???? :wtf2:

Should be in the tech area.. but just curious of how some if you eliminated the SRS light. I know theres something around about a resistor.. are there any plug and play applications?


Sent from my iPhone using Tapatalk

did you google this by chance?

http://www.the370z.com/diy-section-d...light-fix.html

Look what we just got in!

Bride Stradia II Japan Venus Edition

(A couple of raw shots)
https://c1.staticflickr.com/9/8600/3...357928f6_c.jpg
https://c5.staticflickr.com/6/5502/2...419319c1_c.jpg
https://c8.staticflickr.com/6/5723/2...dea2b3fd_c.jpg

Yes, but I was curious if there was any applications i could purchase.


Sent from my iPhone using Tapatalk

like a plug and play aftermarket seat?

why do people care so much about a light on the dash?

There are not.

If I weren't so lazy, I'd buy a bunch of resistors and try to make plugs that would trick the car. I'm fairly certain the car uses simple checks on resistances to see if there's something there and what state it's in, for both the weight sensor and the airbag. Could probably even make a little bit with a switch on the passenger side to toggle between loaded and unloaded states.
Furthest I've gotten was buying the necessary resistors though. And those are sitting in a little baggie on my windowsill to this day. (it's been a year now).

Honestly, I tried this and it didn't work for me.

Recaro pole positions on Recaro sliders and Planted seat bracket. not a super low seating positon

http://i866.photobucket.com/albums/a...746C919256.jpg
http://i866.photobucket.com/albums/a...EB6D988B02.jpg

my favorites seats by far :drool:

Juke Recaro Sportster CS in a 2011 Nismo

Not the best pics, were the first ones I took.
http://www.the370z.com/members/2011-...204-112114.jpg

http://www.the370z.com/members/2011-...204-112042.jpg

Much cutting down and welding was needed to get the seat as low down as possible. I feel it still sits a little high but there is not getting it lower and I wanted to keep the sliding rails.

I have a Sparco Evo II US and Wedge Engineering bracket. I had to get rid of the slider and mount it directly to bracket to get it low enough for my 6'1" frame! No one else drives the car so I don't care about the slider!

You know, I might consider doing the same and taking out the slider. It would be nice to sit an inch lower..

Does anyone have figment information on the Braum and the Cipher Auto seats?

I'm 6'-3, and can't exactly have a seat that sits higher than stock.