Desicions......Desicions....

Gixxer-370Z · 01-20-2012, 07:45 PM

Quote:

Originally Posted by fuct

damn those red Brides are s3x!!!!!!!!!

couldn't agree more...and they feel like it too. I had the pleasure of sitting in his car at the last Coffee and Cars meet.

I want...

kchu221 · 01-20-2012, 07:56 PM

this question is for people with red seat... how fast does your red seats get dirrt??

Volk Z · 01-24-2012, 03:11 PM

I had Corbeau FX1 pro in my 350Z.... After about an hour of driving my A$$ was killing me...

I have no problem spending the money but would the Bride or Status fixed back seat have any better cushioning? My wife hated the seats as well for long drives.

I need a small seat so the Status Ring or Bride Zeta III i like the best...

cycy89 · 02-22-2012, 04:20 PM

im getting a bucket and planning on using my stock seatbelt, but there's no way to mount the lock for the seatbelt. im getting a harness and harness bar eventually but not at the moment. any suggestions?

Volk Z · 02-22-2012, 11:38 PM

Quote:

Originally Posted by cycy89

im getting a bucket and planning on using my stock seatbelt, but there's no way to mount the lock for the seatbelt. im getting a harness and harness bar eventually but not at the moment. any suggestions?

I can tell you first hand you sure can use your stock seat belt... It unbolts off the stock seat and I can tell you the buddy club sliders and corbeau have a welded on piece that the stock seat belt bolts onto.

I rocked my stock seat belts so your good to go with those slider brackets. And I am 99 percent sure the bride, nagisa and sparco brackets have welded on mounts for the stock seat belt.

Hope that helps brotha!

cycy89 · 02-23-2012, 08:58 AM

Quote:

Originally Posted by Volk Z

I can tell you first hand you sure can use your stock seat belt... It unbolts off the stock seat and I can tell you the buddy club sliders and corbeau have a welded on piece that the stock seat belt bolts onto.

I rocked my stock seat belts so your good to go with those slider brackets. And I am 99 percent sure the bride, nagisa and sparco brackets have welded on mounts for the stock seat belt.

Hope that helps brotha!

Thanks that really helps!

Perf.Des · 02-23-2012, 12:52 PM

I have Bride rails, and yes, the tab is is there to bolt your stock seat belt to them.

Volk Z · 02-23-2012, 10:17 PM

Quote:

Originally Posted by cycy89

Thanks that really helps!

Just an FYI be weary of which brackets you get! My corbeau brackets put my head close to the roof and i am 5'8!!

The buddy club rails put me back down to stock maybe a hair lower, the nagisa will do the same and put it lower as they are both side mount brackets.

Bride makes a rail that sits a little lower im not sure the height compared to stock....

Good luck man

cycy89 · 02-23-2012, 10:38 PM

Quote:

Originally Posted by Volk Z

Just an FYI be weary of which brackets you get! My corbeau brackets put my head close to the roof and i am 5'8!!

The buddy club rails put me back down to stock maybe a hair lower, the nagisa will do the same and put it lower as they are both side mount brackets.

Bride makes a rail that sits a little lower im not sure the height compared to stock....

Good luck man

Thanks!
I put the seat in without a bracket just to see the height, it was pretty comfortable. I hope the bracket doesn't add too much to it. Idk the brand of that bucket im going to get, but it's the lightest I could find.

Volk Z · 02-27-2012, 02:56 PM

Quote:

Originally Posted by cycy89

Thanks!
I put the seat in without a bracket just to see the height, it was pretty comfortable. I hope the bracket doesn't add too much to it. Idk the brand of that bucket im going to get, but it's the lightest I could find.

If you go with a wedge engineering or corbeau bracket/slider that goes underneath the seat be ready to be sitting on a highchair... if You dont get side mounted brackets for the seat its going to be high...

I think the Bride Lo-max with the low bracket would be one of the few exceptions to this rule.

Good luck... I hope you didnt go to cheap with the seats... No name brands are not worth the extra cash savings...

kkruel55 · 02-27-2012, 05:56 PM

Does anyone in the Houston area have a Status Ring GT? I would like to test sit one. :-)

01-24-2012, 03:11 PM	#187 (permalink)
Volk Z A True Z Fanatic Join Date: Aug 2011 Location: Laguna Beach, CA Posts: 2,214 Drives: Nismo Z Rep Power: 3066	I had Corbeau FX1 pro in my 350Z.... After about an hour of driving my A$$ was killing me... I have no problem spending the money but would the Bride or Status fixed back seat have any better cushioning? My wife hated the seats as well for long drives. I need a small seat so the Status Ring or Bride Zeta III i like the best... __________________ AMUSE * TOMEI * STILLEN * CRAFTSQUARE RECARO * 3M * TOP SECRET * SLICKCARBON

02-22-2012, 04:20 PM	#188 (permalink)
cycy89 A True Z Fanatic Join Date: Jun 2011 Location: 120mph somewhere Posts: 1,097 Drives: #TTURBOZ Rep Power: 30	im getting a bucket and planning on using my stock seatbelt, but there's no way to mount the lock for the seatbelt. im getting a harness and harness bar eventually but not at the moment. any suggestions? __________________ Fast Intentions Twin Turbo Kit GT2860RS, 677WHP\|FI 34 row oil cooler\|F.I. CBE\|Fast 500E return fuel system\|FI trans cooler\|FI billet aluminum flex plate\|Excedy clutch packs\|ENKEI RP03\|BC BR coilovers\|SEIBON Carbon\|EVO-R Rear fog light\|GTR push start\|Whiteline sway bars, Diff bushing\|DSS axles\|ECUTekW/FlexFuelTune

02-23-2012, 12:52 PM	#191 (permalink)
Perf.Des Base Member Join Date: Apr 2011 Location: Madison, WI Posts: 220 Drives: 2009 370Z Touring Rep Power: 14	I have Bride rails, and yes, the tab is is there to bolt your stock seat belt to them. __________________ Perf.des carbon and paint//Bride//Personal//Stillen//ARK//Jegs//Zex//RUFF//Eibach

02-27-2012, 05:56 PM	#195 (permalink)
kkruel55 Base Member Join Date: Jan 2010 Location: Houston, TX Posts: 206 Drives: '10 370Z Black M6 Rep Power: 15	Does anyone in the Houston area have a Status Ring GT? I would like to test sit one. :-) __________________ 2010 Magnetic Black Coupe 6 speed-- Powerhouse Amuse//AP Racing//Volk Racing//Stillen//Tein//SPC//Hotchkis//INGS+1//MRWorks//Fast Intentions

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aftermarket seats with heaters	TBOX	Exterior & Interior	1	03-27-2011 11:52 AM
Lets re-think about parking too far away..	LuckyJinx	Nissan 370Z General Discussions	83	01-10-2011 08:54 AM
Lets have some laughs	RiCharlie	Nissan 370Z General Discussions	81	11-25-2010 09:50 AM
aftermarket seats / height	konsol	Nissan 370Z General Discussions	2	02-11-2010 10:37 AM
For anyone planning aftermarket seats (Sparco, Recaro etc)..LA Peeps Please read..>	Modshack	Exterior & Interior	7	05-11-2009 09:31 AM

01-20-2012, 12:46 PM	#181 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	damn those red Brides are s3x!!!!!!!!!

01-20-2012, 07:44 PM	#184 (permalink)
TLSpeed Base Member Join Date: Jan 2012 Location: Red Deer Posts: 11 Drives: 09 370Z Sport 6M MB Rep Power: 13	Was really stoked on the STATUS seats, but not sure how well their version of tan would match my tan interior. May have to just go black, problem with that is I only plan on getting, and only want, one bucket. I know that goes against the show car mentality but Im not buying a seat to be pretty Functionality FTW Desicions......Desicions....

01-20-2012, 07:56 PM	#186 (permalink)
kchu221 Enthusiast Member Join Date: Aug 2011 Location: torrance Posts: 391 Drives: 2012 BMW M3 E92 Rep Power: 14	this question is for people with red seat... how fast does your red seats get dirrt??