Lets see your aftermarket seats!

sig11 · 05-15-2012, 11:00 PM

I'll have to snap a picture... basically went from stretching my neck and hitting my helmet on the roof to having probably an inch gap.

NissanGuy23 · 06-04-2012, 06:49 PM

Does the Sparco Chrono Road fit in the 370?

edconline · 07-23-2012, 12:40 AM

Status Racing Ring (Driver) and Ring GT (Passenger) seats with 5-point Status Racing harnesses:

Would definitely like to get a lower mount for the seats set up, height is a good inch and half higher than stock with the side brackets, sliders and seat bases. I have brought it up to Status and they said they are looking into some lower mounting solutions for the seats.

sig11 · 07-23-2012, 08:59 AM

Looks great. I've been really happy with my Status seat. Did you get FRP, CF, or Kevlar?

Did you use the Planted/425 Motorsports seat bracket? Mine wasn't even level... I was pretty unhappy with the bracket.

edconline · 07-23-2012, 12:14 PM

Thanks, both seats are CF. You can see the weave in the one shot from the back. The drivers side mount is Wedge Engineering and the passenger side is Planted. You are correct, the planted mount is not level, I meant to bring that up to Status as well. Using the center holes on the side mount bracket for the left hand side and the top holes on the right hand side bracket leveled it right out, however that should hardly have been necessary.

martin82 · 07-24-2012, 12:56 AM

I bought recaro pole positions, with the recaro side mount and rails it comes with, the seat is way too high. Only solution I see if fix mounted without rails, but I'd really like to have sliders so I can have other people beside me drive my car (instructors) ideas?

rts_kaneda · 07-24-2012, 05:52 AM

Don't know how it would look in the 370Z, but I remember the Porsche 997 GT3 Carbon Backed seats looked absolutely amazing in a 300ZX.

Someone should photoshop and see what it would look like.

martin82 · 07-24-2012, 06:55 PM

any more ideas with rails/mounts? I need super low ones, on the stock ones with helmet is a bit tight...

martin82 · 07-25-2012, 04:03 PM

my custom leather upholstered recaro pole positions with yellow stitching. Schroth Profi- II harness.....

Picked up my harness bar, still need to deal with mounting/sliders.............

anthonyy · 07-25-2012, 04:46 PM

wow that yellow stitching..

TerribleONE · 07-25-2012, 05:00 PM

Reaper42 · 07-25-2012, 05:17 PM

Quote:

Originally Posted by NissanGuy23

Does the Sparco Chrono Road fit in the 370?

was wondering this as well....anyone?

vividracing · 07-25-2012, 05:33 PM

Quote:

Originally Posted by Reaper42

was wondering this as well....anyone?

From what I can tell, it might be tight. Those are 36.5 inches tall and 22.5 wide at the wings. Thats a little taller than most seats. In comparison, the Bride Zeta III and Status Ring are 34 inches high, The Zeta III is 23 inches at the wings, and the Ring is about 22.5.

Volk Z · 07-25-2012, 05:37 PM

Has anyone tried like the buddy club brackets for a 350z?
They are two seperate rails I used on my Z and it was slightly lower then the stock height and was about 2 inches lower then the wedge engineering.

Volk Z · 08-21-2012, 10:41 PM

Quote:

Originally Posted by martin82

any more ideas with rails/mounts? I need super low ones, on the stock ones with helmet is a bit tight...

Bride FO rails... They are level and about 1.5 inches lower then the planted bases. They fit a Status Ring seat NOT a Ring GT though.

07-23-2012, 12:40 AM	#228 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	Status Racing Ring (Driver) and Ring GT (Passenger) seats with 5-point Status Racing harnesses: Would definitely like to get a lower mount for the seats set up, height is a good inch and half higher than stock with the side brackets, sliders and seat bases. I have brought it up to Status and they said they are looking into some lower mounting solutions for the seats. GaleForce and mag_black like this. __________________ View Journal Audio Build

07-23-2012, 12:14 PM	#230 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	Thanks, both seats are CF. You can see the weave in the one shot from the back. The drivers side mount is Wedge Engineering and the passenger side is Planted. You are correct, the planted mount is not level, I meant to bring that up to Status as well. Using the center holes on the side mount bracket for the left hand side and the top holes on the right hand side bracket leveled it right out, however that should hardly have been necessary. __________________ View Journal Audio Build

07-24-2012, 05:52 AM	#232 (permalink)
rts_kaneda Base Member Join Date: Jul 2012 Location: Perth, Australia Posts: 12 Drives: 11 370Z A54 M6 Rep Power: 13	Don't know how it would look in the 370Z, but I remember the Porsche 997 GT3 Carbon Backed seats looked absolutely amazing in a 300ZX. Someone should photoshop and see what it would look like. exedy699 and Krimzon7 like this.

07-25-2012, 05:00 PM	#236 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	__________________ 638WHP 541WTQ @ 13.5PSI Build thread

07-25-2012, 05:37 PM	#239 (permalink)
Volk Z A True Z Fanatic Join Date: Aug 2011 Location: Laguna Beach, CA Posts: 2,214 Drives: Nismo Z Rep Power: 3066	Has anyone tried like the buddy club brackets for a 350z? They are two seperate rails I used on my Z and it was slightly lower then the stock height and was about 2 inches lower then the wedge engineering. __________________ AMUSE * TOMEI * STILLEN * CRAFTSQUARE RECARO * 3M * TOP SECRET * SLICKCARBON

05-15-2012, 11:00 PM	#226 (permalink)
sig11 A True Z Fanatic Join Date: Jun 2009 Location: Detroit Posts: 1,294 Drives: 09 370Z Red Sport-MT Rep Power: 18	I'll have to snap a picture... basically went from stretching my neck and hitting my helmet on the roof to having probably an inch gap.

06-04-2012, 06:49 PM	#227 (permalink)
NissanGuy23 Track Member Join Date: Oct 2011 Location: West Chester, PA Age: 36 Posts: 752 Drives: 09 370Z NISMO PG 6MT Rep Power: 15	Does the Sparco Chrono Road fit in the 370?

07-23-2012, 08:59 AM	#229 (permalink)
sig11 A True Z Fanatic Join Date: Jun 2009 Location: Detroit Posts: 1,294 Drives: 09 370Z Red Sport-MT Rep Power: 18	Looks great. I've been really happy with my Status seat. Did you get FRP, CF, or Kevlar? Did you use the Planted/425 Motorsports seat bracket? Mine wasn't even level... I was pretty unhappy with the bracket.

07-24-2012, 12:56 AM	#231 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	I bought recaro pole positions, with the recaro side mount and rails it comes with, the seat is way too high. Only solution I see if fix mounted without rails, but I'd really like to have sliders so I can have other people beside me drive my car (instructors) ideas?

07-24-2012, 06:55 PM	#233 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	any more ideas with rails/mounts? I need super low ones, on the stock ones with helmet is a bit tight...

07-25-2012, 04:46 PM	#235 (permalink)
anthonyy A True Z Fanatic Join Date: Apr 2011 Location: Los Gatos, CA Posts: 1,027 Drives: Lexus CT Rep Power: 16	wow that yellow stitching..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aftermarket seats with heaters	TBOX	Exterior & Interior	1	03-27-2011 10:52 AM
Lets re-think about parking too far away..	LuckyJinx	Nissan 370Z General Discussions	83	01-10-2011 07:54 AM
Lets have some laughs	RiCharlie	Nissan 370Z General Discussions	81	11-25-2010 08:50 AM
aftermarket seats / height	konsol	Nissan 370Z General Discussions	2	02-11-2010 09:37 AM
For anyone planning aftermarket seats (Sparco, Recaro etc)..LA Peeps Please read..>	Modshack	Exterior & Interior	7	05-11-2009 08:31 AM