Lets see your aftermarket seats!

leighspped · 10-15-2012, 08:29 AM

Quote:

Originally Posted by king12sky

Reclinable or non reclinable is my dilemma.

Well what are u going to use te car for? I'm switching from my recaro's that recline to single bucket seat because it going more track only.... If its most a dd atleast get ur passenger a recliner they will thank you

kevr6 · 11-15-2012, 10:22 PM

My Sparco seats

FireDan50 · 12-22-2012, 11:19 AM

Here's an update to my seats: I pulled out the fixed back Sparco Pro 2000 seats and installed Bride adjustables and Takata Drift II harnesses. I had the Drift IIIs at first, but the IIs just work better/easier for me. I chose these harnesses because I wanted Takata's that are street legal in Europe and the US. I also took out the OEM bar in the back and installed Robispec's chassis/harness bar, which I wrapped the Takata's around.

Drift II on left / Drift III on right

kchu221 · 12-22-2012, 11:36 AM

Quote:

Originally Posted by firedan50

here's an update to my seats: I pulled out the fixed back sparco pro 2000 seats and installed bride adjustables and takata drift ii harnesses. I had the drift iiis at first, but the iis just work better/easier for me. I chose these harnesses because i wanted takata's that are street legal in europe and the us. I also took out the oem bar in the back and installed robispec's chassis/harness bar, which i wrapped the takata's around.

drift ii on left / drift iii on right

nice!

Bandit_Kaine · 12-31-2012, 06:33 PM

If I get bride stradia ii and bride RO rails how much lower than stock will it be? Also stock seat belt will work? And last question, does seat have any adjustability besides the back?

Volk Z · 01-17-2013, 09:33 PM

Quote:

Originally Posted by Bandit_Kaine

If I get bride stradia ii and bride RO rails how much lower than stock will it be? Also stock seat belt will work? And last question, does seat have any adjustability besides the back?

I believe for the stradia you will need MO-rails as they go with stradia and gias. They should be similar or lower then stock height.

I would hope firedan50 above could chime in on height compared to stock... Also if he is using MO-rails

gozfast · 01-18-2013, 06:57 AM

I have the Bride Stradia II Sport's with the bride rails and they are 1.25" lower than stock. They weigh exactly the same as the stock seats and rails by the way, and make sure you don't have more than a 32" waist. They hold you in place great though, and the thigh bolsters aren't annoyingly large like the Gias. Only the back adjusts for tilt, no other adjustments, and the rails slide of course front to back. I purchased mine thru RavSpec and I got the RO rails.

Fly1 Motorsports · 01-18-2013, 06:45 PM

I threw on some Cipher Auto seats before SEMA. Not bad considering the price point ($700-800/set). You will have to fabricate your own brackets as I couldn't find ANY that would fit. I don't know how they would hold up on real track use...but for show, they've been great

Cipher Auto!, Automotive Parts Accessories & Universal Racing Seats

KamiSpeed · 02-23-2013, 05:27 AM

for all the bride questions, depending on the seat there are different rails. someone said RO for Gias/Stradia and it drop 1-2 inches (someone measure 1.25). You can also get the regular or super low cushion for the drop. you can use the oem seatbelt though it might require a bit of ingenuity to figure out where to bolt clip down. there are more than just the bride and stradia, I'm somewhat partial to their new Euroster seats

bergkamp · 02-25-2013, 02:47 PM

Quote:

Originally Posted by Fly1 Motorsports

I threw on some Cipher Auto seats before SEMA. Not bad considering the price point ($700-800/set). You will have to fabricate your own brackets as I couldn't find ANY that would fit. I don't know how they would hold up on real track use...but for show, they've been great

Cipher Auto!, Automotive Parts Accessories & Universal Racing Seats

These look sickkkkkk

TerribleONE · 02-25-2013, 03:06 PM

danegrey · 03-01-2013, 05:18 AM

Great thread, which leaves me more confused then ever....
Plan on some Autocross this year, and want a little more support...
but on this on height drives me up a wall and is my biggest fear
6'3" about 220, so with a helmet it gives me some concern,
but all this helps...

Thanks everyone for there comments

bullitt5897 · 03-01-2013, 08:27 AM

Quote:

Originally Posted by danegrey

Great thread, which leaves me more confused then ever....
Plan on some Autocross this year, and want a little more support...
but on this on height drives me up a wall and is my biggest fear
6'3" about 220, so with a helmet it gives me some concern,
but all this helps...

Thanks everyone for there comments

Any Bride Low Max or Recaro Pole position XL

I am 6'2"

Punk86 · 03-01-2013, 10:43 AM

I am getting ready to install some Recaro Pole Positions next week! Ill post some pics once they are in.

gomer_110 · 03-01-2013, 11:03 AM

Quote:

Originally Posted by Bullitt@UAMotorsports

Any Bride Low Max or Recaro Pole position XL

I am 6'2"

Just be careful with the Bride Low Max seats. I'm around 220 and can tell you that the Vios are a little on the tight side for my size.

11-15-2012, 10:22 PM	#257 (permalink)
kevr6 A True Z Fanatic Join Date: Feb 2009 Location: N.W. Atlanta Posts: 1,515 Drives: '09 Graphite 370Z 6M Rep Power: 666	My Sparco seats __________________ *Beware...* Daily Sliding In My ZLED!

12-22-2012, 11:19 AM	#258 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	Here's an update to my seats: I pulled out the fixed back Sparco Pro 2000 seats and installed Bride adjustables and Takata Drift II harnesses. I had the Drift IIIs at first, but the IIs just work better/easier for me. I chose these harnesses because I wanted Takata's that are street legal in Europe and the US. I also took out the OEM bar in the back and installed Robispec's chassis/harness bar, which I wrapped the Takata's around. Drift II on left / Drift III on right GaleForce and Rusty like this.

12-31-2012, 06:33 PM	#260 (permalink)
Bandit_Kaine Base Member Join Date: Jun 2012 Location: Miami Age: 34 Posts: 224 Drives: 16-370Z Nismo-PW-MT Rep Power: 13	If I get bride stradia ii and bride RO rails how much lower than stock will it be? Also stock seat belt will work? And last question, does seat have any adjustability besides the back? __________________

01-18-2013, 06:57 AM	#262 (permalink)
gozfast Base Member Join Date: Mar 2010 Location: Earth Posts: 67 Drives: 370Z Sport Rep Power: 15	I have the Stradia's I have the Bride Stradia II Sport's with the bride rails and they are 1.25" lower than stock. They weigh exactly the same as the stock seats and rails by the way, and make sure you don't have more than a 32" waist. They hold you in place great though, and the thigh bolsters aren't annoyingly large like the Gias. Only the back adjusts for tilt, no other adjustments, and the rails slide of course front to back. I purchased mine thru RavSpec and I got the RO rails. Last edited by gozfast; 01-18-2013 at 07:03 AM.

02-23-2013, 05:27 AM	#264 (permalink)
KamiSpeed A True Z Fanatic Join Date: Feb 2011 Location: Orlando, FL Posts: 5,888 Drives: 09 370z Rep Power: 25	for all the bride questions, depending on the seat there are different rails. someone said RO for Gias/Stradia and it drop 1-2 inches (someone measure 1.25). You can also get the regular or super low cushion for the drop. you can use the oem seatbelt though it might require a bit of ingenuity to figure out where to bolt clip down. there are more than just the bride and stradia, I'm somewhat partial to their new Euroster seats __________________ KAMISPEED \| SHOP 370Z PERFORMANCE PARTS & MODS \| SUPPORT@KAMISPEED.COM KAMI SPEED REVIEWS \| FINANCE YOUR PARTS WITH US \| MILITARY & FIRST RESPONDERS PRE-ORDER DEPOSIT PROGRAM \| HKS MASTER SELLER

01-18-2013, 06:45 PM	#263 (permalink)
Fly1 Motorsports Premium Member Join Date: Jan 2009 Location: Los Angeles Posts: 1,094 Drives: PW 370Z 7AT/Tr/Sp/Nv Rep Power: 18	I threw on some Cipher Auto seats before SEMA. Not bad considering the price point ($700-800/set). You will have to fabricate your own brackets as I couldn't find ANY that would fit. I don't know how they would hold up on real track use...but for show, they've been great Cipher Auto!, Automotive Parts Accessories & Universal Racing Seats

02-25-2013, 03:06 PM	#266 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	__________________ 638WHP 541WTQ @ 13.5PSI Build thread

03-01-2013, 05:18 AM	#267 (permalink)
danegrey A True Z Fanatic Join Date: Oct 2011 Location: Knoxville Age: 71 Posts: 3,190 Drives: 12 370Z BK Cherry M6 Rep Power: 649540	Great thread, which leaves me more confused then ever.... Plan on some Autocross this year, and want a little more support... but on this on height drives me up a wall and is my biggest fear 6'3" about 220, so with a helmet it gives me some concern, but all this helps... Thanks everyone for there comments __________________ Lots of Changes the Z needs to be driven and driven hard for the car lives for it

03-01-2013, 10:43 AM	#269 (permalink)
Punk86 Enthusiast Member Join Date: Aug 2010 Location: New Orleans, Louisiana Posts: 467 Drives: a neck breaker Rep Power: 15	I am getting ready to install some Recaro Pole Positions next week! Ill post some pics once they are in. __________________ BC Racing Coilovers \|\| Stillen G3s \|\| Invidia CBE \|\| Work VS-XX \|\| Full Lip Kit Riding Low and Slow My Journal Thread!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aftermarket seats with heaters	TBOX	Exterior & Interior	1	03-27-2011 10:52 AM
Lets re-think about parking too far away..	LuckyJinx	Nissan 370Z General Discussions	83	01-10-2011 07:54 AM
Lets have some laughs	RiCharlie	Nissan 370Z General Discussions	81	11-25-2010 08:50 AM
aftermarket seats / height	konsol	Nissan 370Z General Discussions	2	02-11-2010 09:37 AM
For anyone planning aftermarket seats (Sparco, Recaro etc)..LA Peeps Please read..>	Modshack	Exterior & Interior	7	05-11-2009 08:31 AM